amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Pflanzen

Melting Snowman Ornament Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 97 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorPflanzen

Schwierigkeit
3/3
Zeit
~3 Std.
Größe
9.2 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet snowman pattern: a Melting Snowman Ornament amigurumi, about 9 cm tall in fingering yarn with a 2.0 mm hook. It is a white snowman half sunk into a light blue puddle, with a red scarf, a drooping carrot nose, twig arms and a worried face, and a gold loop on top. You need about 90 m of yarn: 35 m white, 25 m light blue, 5 m red, 5 m gold, 5 m brown, 5 m orange, 5 m pink and 5 m black. Plan on roughly 3 hours. This little snowman works as a tree ornament or a cheerful desk buddy for anyone who loves winter crafts. You can spin the 3D model and follow the round-by-round pattern.

Melting Snowman Ornament häkeln

Fortgeschritten · 9 cm hoch · etwa 3 Std. · Garn fingering · Häkelnadel 2 mm

  1. Häkle die 13 Teile in Runden: Puddle, Lower snowball, Head (upper snowball), Carrot nose, Scarf, Coal button ×3, Cheek ×2, Twig arm ×2, Hanging loop (insgesamt 97 Runden).
  2. Fülle und montiere in 12 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 13 bereit

Mehr wie dieses

Alle Amigurumi-Anleitungen: Schneemann →Alles in pflanzen →
  • Vorschau von Baby Tree Creature in a Pot
    Generator
    HäkelnRemix

    Baby Tree Creature in a Pot

    vom Anleitungsgenerator

RemixHäkeln

Maschenprobe

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 80 Runden fertig

  1. Size before assembly: about 6.6 cm at the widest, 4 cm long; 27 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Press the piece flat to about 1.3 cm thick (oval cross-section).<!-- press the piece flat by 80 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 5.3 cm at the widest, 3.7 cm long; 18 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly, then press the piece slightly flat (oval cross-section; flattened 20 %).

  1. Size before assembly: about 5.7 cm at the widest, 5 cm long; 26 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1 cm at the widest, 1.7 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 3.7 cm at the widest, 1.4 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 0.6 cm across; 1 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 1.1 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 0.5 cm at the widest, 2.6 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1.9 cm at the widest, 0.8 cm long; 3 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in gold (same rounds, no colour changes).
  2. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 20 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 8 mm (on the head (upper snowball)): between rounds 11 and 12, 8 st apart (count along round 11: about 3.8 st each side of the centre front line).
  • Embroidery in black thread (on the head (upper snowball)), straight stitches through: (between rounds 7 and 8, 1.5 st from the centre front line, toward the toy's left ) → (in round 8, 2.5 st from the centre front line, toward the toy's left ) → (in round 9, 3.5 st from the centre front line, toward the toy's left ) → (between rounds 9 and 10, 5 st from the centre front line, toward the toy's left ).
  • Embroidery in black thread (on the head (upper snowball)), straight stitches through: (between rounds 7 and 8, 1.5 st from the centre front line, toward the toy's right ) → (in round 8, 2.5 st from the centre front line, toward the toy's right ) → (in round 9, 3.5 st from the centre front line, toward the toy's right ) → (between rounds 9 and 10, 5 st from the centre front line, toward the toy's right ).
  • Embroidery in black thread (on the head (upper snowball)), straight stitches through: (between rounds 16 and 17, 2 st from the centre front line, toward the toy's right ) → (between rounds 15 and 16, 1 st from the centre front line, toward the toy's right ) → (between rounds 16 and 17, on the centre front line ) → (between rounds 15 and 16, 1 st from the centre front line, toward the toy's left ) → (between rounds 16 and 17, 2 st from the centre front line, toward the toy's left ).

Puddle · R1–R5

MR××××××VVVVVV×V×V×

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Mushroom Keychain
    Generator
    HäkelnRemix

    Mushroom Keychain

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Cactus Keychain
    Generator
    HäkelnRemix

    Cactus Keychain

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Tulip in a Heart Pot with Bee
    Generator
    HäkelnRemix

    Tulip in a Heart Pot with Bee

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Shy Rose in a Mustard Pot
    Generator
    HäkelnRemix

    Shy Rose in a Mustard Pot

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Mushroom Couple Cap to Cap
    Generator
    HäkelnRemix

    Mushroom Couple Cap to Cap

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Succulent Trio in a Long Pot
    Generator
    HäkelnRemix

    Succulent Trio in a Long Pot

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Mushroom Family of Three
    Generator
    HäkelnRemix

    Mushroom Family of Three

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Monstera in a Pot with a Cat
    Generator
    HäkelnRemix

    Monstera in a Pot with a Cat

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    2/5
    Nachgehäkelt
    0
  • Vorschau von Tiny Desk Cactus with a Bee
    Generator
    HäkelnRemix

    Tiny Desk Cactus with a Bee

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Christmas Wreath with a Face
    Generator
    HäkelnRemix

    Christmas Wreath with a Face

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Smiling Pinecone Ornament
    Generator
    HäkelnRemix

    Smiling Pinecone Ornament

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done