Jellyfish Keychain (einfach) häkeln: Anleitung (PDF kostenlos)

R1with lilac: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7(5 sc, inc) ×6(42)
R83 sc, (inc, 6 sc) ×5, inc, 3 sc(48)
R9–1648 sc(48)
R17(BLO)48 sc(48)
R183 sc, (dec, 6 sc) ×5, dec, 3 sc(42)
R19(5 sc, dec) ×6(36)
R202 sc, (dec, 4 sc) ×5, dec, 2 sc(30)
R21(3 sc, dec) ×6(24)
R221 sc, (dec, 2 sc) ×5, dec, 1 sc(18)
R23(1 sc, dec) ×6(12)
R24dec ×6(6)
Size before assembly: about 5.1 cm at the widest, 4.6 cm long; 24 rounds.
→ Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

R1with light lilac: ch 48 and join into a ring with a sl st in the first ch (do not twist); 48 sc, one in each ch of the ring(48)
R2(1 sc, inc, 1 sc, inc, 2 sc, inc, 1 sc) ×6(66)
R366 sc(66)
R4(shells)(skip 2 st, 7 dc in one st, skip 2 st, 1 sl st) ×11(88)
Size before assembly: about 6.9 cm at the widest (lies flat); 4 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with light lilac: 4 sc in MR(4)
R2(1 sc, inc) ×2(6)
R3–116 sc(6)
Size before assembly: about 0.6 cm at the widest, 2.8 cm long; 11 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 380° around round 6. The piece rolls up into a spiral (about 1.1 turns) from round 6 to its tip: after stuffing, roll it up starting from the tip (round 1) toward the side that faces forward on the finished toy; the turns lie close, each wider than the last. From the tip to round 6 tack neighbouring turns together with 2–3 stitches of matching yarn every 3–4 rounds and hide the yarn inside.

R1with cream: 4 sc in MR(4)
R2(1 sc, inc) ×2(6)
R3–116 sc(6)
Size before assembly: about 0.6 cm at the widest, 2.8 cm long; 11 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 380° around round 6. The piece rolls up into a spiral (about 1.1 turns) from round 6 to its tip: after stuffing, roll it up starting from the tip (round 1) toward the side that faces toward the toy's left on the finished toy; the turns lie close, each wider than the last. From the tip to round 6 tack neighbouring turns together with 2–3 stitches of matching yarn every 3–4 rounds and hide the yarn inside.

R1with silver: ch 16 and join into a ring with a sl st in the first ch (do not twist); 16 sc, one in each ch of the ring(16)
R216 sc(16)
Size before assembly: about 1.5 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in silver (same rounds, no colour changes).
Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 8 mm (on the dome): between rounds 11 and 12, 7 st apart (count along round 11: about 3.5 st each side of the centre front line).
Embroidery in dark purple thread (on the dome), straight stitches through: (in round 13, 1 st from the centre front line, toward the toy's right ) → (in round 14, 0.5 st from the centre front line, toward the toy's right ) → (in round 14, on the centre front line) → (in round 14, 0.5 st from the centre front line, toward the toy's left ) → (in round 13, 1 st from the centre front line, toward the toy's left ).