amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Big Floppy Puppy Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 131 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
3/3
Zeit
~12 Std.
Größe
30.1 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

This free crochet dog pattern makes a big, squishy cream puppy with floppy brown ears and one brown patch around its eye. The amigurumi puppy sits low and round like a pillow, with its big head sunk into a wide belly, ears hanging down along its head, short plump paws with brown pads, rosy cheeks and a red collar with a gold tag. It is worked in the round in single crochet with bulky yarn and a 6 mm hook, ends up about 30 cm (12 in) tall and 33 cm (13 in) wide, and has 30 mm safety eyes and a safety nose. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see where the ears, patch and paws go.

Big Floppy Puppy häkeln

Fortgeschritten · 30 cm hoch · etwa 12 Std. · Garn bulky · Häkelnadel 6 mm

  1. Häkle die 15 Teile in Runden: Body, Head, Muzzle, Ear ×2, Eye patch, Cheek ×2, Collar, Tag, Front leg ×2, Foot ×2, Tail (insgesamt 134 Runden).
  2. Fülle und montiere in 11 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 11 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 7.5 mm wide, 1 round ≈ 6.8 mm tall (10 cm ≈ 13 sc × 15 rounds); yarn about 3.6 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 113 Runden fertig

  1. Size before assembly: about 25.1 cm at the widest, 14 cm long; 27 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 26.3 cm at the widest, 20.4 cm long; 44 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Press the piece flat to about 23.7 cm thick (oval cross-section).<!-- press the piece flat by 10 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: an oval about 9.4 × 5.6 cm at the widest, 2.9 cm long; 6 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With cream paw: ch 7.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 9.1 cm at the widest, 11.3 cm long; 18 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 20.5 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 8.6 mm deep in front, a rounded back; about 91 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) --> Bend ≈ 90° around round 16<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 8 twist 1 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 16, 1.5 st from the centre bottom line, toward the back <!-- st 1.36 back -->). If the ear sticks out, smooth it down along the head by hand.

  1. A flat oval about 9.9 × 6.9 cm; 5 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With toffee brown: ch 6.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 2.8 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 20.2 cm at the widest, 1.4 cm long; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Flat motif — circle (worked in rounds, one layer of fabric), about 4.3 × 4.3 cm; 3 rows.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. Size before assembly: about 5 cm at the widest, 5 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 7.4 cm at the widest, 5 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 3.5 cm at the widest, 4.9 cm long; 8 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 40° around round 4<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 4, on the centre top line). On the inner side draw rounds 3 and 5 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 4 st, pull to the angle and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 30 mm (on the head): in round 21, 17 st apart (count along round 21: about 8.5 st each side of the centre front line).
  • Safety nose, oval, 24×17 mm (on the muzzle): between rounds 1 and 2, on the centre top line . Colour nose black #1d1a1a.
  • Embroidery in nose black thread (on the muzzle), straight stitches through: (between rounds 1 and 2, on the centre bottom line ) → (between rounds 2 and 3, on the centre bottom line ).
  • Embroidery in nose black thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 2 and 3, on the centre bottom line ) → (in round 3, 2 st from the centre bottom line, toward the toy's left ) → (in round 3, 4 st from the centre bottom line, toward the toy's left ).
  • Satin stitch (on the muzzle): in tongue pink thread, a oval about 9 mm wide and 8 mm tall, horizontal stitches; centred in round 3, on the centre bottom line .
  • Satin stitch (on the foot) (2: one on each foot; the left one is described, the right is its mirror): in toffee brown thread, a oval about 22 mm wide and 17 mm tall, horizontal stitches; centred in round 1, on the centre top line .

Body · R1–R5

MR××××××VVVVVV×V×V×V

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done