amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Leggy Chicken in Sneakers Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 106 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
3/3
Zeit
~4 Std.
Größe
18.8 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet chicken pattern for a leggy amigurumi hen: a round egg-shaped body perched on long striped legs in tiny red sneakers. About 19 cm tall in DK yarn with a 2.5 mm hook, roughly 4 hours of work. She stares straight ahead with a perfectly blank face, as if she just walked into the wrong room. The body, comb, beak and wings are simple rounds; the legs are worked as long tubes with yellow and red stripes, and each sneaker gets a white sole and toe cap. A funny crochet gift for chicken lovers, a desk buddy, or a starting point for your own leggy toys. Spin the 3D model to see every piece, then follow the round-by-round pattern.

Leggy Chicken in Sneakers häkeln

Fortgeschritten · 19 cm hoch · etwa 4 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 14 Teile in Runden: Body, Comb center, Comb side ×2, Beak, Wing ×2, Tail feather ×3, Leg ×2, Sneaker ×2 (insgesamt 106 Runden).
  2. Fülle und montiere in 12 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 9 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 3.8 mm wide, 1 round ≈ 3.4 mm tall (10 cm ≈ 26 sc × 29 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 72 Runden fertig

  1. Size before assembly: about 9 cm at the widest, 10.9 cm long; 39 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.3 cm at the widest, 2.2 cm long; 8 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 45 %).

  1. Of these: front — 1; back — 1. Size before assembly: about 1.9 cm at the widest, 2 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 45 %).

  1. Size before assembly: about 1.4 cm at the widest, 1.8 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.6 cm at the widest, 3.1 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 1.3 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 16 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 40 %) -->

  1. Of these: mid — 1; top — 1; no. 3 — 1. Size before assembly: about 1.3 cm at the widest, 1.8 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 40 %).

  1. Size before assembly: about 2.1 cm at the widest, 6.5 cm long; 19 rounds.
  2. Change to red (pull it through on the last yarn-over of R2).
  3. Change to yellow (pull it through on the last yarn-over of R4).
  4. Change to red (pull it through on the last yarn-over of R6).
  5. Change to yellow (pull it through on the last yarn-over of R8).
  6. Change to red (pull it through on the last yarn-over of R11).
  7. Change to yellow (pull it through on the last yarn-over of R13).
  8. Change to red (pull it through on the last yarn-over of R15).
  9. Change to yellow (pull it through on the last yarn-over of R17).
  10. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Of these: no. 1 — 1; right — 1. Size before assembly: an oval about 2.4 × 1.3 cm at the widest, 3.7 cm long; 11 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With white: ch 5.
  3. Change to red (pull it through on the last yarn-over of R3).
  4. → Start stuffing (firmly) and keep adding as you decrease.
  5. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 9 mm (on the body): in round 24, 10 st apart (count along round 24: about 5.2 st each side of the centre front line).
  • Embroidery in pink thread (on the body) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 21, 4.5 st from the centre front line, toward the toy's left ) → (in round 21, 6.5 st from the centre front line, toward the toy's left ).
  • Embroidery in white thread (on the sneaker), straight stitches through: (in round 6, 1 st from the centre top line, toward the toy's right ) → (in round 8, 0.5 st from the centre top line, toward the toy's left ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done