amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Penguin on a Tiny Iceberg Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 62 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
2/3
Zeit
~3 Std.
Größe
8.2 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet penguin pattern: a Penguin on a Tiny Iceberg amigurumi, about 8 cm tall in DK yarn with a 2.5 mm hook. It is a small penguin with a worried face, rosy cheeks and a coral fish in its flipper, standing on a round white iceberg with light blue ice crags. You need about 85 m of yarn: 25 m white, 25 m black, 20 m light blue, 5 m coral, 5 m orange and 5 m pink. Plan on roughly 3 hours. Give it to someone who likes a dramatic little penguin, or keep it as a funny desk companion. Spin the 3D model and follow the round-by-round pattern, fish and ice included.

Penguin on a Tiny Iceberg häkeln

Mittel · 8 cm hoch · etwa 3 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 14 Teile in Runden: Iceberg, Ice crag ×3, Penguin, Beak, Flipper ×2, Foot ×2, Cheek ×2, Fish, Fish tail (insgesamt 80 Runden).
  2. Fülle und montiere in 12 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 11 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 68 Runden fertig

  1. Size before assembly: about 7.4 cm at the widest, 2.3 cm long; 18 rounds.
  2. Change to white (pull it through on the last yarn-over of R6).
  3. → Start stuffing (firmly) and keep adding as you decrease.
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.1 cm at the widest, 3.1 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 6.7 cm at the widest, 6.2 cm long; 24 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. colours of round 1 in order: 1 sc in white, 3 sc in black, 2 sc in white
  3. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.1 cm at the widest, 0.9 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 30 %).

  1. Size before assembly: about 1 cm at the widest, 2.7 cm long; 8 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 80 % -->

  1. Size before assembly: about 1.4 cm at the widest, 0.9 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.<!-- flattened 60 % -->

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.3 cm at the widest, 3.5 cm long; 10 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.3 cm at the widest, 0.8 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 90 % -->

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the penguin): in round 18, 6 st apart (count along round 18: about 3.1 st each side of the centre front line).
  • Embroidery in black thread (on the penguin) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 16 and 17, 6.5 st from the centre front line, toward the toy's left ) → (between rounds 15 and 16, 5 st from the centre front line, toward the toy's left ) → (in round 14, 3 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the fish) (2, symmetric: the toy's left side is described, the right is its mirror image): in black thread, a oval about 3 mm wide and 3 mm tall, horizontal stitches; centred in round 4, 1.5 st from the centre front line, toward the toy's left .
  • Embroidery in black thread (on the penguin), straight stitches through: (in round 20, 1 st from the centre front line, toward the toy's right ) → (between rounds 19 and 20, 0.5 st from the centre front line, toward the toy's right ) → (in round 20, on the centre front line ) → (between rounds 19 and 20, 0.5 st from the centre front line, toward the toy's left ) → (in round 20, 1 st from the centre front line, toward the toy's left ).

Abkürzungen

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung