amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Capybara with a Bauble Hat Ornament Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 60 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
1/3
Zeit
~2 Std.
Größe
7.7 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet capybara ornament pattern: a Capybara with a Bauble Hat Ornament amigurumi, about 8 cm tall in fingering yarn with a 2.0 mm hook. It is a calm brown capybara with half-closed eyes, a red-and-white bauble balanced on its head and a tiny duckling sitting on top. You need about 65 m of yarn: 20 m brown, 10 m red, 5 m tan, 5 m yellow, 5 m gold, 5 m white, 5 m dark brown, 5 m pink and 5 m orange. Plan on roughly 2 hours. Make it as a a tree ornament or a gift for capybara lovers. Spin the 3D model and follow the round-by-round pattern.

Capybara with a Bauble Hat Ornament häkeln

Für Anfänger · 8 cm hoch · etwa 2 Std. · Garn fingering · Häkelnadel 2 mm

  1. Häkle die 11 Teile in Runden: Head-body, Snout, Ear ×2, Bauble hat, Bauble cap, Hanging loop, Duckling, Beak, Cheek ×2 (insgesamt 60 Runden).
  2. Fülle und montiere in 9 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 14 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 54 Runden fertig

  1. Size before assembly: an oval about 6 × 3.9 cm at the widest, 4.1 cm long; 20 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs front to back; the starting chain is at the bottom of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
  2. With brown: ch 9.
  3. → Start stuffing (firmly) and keep adding as you decrease.
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 2.6 × 1.7 cm at the widest, 1.1 cm long; 5 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With tan: ch 5.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.6 cm at the widest, 1.2 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a dish: rounds 1–2 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 1.8 mm at the centre) and turn rounds 3–5 to the back: they make a thick rounded rim (about 5.9 mm thick) and lie behind as a second layer; the piece is about 16 mm across.<!-- (dish 70 %) -->

  1. Size before assembly: about 3.5 cm at the widest, 2.4 cm long; 14 rounds.
  2. Change to white (pull it through on the last yarn-over of R5).
  3. Change to red (pull it through on the last yarn-over of R7).
  4. → Start stuffing (firmly) and keep adding as you decrease.
  5. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1 cm at the widest, 0.7 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.3 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in gold (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 14 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

  1. Size before assembly: about 1.7 cm at the widest, 1.4 cm long; 7 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 0.6 cm at the widest (lies flat); 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 1.2 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Embroidery in chocolate brown thread (on the head-body) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 16, 2.5 st from the centre front line, toward the toy's left ) → (in round 16, 3 st from the centre front line, toward the toy's left ) → (between rounds 15 and 16, 4 st from the centre front line, toward the toy's left ) → (in round 16, 4 st from the centre front line, toward the toy's left ) → (in round 16, 4.5 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the snout): in chocolate brown thread, a oval about 5 mm wide and 2.8 mm tall, horizontal stitches; centred in round 1, on the centre top line .
  • Embroidery in chocolate brown thread (on the snout), straight stitches through: (in round 2, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 0.5 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, on the centre bottom line ) → (between rounds 2 and 3, 0.5 st from the centre bottom line, toward the toy's right ) → (in round 2, 1 st from the centre bottom line, toward the toy's right ).
  • Safety eyes 5 mm (on the duckling): between rounds 6 and 7, 3 st apart (count along round 6: about 1.3 st each side of the centre front line).

Abkürzungen

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung