amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Fox in Earmuffs Ornament Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 40 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
1/3
Zeit
~2 Std.
Größe
7.8 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet fox ornament pattern: a Fox in Earmuffs Ornament amigurumi, about 8 cm tall in DK yarn with a 2.5 mm hook. An orange fox head with a white muzzle, dark-tipped pointed ears and fluffy white earmuffs joined by a red band. You need about 55 m of yarn: 25 m orange, 15 m white, 5 m red, 5 m dark brown and 5 m light pink. Plan on roughly 2 hours. It makes a sweet tree ornament, a gift for fox fans or a small decoration for a winter window. Turn the 3D model around and follow the pattern round by round.

Fox in Earmuffs Ornament häkeln

Für Anfänger · 8 cm hoch · etwa 2 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 9 Teile in Runden: Head, Ear ×2, Snout, Earmuff ×2, Cheek ×2, Hanging loop (insgesamt 48 Runden).
  2. Fülle und montiere in 6 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 10 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 44 Runden fertig

  1. Size before assembly: about 6.6 cm at the widest, 5.4 cm long; 22 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Change to orange (pull it through on the last yarn-over of R21).
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 3 cm at the widest, 3.3 cm long; 10 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Change to orange (pull it through on the last yarn-over of R3).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 3.1 mm deep in front, a rounded back; about 30 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 50 %) -->

  1. Size before assembly: an oval about 2.2 × 1.8 cm at the widest, 1.1 cm long; 4 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With white: ch 3.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 2.4 cm at the widest, 2.2 cm long; 8 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 2 cm at the widest, 0.7 cm long; 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in red (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the head): in round 12, 7 st apart (count along round 12: about 3.5 st each side of the centre front line).
  • Satin stitch (on the snout): in black thread, a oval about 6 mm wide and 5 mm tall, horizontal stitches; centred between rounds 1 and 2, on the centre top line .
  • Embroidery in brown thread (on the snout), straight stitches through: (in round 2, on the centre bottom line ) → (in round 3, on the centre bottom line ).
  • Embroidery in brown thread (on the snout) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 3, on the centre bottom line ) → (between rounds 3 and 4, 1 st from the centre bottom line, toward the toy's left ) → (in round 3, 1.5 st from the centre bottom line, toward the toy's left ).
  • Strap (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image): with red, ch 15 (≈ 4.3 cm); for a firmer strap sl st back along it. Sew it along (in round 11, 13 st from the centre front line, toward the toy's left ) → (in round 7, 11 st from the centre front line, toward the toy's left ) → (in round 3, 4.5 st from the centre front line, toward the toy's left ) → (in round 1, 1 st from the centre front line, toward the toy's left ), catching it every 2–3 ch.

Head · R1–R5

MR××××××VVVVVV×V×V×V

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done