amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Mini Bunny Keychain Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 46 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
1/3
Zeit
~2 Std.
Größe
6 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

A free crochet bunny keychain pattern for a tiny white amigurumi bunny holding a mini carrot. Long ears with pink insides, rosy cheeks, a round pompom tail and a green-topped orange carrot make this little bunny plushie easy to clip onto a bag. It is worked in the round in single crochet with fingering yarn and a 2 mm hook, stands about 6 cm (2.4 in) tall, and the ears, feet, tail and carrot are made separately and sewn on, with safety eyes and a chain loop on top for a key ring. Follow it row by row with stitch counts and turn the interactive 3D model to check every piece.

Mini Bunny Keychain häkeln

Für Anfänger · 6 cm hoch · etwa 2 Std. · Garn fingering · Häkelnadel 2 mm

  1. Häkle die 12 Teile in Runden: Head-body, Ear ×2, Foot ×2, Pompom tail, Carrot, Carrot top ×3, Cheek ×2 (insgesamt 47 Runden).
  2. Fülle und montiere in 9 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 12 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 39 Runden fertig

  1. Size before assembly: about 4.9 cm at the widest, 3.7 cm long; 21 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.4 cm at the widest, 2.6 cm long; 10 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Change to snow white (pull it through on the last yarn-over of R8).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 0.9 mm deep in front, a rounded back; about 14 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 30 %) -->

  1. Size before assembly: about 0.9 cm at the widest, 0.6 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 0.9 cm at the widest, 1.1 cm long; 4 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1 cm at the widest, 1.6 cm long; 6 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Of these: top, mid — 1; top, side — 2 (left and right). Flat motif — leaf (pointed leaf, worked in rounds, one layer of fabric), about 1.3 × 0.7 cm; 1 row.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. A flat circle about 1 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 7 mm (on the head-body): in round 13, 7 st apart (count along round 13: about 3.5 st each side of the centre front line).
  • Satin stitch (on the head-body): in rose pink thread, a oval about 4.2 mm wide and 3 mm tall, horizontal stitches; centred between rounds 11 and 12, on the centre front line .
  • Embroidery in dark brown thread (on the head-body), straight stitches through: (in round 11, on the centre front line ) → (between rounds 10 and 11, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 10 and 11, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 10 and 11, 1 st from the centre front line, toward the toy's right ).
  • Embroidery in dark brown thread (on the head-body), straight stitches through: (in round 11, on the centre front line ) → (between rounds 10 and 11, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 10 and 11, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 10 and 11, 1 st from the centre front line, toward the toy's left ).

Head-body · R1–R5

MR××××××VVVVVV×V×V×

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done