amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Fantasie

Dragon with Coffee Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 120 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorFantasie

Schwierigkeit
3/3
Zeit
~4 Std.
Größe
14.3 cm
Schrägheit
2/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet dragon pattern: a Dragon with Coffee amigurumi, about 14 cm tall in DK yarn with a 2.5 mm hook. A chubby purple dragon with a lilac belly, gold horns and back spikes, sleepy half-closed eyes and a big cream mug of coffee held in its paws. You need about 130 m of yarn: 80 m purple, 20 m lilac, 15 m cream, 10 m gold and 5 m brown. Plan on roughly 4 hours. A cosy desk buddy or a gift for coffee lovers and dragon fans. Spin the 3D model and follow the round-by-round pattern to make your own sleepy morning dragon.

Dragon with Coffee häkeln

Fortgeschritten · 14 cm hoch · etwa 4 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 20 Teile in Runden: Body, Mug, Head, Muzzle, Horn ×2, Leg ×2, Tail, Wing ×2, Spike ×6, Mug handle, Arm ×2 (insgesamt 124 Runden).
  2. Fülle und montiere in 16 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 10 bereit

Mehr wie dieses

Alle Amigurumi-Anleitungen: Drache →Alles in fantasie →
  • Vorschau von Green Dino with a Red Saddle
    Generator
    HäkelnRemix

    Green Dino with a Red Saddle

    vom Anleitungsgenerator

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 106 Runden fertig

  18. Size before assembly: about 7.4 cm at the widest, 5.5 cm long; 19 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  19. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  13. Size before assembly: about 4.8 cm at the widest, 3.3 cm long; 15 rounds.
  14. Change to brown (pull it through on the last yarn-over of R12).
  15. → Start stuffing (firmly) and keep adding as you decrease.
  16. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  27. Size before assembly: about 8.9 cm at the widest, 7.1 cm long; 29 rounds.
  28. → Start stuffing (firmly) and keep adding as you decrease.
  29. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  6. Size before assembly: an oval about 4.2 × 3 cm at the widest, 2 cm long; 7 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  7. With lilac: ch 5.
  8. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  7. Size before assembly: about 1.6 cm at the widest, 1.9 cm long; 6 rounds.
  8. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  10. Size before assembly: about 4 cm at the widest, 3.1 cm long; 11 rounds.
  11. Change to purple (pull it through on the last yarn-over of R4).
  12. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  13. Size before assembly: about 3.2 cm at the widest, 4.5 cm long; 13 rounds.
  14. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 45° around round 5<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 5, on the centre top line). On the inner side draw rounds 4 and 6 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 3 st, pull to the angle and hide the end inside.

  8. Size before assembly: about 3.2 cm at the widest, 2.1 cm long; 7 rounds.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 3.1 mm deep in front, a rounded back; about 32 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) -->

  5. Of these: on the head — 2; on the body — 2; on the tail — 2. Flat motif — triangle (worked in turned rows, one layer of fabric), about 1.4 × 2.4 cm; 4 rows.
  6. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  3. Size before assembly: about 2.3 cm at the widest, 1.1 cm long; 3 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in cream (same rounds, no colour changes).
  4. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 18 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

  7. Size before assembly: about 2 cm at the widest, 3.3 cm long; 10 rounds.
  8. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Blush about 11 mm, dry pastel or blush (on the head, both sides): between rounds 18 and 19, 7.5 st from the centre front line, toward the toy's left . Colour pink.
  • Embroidery in plum thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 1 and 2, 1 st from the centre top line, toward the toy's left ) → (in round 2, 1.5 st from the centre top line, toward the toy's left ).
  • Embroidery in plum thread (on the body), straight stitches through: (between rounds 11 and 12, 6.5 st from the centre front line, toward the toy's right ) → (between rounds 11 and 12, 3 st from the centre front line, toward the toy's right ) → (between rounds 11 and 12, on the centre front line) → (between rounds 11 and 12, 3 st from the centre front line, toward the toy's left ) → (between rounds 11 and 12, 6.5 st from the centre front line, toward the toy's left ).
  • Embroidery in plum thread (on the body), straight stitches through: (between rounds 14 and 15, 7 st from the centre front line, toward the toy's right ) → (between rounds 14 and 15, 3.5 st from the centre front line, toward the toy's right ) → (between rounds 14 and 15, on the centre front line) → (between rounds 14 and 15, 3.5 st from the centre front line, toward the toy's left ) → (between rounds 14 and 15, 7 st from the centre front line, toward the toy's left ).
  • Embroidery in plum thread (on the body), straight stitches through: (between rounds 17 and 18, 5.5 st from the centre front line, toward the toy's right ) → (between rounds 17 and 18, 3 st from the centre front line, toward the toy's right ) → (between rounds 17 and 18, on the centre front line) → (between rounds 17 and 18, 3 st from the centre front line, toward the toy's left ) → (between rounds 17 and 18, 5.5 st from the centre front line, toward the toy's left ).
  • Embroidery in plum thread (on the muzzle), straight stitches through: (in round 2, 0.5 st from the centre top line, toward the toy's right ) → (between rounds 2 and 3, 0.5 st from the centre top line, toward the toy's right ) → (in round 3, on the centre top line ) → (between rounds 2 and 3, 0.5 st from the centre top line, toward the toy's left ) → (in round 2, 0.5 st from the centre top line, toward the toy's left ).
  • Embroidered eyes (on the head): in black thread, a oval about 13 mm wide and 11 mm tall, horizontal stitches; centred between rounds 14 and 15, 5 st from the centre front line, toward the toy's left .

Body · R1–R5

MR××××××VVVVVV×V×V×V

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Big Grey Forest Spirit
    Generator
    HäkelnRemix

    Big Grey Forest Spirit

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Black Baby Dragon
    Generator
    HäkelnRemix

    Black Baby Dragon

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Blue Alien with Big Ears
    Generator
    HäkelnRemix

    Blue Alien with Big Ears

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Little Spider Hero
    Generator
    HäkelnRemix

    Little Spider Hero

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Sleepy Big Belly Bear
    Generator
    HäkelnRemix

    Sleepy Big Belly Bear

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Little Green Ogre
    Generator
    HäkelnRemix

    Little Green Ogre

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Burlap Sack Doll
    Generator
    HäkelnRemix

    Burlap Sack Doll

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Happy Snowman with Twig Arms
    Generator
    HäkelnRemix

    Happy Snowman with Twig Arms

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Yellow Capsule Helper
    Generator
    HäkelnRemix

    Yellow Capsule Helper

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Ghost in a Mouse Costume
    Generator
    HäkelnRemix

    Ghost in a Mouse Costume

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Pirate Boy in a Straw Hat
    Generator
    HäkelnRemix

    Pirate Boy in a Straw Hat

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Satin stitch (on the head): in purple thread in several layers so it stands out, a oval about 12.5 mm wide and 6 mm tall, horizontal stitches; centred between rounds 15 and 16, 5 st from the centre front line, toward the toy's left .
  • Embroidered eyes (on the head): in black thread, a oval about 13 mm wide and 11 mm tall, horizontal stitches; centred between rounds 14 and 15, 5 st from the centre front line, toward the toy's right .
  • Satin stitch (on the head): in purple thread in several layers so it stands out, a oval about 12.5 mm wide and 6 mm tall, horizontal stitches; centred between rounds 15 and 16, 5 st from the centre front line, toward the toy's right .
    • ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done