amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Bunny Lovey with Knotted Blanket Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 83 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
2/3
Zeit
~3 Std.
Größe
15 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet bunny lovey pattern: a Bunny Lovey with Knotted Blanket amigurumi, about 15 cm tall in DK yarn with a 2.5 mm hook. A cream bunny head with long floppy ears and pink cheeks rests on a soft sage blanket with four knotted corners. You need about 100 m of yarn: 45 m sage, 40 m cream, 5 m mint, 5 m pink and 5 m blush. Plan on roughly 3 hours. A sweet baby-shower gift or a cuddle companion for a nursery shelf. Spin the 3D model and follow the round-by-round pattern, including the flat blanket pillow and its little corner knots.

Bunny Lovey with Knotted Blanket häkeln

Mittel · 15 cm hoch · etwa 3 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 10 Teile in Runden: Blanket pillow, Corner knot ×4, Bunny head, Long floppy ear ×2, Cheek ×2 (insgesamt 83 Runden).
  2. Fülle und montiere in 6 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 10 bereit

Mehr wie dieses

Alle Amigurumi-Anleitungen: Hase →Alle Amigurumi-Anleitungen: Schnuffeltuch →Alles in tiere →
  • Vorschau von Winnie-the-Pooh with a Honey Pot
    Generator
    HäkelnRemix

    Winnie-the-Pooh with a Honey Pot

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 64 Runden fertig

  1. Size before assembly: an oval about 10.5 × 4.1 cm at the widest, 10.9 cm long; 32 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the bottom of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 8 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With sage: ch 18.
  3. Change to mint (pull it through on the last yarn-over of R7).
  4. Change to sage (pull it through on the last yarn-over of R9).
  5. → Start stuffing (lightly) and keep adding as you decrease.
  6. Change to mint (pull it through on the last yarn-over of R28).
  7. Change to sage (pull it through on the last yarn-over of R31).
  8. Press the piece flat to about 4.7 cm thick (oval cross-section).<!-- press the piece flat by 55 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Of these: top — 2 (left and right); low — 2 (left and right). Size before assembly: about 1.3 cm at the widest, 1.7 cm long; 5 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 7.8 cm at the widest, 5.5 cm long; 24 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3.2 cm at the widest, 6.8 cm long; 20 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre bottom line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 3.4 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 32 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 50 %) --> Bend ≈ 90° around round 20<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 6 twist 0 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 20, 0.5 st from the centre bottom line, toward the back <!-- st 0.53 back -->). Let it hang still turned the way it is sewn on (pinch it a little at the seam): its inside stays visible, it does not lie against the head.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 9 mm (on the bunny head): in round 12, 9 st apart (count along round 12: about 4.3 st each side of the centre front line).
  • Satin stitch (on the bunny head): in rose thread, a oval about 6 mm wide and 4 mm tall, horizontal stitches; centred in round 14, on the centre front line .
  • Embroidery in dark brown thread (on the bunny head), straight stitches through: (between rounds 14 and 15, on the centre front line ) → (between rounds 15 and 16, 1 st from the centre front line, toward the toy's left ) → (in round 15, 1.5 st from the centre front line, toward the toy's left ).
  • Embroidery in dark brown thread (on the bunny head), straight stitches through: (between rounds 14 and 15, on the centre front line ) → (between rounds 15 and 16, 1 st from the centre front line, toward the toy's right ) → (in round 15, 1.5 st from the centre front line, toward the toy's right ).

Abkürzungen

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    vom Anleitungsgenerator
    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Tigger the Bouncy Tiger
    Generator
    HäkelnRemix

    Tigger the Bouncy Tiger

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Speedy Blue Hedgehog
    Generator
    HäkelnRemix

    Speedy Blue Hedgehog

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von White Beagle with Black Ears
    Generator
    HäkelnRemix

    White Beagle with Black Ears

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Grey Tabby Loaf Cat
    Generator
    HäkelnRemix

    Grey Tabby Loaf Cat

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Confused Yellow Duck
    Generator
    HäkelnRemix

    Confused Yellow Duck

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Pudding Puppy in a Beret
    Generator
    HäkelnRemix

    Pudding Puppy in a Beret

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Electric Yellow Mouse
    Generator
    HäkelnRemix

    Electric Yellow Mouse

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Piglet in a Green Jumper
    Generator
    HäkelnRemix

    Piglet in a Green Jumper

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Peter Rabbit in a Blue Jacket
    Generator
    HäkelnRemix

    Peter Rabbit in a Blue Jacket

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Bunny in a Pink Hood
    Generator
    HäkelnRemix

    Bunny in a Pink Hood

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Simple White Bunny in a Dress
    Generator
    HäkelnRemix

    Simple White Bunny in a Dress

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0