amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Baby Crocodile Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 89 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
2/3
Zeit
~3 Std.
Größe
6.8 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

A free crochet crocodile pattern for a friendly baby croc that lies on its belly with a long snout and a toothy smile. This amigurumi crocodile is green with a pale lime belly, a row of six darker bumps down its back, bobbing eye bumps and little white teeth stitched along the jaw. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook, measures about 22 cm (8.7 in) long and 7 cm (2.7 in) tall, and the head, eye bumps, back bumps and four paddle legs are sewn onto a one-piece body and tail. Follow it row by row with stitch counts and turn the interactive 3D model to see where every piece goes.

Baby Crocodile häkeln

Mittel · 7 cm hoch · etwa 3 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 14 Teile in Runden: Body and tail, Head and snout, Eye bump ×2, Back bump ×6, Front leg ×2, Back leg ×2 (insgesamt 89 Runden).
  2. Fülle und montiere in 6 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 8 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 64 Runden fertig

  1. Size before assembly: about 5.9 cm at the widest, 12.1 cm long; 32 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. colours of round 1 in order: 2 sc in green, 2 sc in bellygreen, 2 sc in green
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: an oval about 8.1 × 6.1 cm at the widest, 12 cm long; 32 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. With green: ch 7.
  3. colours of round 1 in order: 4 sc in green, 6 sc in bellygreen, 4 sc in green
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly, then press the piece slightly flat (oval cross-section; flattened 12 %).

  1. Size before assembly: about 2.8 cm at the widest, 1.8 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Of these: top — 1; front — 1; low — 1; upper — 1; middle — 1; side — 1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2.4 cm at the widest, 2.4 cm long; 8 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 1.2 cm thick.<!-- flattened 50 % -->

  1. Size before assembly: about 2.4 cm at the widest, 2.4 cm long; 8 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 1.2 cm thick.<!-- flattened 50 % -->

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eye with a printed glint 10 mm (on the Eye bump) (2: one on each Eye bump; the left one is described, the right is its mirror): in round 2, on the centre front line.
  • Satin stitch (on the Head and snout) (2, symmetric: the toy's left side is described, the right is its mirror image): in brown thread, a oval about 3 mm wide and 3 mm tall, horizontal stitches; centred between rounds 1 and 2, 1 st from the centre top line, toward the toy's right .
  • Embroidery in brown thread (on the Head and snout) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 1 and 2, 4 st from the centre top line, toward the toy's left ) → (in round 6, 8.5 st from the centre top line, toward the toy's left) → (in round 11, 8 st from the centre top line, toward the toy's left ) → (between rounds 15 and 16, 8.5 st from the centre top line, toward the toy's left ).
  • Satin stitch (on the Head and snout) (2, symmetric: the toy's left side is described, the right is its mirror image): in white thread in several layers so it stands out, a triangle about 4.2 mm wide and 4.2 mm tall, horizontal stitches, turned 180° clockwise (looking at that surface); centred between rounds 6 and 7, 8 st from the centre top line, toward the toy's left .
  • Satin stitch (on the Head and snout) (2, symmetric: the toy's left side is described, the right is its mirror image): in white thread in several layers so it stands out, a triangle about 4.2 mm wide and 4.2 mm tall, horizontal stitches, turned 180° clockwise (looking at that surface); centred between rounds 10 and 11, 8 st from the centre top line, toward the toy's left .
  • Satin stitch (on the Head and snout) (2, symmetric: the toy's left side is described, the right is its mirror image): in white thread in several layers so it stands out, a triangle about 4.2 mm wide and 4.2 mm tall, horizontal stitches, turned 180° clockwise (looking at that surface); centred between rounds 14 and 15, 8 st from the centre top line, toward the toy's left .

Abkürzungen

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung