amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Fantasie

Tiny Nessie with a Rubber Duck Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 107 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorFantasie

Schwierigkeit
3/3
Zeit
~3 Std.
Größe
17 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet loch ness monster pattern: a Tiny Nessie with a Rubber Duck amigurumi, about 17 cm tall in DK yarn with a 2.5 mm hook. It is a green long-necked Nessie with a pale belly, three dark green back humps, pink cheeks and a small yellow rubber duck sitting on her head. You need about 100 m of yarn: 55 m green, 20 m dark green, 10 m pale green, 5 m yellow, 5 m pink and 5 m orange. Plan on roughly 3 hours. She is a friendly gift for cryptid and Scotland fans, or a shelf friend with a funny hat. Turn the 3D model around and follow the round-by-round pattern.

Tiny Nessie with a Rubber Duck häkeln

Fortgeschritten · 17 cm hoch · etwa 3 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 12 Teile in Runden: Body with tail, Neck with head, Hump ×2, Small hump, Flipper ×2, Rubber duck body, Duck head, Beak, Cheek ×2 (insgesamt 107 Runden).
  2. Fülle und montiere in 10 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 11 bereit

Mehr wie dieses

Alle Amigurumi-Anleitungen: Ente →Alles in fantasie →
  • Vorschau von Green Dino with a Red Saddle
    Generator
    HäkelnRemix

    Green Dino with a Red Saddle

    vom Anleitungsgenerator

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 74 Runden fertig

  27. Size before assembly: about 6.8 cm at the widest, 10.9 cm long; 34 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  28. → Start stuffing (firmly) and keep adding as you decrease.
  29. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  15. Size before assembly: about 6.7 cm at the widest, 10.2 cm long; 31 rounds.
  16. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 35° around round 10<!-- the bend spreads over 6 rounds -->. After stuffing, bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 10, on the centre front line). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 8 to round 13, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 5 rounds) and fasten off inside.

  9. Size before assembly: about 3.1 cm at the widest, 2.2 cm long; 9 rounds.
  10. → Start stuffing (firmly) and keep adding as you decrease.
  11. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  7. Size before assembly: about 2.3 cm at the widest, 1.9 cm long; 7 rounds.
  8. → Start stuffing (firmly) and keep adding as you decrease.
  9. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  6. Size before assembly: about 1.3 cm at the widest, 2.3 cm long; 7 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.<!-- flattened 50 % -->

  7. Size before assembly: about 2.4 cm at the widest, 2.2 cm long; 8 rounds.
  8. → Start stuffing (moderately) and keep adding as you decrease.
  9. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  5. Size before assembly: about 1.6 cm at the widest, 1.9 cm long; 6 rounds.
  6. → Start stuffing (moderately) and keep adding as you decrease.
  7. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  4. Size before assembly: about 0.8 cm at the widest, 0.9 cm long; 3 rounds.
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 60 % -->

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the neck with head): in round 9, 10 st apart (count along round 9: about 5.1 st each side of the centre front line).
  • Embroidery in dark red thread (on the neck with head) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 14, 4.5 st from the centre front line, toward the toy's left ) → (in round 15, 3 st from the centre front line, toward the toy's left ) → (in round 15, 1.5 st from the centre front line, toward the toy's left ) → (in round 14, on the centre front line ).

Body with tail · R1–R5

MR×××××V×V××V××V××V×

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Big Grey Forest Spirit
    Generator
    HäkelnRemix

    Big Grey Forest Spirit

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Black Baby Dragon
    Generator
    HäkelnRemix

    Black Baby Dragon

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Blue Alien with Big Ears
    Generator
    HäkelnRemix

    Blue Alien with Big Ears

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Little Spider Hero
    Generator
    HäkelnRemix

    Little Spider Hero

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Sleepy Big Belly Bear
    Generator
    HäkelnRemix

    Sleepy Big Belly Bear

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Little Green Ogre
    Generator
    HäkelnRemix

    Little Green Ogre

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Burlap Sack Doll
    Generator
    HäkelnRemix

    Burlap Sack Doll

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Happy Snowman with Twig Arms
    Generator
    HäkelnRemix

    Happy Snowman with Twig Arms

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Yellow Capsule Helper
    Generator
    HäkelnRemix

    Yellow Capsule Helper

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Ghost in a Mouse Costume
    Generator
    HäkelnRemix

    Ghost in a Mouse Costume

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Pirate Boy in a Straw Hat
    Generator
    HäkelnRemix

    Pirate Boy in a Straw Hat

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
    • ××V×××××V××××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done