amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Fantasie

Mothman Keychain Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 87 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorFantasie

Schwierigkeit
3/3
Zeit
~3 Std.
Größe
8 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet mothman pattern: a Mothman Keychain amigurumi, about 8 cm tall in fingering yarn with a 2.0 mm hook. This one is a tiny dark grey moth creature with huge red eyes, feathery antennae, small wings and a cream ruff, with a loop on top for a key ring. You need about 80 m of yarn: 25 m dark grey, 10 m slate grey, 10 m cream, 10 m charcoal, 5 m ebony, 5 m mid grey, 5 m blush pink, 5 m beige and 5 m red. Plan on roughly 3 hours. Clip it to keys or a bag as a cryptid charm, or give it to a friend who loves folklore mysteries. You can spin the 3D model and follow the round-by-round pattern.

Mothman Keychain häkeln

Fortgeschritten · 8 cm hoch · etwa 3 Std. · Garn fingering · Häkelnadel 2 mm

  1. Häkle die 21 Teile in Runden: Body, Foot ×2, Lower wing ×2, Fluffy ruff, Head, Upper wing ×2, Wing eyespot ×2, Face patch, Cheek ×2, Arm ×2, Antenna stalk ×2, Feather antenna ×2, Key ring loop (insgesamt 95 Runden).
  2. Fülle und montiere in 13 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 14 bereit

Mehr wie dieses

Alles in fantasie →
  • Vorschau von Green Dino with a Red Saddle
    Generator
    HäkelnRemix

    Green Dino with a Red Saddle

    vom Anleitungsgenerator

RemixHäkeln

Maschenprobe

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 78 Runden fertig

  10. Size before assembly: about 3.1 cm at the widest, 2.9 cm long; 13 rounds.
  11. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  6. Size before assembly: about 1 cm at the widest, 1.5 cm long; 6 rounds.
  7. Change to dark grey (pull it through on the last yarn-over of R4).
  8. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  8. Size before assembly: about 1.1 cm at the widest, 1.8 cm long; 7 rounds.
  9. → Start stuffing (lightly) and keep adding as you decrease.
  10. Press the piece flat to about 3 mm thick (oval cross-section).<!-- press the piece flat by 75 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  8. Size before assembly: about 4.8 cm at the widest, 1.4 cm long; 7 rounds.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  19. Size before assembly: about 4.9 cm at the widest, 3.8 cm long; 21 rounds.
  20. → Start stuffing (firmly) and keep adding as you decrease.
  21. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  15. Size before assembly: about 1.8 cm at the widest, 4.2 cm long; 16 rounds.
  16. Change to slate grey (pull it through on the last yarn-over of R3).
  17. → Start stuffing (lightly) and keep adding as you decrease.
  18. Press the piece flat to about 3 mm thick (oval cross-section).<!-- press the piece flat by 85 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  3. A flat circle about 1.2 cm across; 2 rounds.
  4. Change to beige (pull it through on the last yarn-over of R1).
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  6. A flat oval about 3.6 × 2.7 cm; 5 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  7. With mid grey: ch 5.
  8. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Do not stuff.

  3. A flat circle about 1.1 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  5. Size before assembly: about 0.8 cm at the widest, 1.5 cm long; 6 rounds.
  6. Change to dark grey (pull it through on the last yarn-over of R2).
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  3. Size before assembly: about 0.4 cm at the widest, 1.5 cm long; 6 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 45° around round 4<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's left on the finished toy (on the piece: in round 4, 1 st from the centre front line, toward the toy's left <!-- st 0.84 left -->). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 4 and 5 together. Bend the second piece as a mirror image.

  2. Flat motif — leaf (pointed leaf, worked in rounds, one layer of fabric), about 1.9 × 0.8 cm; 1 row.
  3. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  3. Size before assembly: about 1.5 cm at the widest, 0.8 cm long; 3 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in charcoal (same rounds, no colour changes).
  4. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the face patch): between rounds 2 and 3, 7 st apart (count along round 2: about 3.3 st each side of the centre top line). Iris red #e0282f.
  • Embroidery in plum thread (on the face patch), straight stitches through: (between rounds 1 and 2, on the centre bottom line ) → (in round 2, on the centre bottom line) → (between rounds 1 and 2, on the centre bottom line ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Big Grey Forest Spirit
    Generator
    HäkelnRemix

    Big Grey Forest Spirit

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Black Baby Dragon
    Generator
    HäkelnRemix

    Black Baby Dragon

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Blue Alien with Big Ears
    Generator
    HäkelnRemix

    Blue Alien with Big Ears

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Little Spider Hero
    Generator
    HäkelnRemix

    Little Spider Hero

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Sleepy Big Belly Bear
    Generator
    HäkelnRemix

    Sleepy Big Belly Bear

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Little Green Ogre
    Generator
    HäkelnRemix

    Little Green Ogre

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Burlap Sack Doll
    Generator
    HäkelnRemix

    Burlap Sack Doll

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Happy Snowman with Twig Arms
    Generator
    HäkelnRemix

    Happy Snowman with Twig Arms

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Yellow Capsule Helper
    Generator
    HäkelnRemix

    Yellow Capsule Helper

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Ghost in a Mouse Costume
    Generator
    HäkelnRemix

    Ghost in a Mouse Costume

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Pirate Boy in a Straw Hat
    Generator
    HäkelnRemix

    Pirate Boy in a Straw Hat

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
    • ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done