amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Highland Cow Santa Ornament Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 68 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
2/3
Zeit
~2 Std.
Größe
7.6 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet highland cow ornament pattern: a Highland Cow Santa Ornament amigurumi, about 8 cm tall in fingering yarn with a 2 mm hook. It is a ginger highland cow with a pink muzzle, curly bangs over its big eyes, cream horns and a red Santa hat with a white pompom and a hanging loop. You need about 65 m of yarn: 20 m dark orange, 10 m red, 5 m ivory, 5 m white, 5 m red brown, 5 m light pink, 5 m light orange, 5 m dark brown and 5 m blush pink. Plan on roughly 2 hours. Hang it on the tree, or tuck it into a gift as a small present for highland cow lovers. Spin the 3D model and follow the round-by-round pattern.

Highland Cow Santa Ornament häkeln

Mittel · 8 cm hoch · etwa 2 Std. · Garn fingering · Häkelnadel 2 mm

  1. Häkle die 11 Teile in Runden: Head ball, Muzzle, Horn ×2, Ear ×2, Cheek ×2, Santa hat, Pompom, Hanging loop (insgesamt 68 Runden).
  2. Fülle und montiere in 8 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 14 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 57 Runden fertig

  1. Size before assembly: about 5.5 cm at the widest, 4.1 cm long; 23 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 2.6 × 1.7 cm at the widest, 1.1 cm long; 5 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With light pink: ch 5.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1 cm at the widest, 3.5 cm long; 13 rounds.
  2. Change to ivory (pull it through on the last yarn-over of R3).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 80° around round 5<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 5, 2 st from the centre front line, upward <!-- st 1.87 up -->). On the inner side draw rounds 4 and 6 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside. Bend the second piece as a mirror image.

  1. Size before assembly: about 1.4 cm at the widest, 1.4 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 1.2 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 4.2 mm thick); about 14 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 40 %) -->

  1. A flat circle about 1 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 3 cm at the widest, 2.7 cm long; 10 rounds.
  2. Change to white (pull it through on the last yarn-over of R7).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 85° around round 5<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's left on the finished toy (on the piece: in round 5, 6 st from the centre front line, toward the toy's left <!-- st 5.98 left -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 2 to round 8, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 6 rounds) and fasten off inside.

  1. Size before assembly: about 1.6 cm at the widest, 1.2 cm long; 6 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.3 cm at the widest, 0.8 cm long; 3 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in red (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 14 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 7 mm (on the head ball): between rounds 13 and 14, 10 st apart (count along round 13: about 4.8 st each side of the centre front line).
  • Satin stitch (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image): in dark pink thread, a oval about 2.4 mm wide and 3.2 mm tall, horizontal stitches; centred in round 3, 2.5 st from the centre top line, toward the toy's left .
  • Fringe (on the head ball): cut 15 pieces of yarn (red brown, light orange) about 46 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along in round 19, 5 st from the centre front line, toward the toy's right -> between rounds 18 and 19, 3 st from the centre front line, toward the toy's right -> between rounds 18 and 19, on the centre front line -> between rounds 18 and 19, 3 st from the centre front line, toward the toy's left -> in round 19, 5 st from the centre front line, toward the toy's left , evenly spaced. Trim to about 13 mm. Curl the strands (see the last item of this section).
  • Fringe (on the head ball): cut 14 pieces of yarn (light orange, red brown) about 46 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along in round 17, 6.5 st from the centre front line, toward the toy's right -> in round 17, 3.5 st from the centre front line, toward the toy's right -> in round 17, on the centre front line -> in round 17, 3.5 st from the centre front line, toward the toy's left -> in round 17, 6.5 st from the centre front line, toward the toy's left , evenly spaced. Trim to about 13 mm. Curl the strands (see the last item of this section).
  • Mane (on the head ball): cut 9 pieces of yarn (red brown, light orange) about 46 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along in round 21, 5 st from the centre front line, toward the toy's left -> between rounds 20 and 21, on the centre back line -> in round 21, 5 st from the centre front line, toward the toy's right , evenly spaced. Trim to about 13 mm. Curl the strands (see the last item of this section).
  • Curling the strands: Curls: before knotting, wrap the pieces tightly in a spiral around a knitting needle or a wooden skewer (3–4 mm), tape the ends, dampen (or steam with an iron held above, not touching) and let them dry completely on the needle; slide them off and they stay curly. For fluffy waves instead, untwist each strand into its plies and brush lightly. Note: instead of knotted strands the fringe can be worked as loop stitches along the rounds — an alternative that is not part of this pattern's stitch counts.

Head ball · R1–R5

MR××××××VVVVVV×V×V×

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done