Cute Chupacabra häkeln: Anleitung (PDF kostenlos)

R1with sage green: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7(5 sc, inc) ×6(42)
R83 sc, (inc, 6 sc) ×5, inc, 3 sc(48)
R9[ivory] 3 sc [sage green] 4 sc, inc, 7 sc, inc, 7 sc, inc, 7 sc, inc, 7 sc, inc, 4 sc [ivory] 3 sc, inc(54)
R10(BLO)4 sc in ivory, 44 sc in sage green, 6 sc in ivory(54)
R115 sc in ivory, 42 sc in sage green, 7 sc in ivory(54)
R126 sc in ivory, 40 sc in sage green, 8 sc in ivory(54)
R13–146 sc in ivory, 39 sc in sage green, 9 sc in ivory(54)
R15[ivory] 5 sc [sage green] 2 sc, dec, 7 sc, dec, 7 sc, dec, 7 sc, dec, 7 sc, dec [ivory] 7 sc, dec(48)
R16–175 sc in ivory, 35 sc in sage green, 8 sc in ivory(48)
R184 sc in ivory, 37 sc in sage green, 7 sc in ivory(48)
R19[ivory] 2 sc [sage green] 4 sc, dec, 6 sc, dec, 6 sc, dec, 6 sc, dec, 6 sc, dec, 1 sc [ivory] 5 sc, dec(42)
Size before assembly: about 7.4 cm at the widest, 5.5 cm long; 19 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1starting in the 2nd ch from hook: sc 2, 3 sc in the last ch; continue along the other side of the chain: sc 1, 2 sc in the last ch (the one you made the first sc in)(8)
R2(inc ×3, 1 sc) ×2(14)
R31 sc, inc, 1 sc, inc, 1 sc, inc, 3 sc, inc, 1 sc, inc, 1 sc, inc(20)
R42 sc, inc, 1 sc, inc, 1 sc, inc, 6 sc, inc, 1 sc, inc, 1 sc, inc, 2 sc(26)
R5–726 sc(26)
Size before assembly: an oval about 3.8 × 3 cm at the widest, 2 cm long; 7 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
With ivory: ch 4.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with sage green: 6 sc in MR(6)
R2inc ×6(12)
R3(3 sc, inc) ×3(15)
R4–515 sc(15)
R62 sc, (dec, 3 sc) ×2, dec, 1 sc(12)
R7–812 sc(12)
Size before assembly: about 2 cm at the widest, 2.5 cm long; 8 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with ivory: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R6–830 sc(30)
R9(3 sc, dec) ×6(24)
R1024 sc(24)
R11(2 sc, dec) ×6(18)
Size before assembly: about 4 cm at the widest, 3.1 cm long; 11 rounds.
Change to sage green (pull it through on the last yarn-over of R4).
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with sage green: 4 sc in MR(4)
R2(1 sc, inc) ×2(6)
R3(2 sc, inc) ×2(8)
R42 sc, inc, 3 sc, inc, 1 sc(10)
R5(4 sc, inc) ×2(12)
R63 sc, inc, 5 sc, inc, 2 sc(14)
R7(6 sc, inc) ×2(16)
R8–1116 sc(16)
Size before assembly: about 2.1 cm at the widest, 3.8 cm long; 11 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 50° around round 5. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 5, on the centre top line). On the inner side draw rounds 4 and 6 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 3 st, pull to the angle and hide the end inside.

R1with olive: 4 sc in MR(4)
R2inc ×3, 1 sc(7)
R31 sc, inc, 1 sc, inc, 1 sc, inc, 1 sc(10)
R41 sc, inc, 2 sc, inc, 2 sc, inc, 2 sc(13)
R53 sc, inc, 3 sc, inc, 3 sc, inc, 1 sc(16)
R616 sc(16)
Of these: on the head — 1; on the body — 2; on the tail — 1. Size before assembly: about 2.1 cm at the widest, 1.8 cm long; 6 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 16–18 mm (on the head): between rounds 15 and 16, 11 st apart (count along round 15: about 5.3 st each side of the centre front line).
Satin stitch (on the muzzle): in charcoal thread, a oval about 8 mm wide and 5 mm tall, horizontal stitches; centred in round 1, on the centre top line .
Embroidery in charcoal thread (on the muzzle), straight stitches through: (between rounds 1 and 2, on the centre bottom line) → (in round 2, on the centre bottom line ).
Embroidery in charcoal thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, on the centre bottom line ) → (between rounds 2 and 3, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 1.5 st from the centre bottom line, toward the toy's left ).
Satin stitch (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image): in cream thread in several layers so it stands out, a triangle about 5 mm wide and 6 mm tall, horizontal stitches, turned 180° clockwise (looking at that surface); centred between rounds 2 and 3, 1 st from the centre bottom line, toward the toy's left .