amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Essen

Orange Soda Bottle Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 64 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorEssen

Schwierigkeit
1/3
Zeit
~3 Std.
Größe
15.8 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

This free crochet soda bottle pattern makes a happy orange soda amigurumi standing on two stubby legs with little arms held out for a hug. The bottle is worked in one piece from the flat base up through rounded shoulders and a narrow neck to a bright green cap with a crisp back-loop edge. A white label with an orange-and-leaf applique, big 15 mm safety eyes with lashes, pink cheeks and white felt shine marks finish the look. Made in single crochet with DK yarn and a 2.5 mm hook, it is about 16 cm (6 in) tall. Follow the rows with stitch counts and turn the 3D model to place every piece.

Orange Soda Bottle häkeln

Für Anfänger · 16 cm hoch · etwa 3 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 9 Teile in Runden: Bottle, Leg ×2, Arm ×2, Orange, Leaf, Cheek ×2 (insgesamt 65 Runden).
  2. Fülle und montiere in 7 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 9 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 34 Runden fertig

  1. Size before assembly: about 6.8 cm at the widest, 14.1 cm long; 43 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Change to green (pull it through on the last yarn-over of R35).
  4. Press the piece flat to about 6 cm thick (oval cross-section).<!-- press the piece flat by 12 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.4 cm at the widest, 2.5 cm long; 8 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.3 cm at the widest, 3.1 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 2.3 cm across; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Flat motif — leaf (pointed leaf, worked in rounds, one layer of fabric), about 1.7 × 0.9 cm; 1 row.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  1. A flat circle about 0.8 cm across; 1 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 15 mm (on the bottle): in round 23, 7 st apart (count along round 23: about 3.6 st each side of the centre front line).
  • Embroidery in black thread (on the bottle), straight stitches through: (between rounds 22 and 23, 1 st from the centre front line, toward the toy's right ) → (in round 22, 0.5 st from the centre front line, toward the toy's right ) → (in round 22, on the centre front line ) → (in round 22, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 22 and 23, 1 st from the centre front line, toward the toy's left ).
  • Embroidery in black thread (on the bottle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 24 and 25, 4.5 st from the centre front line, toward the toy's left ) → (in round 25, 5 st from the centre front line, toward the toy's left ).
  • Embroidery in black thread (on the bottle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 23 and 24, 5 st from the centre front line, toward the toy's left ) → (in round 24, 5.5 st from the centre front line, toward the toy's left ).
  • Felt (white), 2 ovals 8×2.4 mm, tilted 60° anticlockwise (on the bottle) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: in round 30, 5.5 st from the centre front line, toward the toy's left .
  • Felt (white), 2 ovals 8×2.4 mm, tilted 60° anticlockwise (on the bottle) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: between rounds 30 and 31, 6 st from the centre front line, toward the toy's left .
  • Felt (white), 2 ovals 8×2.4 mm, tilted 39° anticlockwise (on the bottle) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: in round 11, 8.5 st from the centre front line, toward the toy's left .
  • Felt (white), 2 ovals 8×2.4 mm, tilted 120° anticlockwise (on the bottle) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: in round 30, 5.5 st from the centre back line, toward the toy's left .
  • Felt (white), 2 ovals 8×2.4 mm, tilted 120° anticlockwise (on the bottle) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: between rounds 30 and 31, 4.5 st from the centre back line, toward the toy's left .
  • Felt (white), 2 ovals 8×2.4 mm, tilted 141° anticlockwise (on the bottle) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: in round 11, 15.5 st from the centre front line, toward the toy's left .

Bottle · R1–R5

MR××××××VVVVVV×V×V×

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done