amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Meerestiere

Sad Blobfish Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 46 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorMeerestiere

Schwierigkeit
1/3
Zeit
~2 Std.
Größe
7.1 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet blobfish pattern: a Sad Blobfish amigurumi, about 7 cm tall in DK yarn with a 2.5 mm hook. A droopy pink blobfish with a big soft nose, saggy cheeks, tiny sad eyes with worried brows and a down-turned stitched mouth. You need about 45 m of yarn: 30 m pink, 10 m light pink and 5 m deep pink. Plan on roughly 2 hours. Make it as a gift for anyone who loves odd sea creatures or as a cheerfully gloomy shelf companion; spin the 3D model and follow the exact round-by-round pattern to crochet it.

Sad Blobfish häkeln

Für Anfänger · 7 cm hoch · etwa 2 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 7 Teile in Runden: Blob body, Tail, Tiny fin ×2, Saggy jowl ×2, Big droopy nose (insgesamt 46 Runden).
  2. Fülle und montiere in 5 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 8 bereit

Maschenprobe

Mehr wie dieses

Alles in meerestiere →
  • Vorschau von Tiny Blue Turtle
    Generator
    HäkelnRemix

    Tiny Blue Turtle

    vom Anleitungsgenerator

RemixHäkeln

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 42 Runden fertig

  1. Size before assembly: about 7.7 cm at the widest, 5.2 cm long; 24 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (moderately) and keep adding as you decrease.
  3. Press the piece flat to about 6.9 cm thick (oval cross-section).<!-- press the piece flat by 10 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.7 cm at the widest, 1.8 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 7 mm thick.<!-- flattened 60 % -->

  1. Size before assembly: about 1.3 cm at the widest, 1.1 cm long; 4 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 60 % -->

  1. A flat circle about 2.3 cm across; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2.7 cm at the widest, 2.7 cm long; 9 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 10 stitches of the last round, pull tight and hide the end inside. Bend ≈ 45° around round 6<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 6, on the centre top line). On the inner side draw rounds 4 and 7 together (3 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 5 st, pull to the angle and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10 mm (on the blob body): between rounds 18 and 19, 16 st apart (count along round 18: about 8.2 st each side of the centre top line).
  • Embroidery in brown thread (on the blob body), straight stitches through: (in round 16, 7 st from the centre bottom line, toward the toy's left ) → (between rounds 17 and 18, 3.5 st from the centre bottom line, toward the toy's left ) → (in round 19, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 19 and 20, on the centre bottom line ) → (in round 19, 1 st from the centre bottom line, toward the toy's right ) → (between rounds 17 and 18, 3.5 st from the centre bottom line, toward the toy's right ) → (in round 16, 7 st from the centre bottom line, toward the toy's right ).
  • Embroidery in brown thread (on the blob body), straight stitches through: (in round 19, 3 st from the centre top line, toward the toy's left ) → (between rounds 18 and 19, 6.5 st from the centre top line, toward the toy's left ) → (in round 17, 9.5 st from the centre top line, toward the toy's left ).
  • Embroidery in brown thread (on the blob body), straight stitches through: (in round 19, 3 st from the centre top line, toward the toy's right ) → (between rounds 18 and 19, 6.5 st from the centre top line, toward the toy's right ) → (in round 17, 9.5 st from the centre top line, toward the toy's right ).

Blob body · R1–R3

MR××××××VVVVVV×V×V×V×

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Pink Starfish in Green Shorts
    Generator
    HäkelnRemix

    Pink Starfish in Green Shorts

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von No-Sew Mini Whale
    Generator
    HäkelnRemix

    No-Sew Mini Whale

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von No-Sew Narwhal
    Generator
    HäkelnRemix

    No-Sew Narwhal

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Squid Keychain
    Generator
    HäkelnRemix

    Squid Keychain

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Worry Octopus
    Generator
    HäkelnRemix

    Worry Octopus

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Seal Doing a Belly Flop
    Generator
    HäkelnRemix

    Seal Doing a Belly Flop

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Kraken in a Teacup
    Generator
    HäkelnRemix

    Kraken in a Teacup

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Axolotl Leaning on a Heart
    Generator
    HäkelnRemix

    Axolotl Leaning on a Heart

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Gamer Axolotl with Headphones
    Generator
    HäkelnRemix

    Gamer Axolotl with Headphones

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Seahorse Holding a Pearl
    Generator
    HäkelnRemix

    Seahorse Holding a Pearl

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Offended Puffed-Up Pufferfish
    Generator
    HäkelnRemix

    Offended Puffed-Up Pufferfish

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • V×V×V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done