amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Pflanzen

Heart with Legs Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 79 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorPflanzen

Schwierigkeit
2/3
Zeit
~3 Std.
Größe
11.1 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet heart pattern: a Heart with Legs amigurumi, about 11 cm tall in DK yarn with a 2.5 mm hook. It is a puffy red heart with a shy face, small arms, long thin dark red legs stretched out in front and white sneakers with grey soles. You need about 85 m of yarn: 55 m red, 15 m dark red, 5 m white, 5 m grey and 5 m pink. Plan on roughly 3 hours. It is a sweet Valentine or friendship gift, and the long legs let it sit on a shelf or desk edge. You can spin the 3D model and follow the round-by-round pattern.

Heart with Legs häkeln

Mittel · 11 cm hoch · etwa 3 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 9 Teile in Runden: Heart, Heart lobe ×2, Arm ×2, Cheek ×2, Long leg ×2 (insgesamt 79 Runden).
  2. Fülle und montiere in 5 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 10 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 49 Runden fertig

  1. Size before assembly: about 7.8 cm at the widest, 7.3 cm long; 26 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Press the piece flat to about 5.5 cm thick (oval cross-section).<!-- press the piece flat by 30 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 12 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 4.8 cm at the widest, 3.5 cm long; 15 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Press the piece flat to about 3.7 cm thick (oval cross-section).<!-- press the piece flat by 22 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.2 cm at the widest, 1.7 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: an oval about 3.2 × 2 cm at the widest, 10.8 cm long; 31 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs vertically, top to bottom; the starting chain is at the front of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
  2. With grey: ch 5.
  3. Change to white (pull it through on the last yarn-over of R2).
  4. Change to dark red (pull it through on the last yarn-over of R6).
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the heart): in round 19, 8 st apart (count along round 19: about 4 st each side of the centre front line).
  • Satin stitch (on the heart): in dark brown thread, a oval about 5 mm wide and 3 mm tall, horizontal stitches; centred in round 17, on the centre front line.
  • Satin stitch (on the right heart lobe): in light pink thread, a oval about 8 mm wide and 3.6 mm tall, horizontal stitches, turned 40° anticlockwise (looking at that surface); centred in round 8, 3.5 st from the centre front line, toward the toy's left.
  • Embroidery in dark brown thread (on the heart) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 22 and 23, 5 st from the centre front line, toward the toy's right ) → (in round 22, 4 st from the centre front line, toward the toy's right) → (between rounds 21 and 22, 3 st from the centre front line, toward the toy's right ).

Abkürzungen

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung