amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Meerestiere

Baby Seal Blob Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 42 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorMeerestiere

Schwierigkeit
1/3
Zeit
~2 Std.
Größe
5.5 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet seal pattern: a Baby Seal Blob amigurumi, about 6 cm tall in DK yarn with a 2.5 mm hook. A plump white pup lies flat with tiny flippers, big glossy black eyes, pink cheeks and stitched whiskers. You need about 50 m of yarn: 35 m white, 10 m light grey and 5 m pink. Plan on roughly 2 hours. This soft little seal is a sweet desk buddy or a gift for ocean and seal lovers. Spin the 3D model and follow the round-by-round pattern.

Baby Seal Blob häkeln

Für Anfänger · 6 cm hoch · etwa 2 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 7 Teile in Runden: Body, Flipper ×2, Tail flipper ×2, Cheek ×2 (insgesamt 42 Runden).
  2. Fülle und montiere in 4 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 8 bereit

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

RemixHäkeln

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 34 Runden fertig

  1. Size before assembly: about 8.4 cm at the widest, 8.8 cm long; 31 rounds.
  2. → Insert the safety eyes and the safety nose now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Press the piece flat to about 5.2 cm thick (oval cross-section).<!-- press the piece flat by 38 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.2 cm at the widest, 1.7 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 3 mm thick.<!-- flattened 75 % -->

  1. Size before assembly: about 1.5 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 3 mm thick.<!-- flattened 80 % -->

  1. A flat circle about 1 cm across; 1 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 13 mm (on the body): in round 28, 6 st apart (count along round 28: about 3.1 st each side of the centre top line).
  • Safety nose, oval, 9×7 mm (on the body): in round 31, on the centre bottom line.
  • Embroidery in black thread (on the body), straight stitches through: (in round 31, on the centre bottom line) → (between rounds 30 and 31, on the centre bottom line ).
  • Embroidery in black thread (on the body) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 30 and 31, on the centre bottom line ) → (in round 30, 0.5 st from the centre bottom line, toward the toy's left ) → (in round 30, 1 st from the centre bottom line, toward the toy's left ).
  • Satin stitch (on the body) (2, symmetric: the toy's left side is described, the right is its mirror image): in grey thread, a oval about 2 mm wide and 2 mm tall, horizontal stitches; centred in round 30, 1.5 st from the centre bottom line, toward the toy's left .
  • Satin stitch (on the body) (2, symmetric: the toy's left side is described, the right is its mirror image): in grey thread, a oval about 2 mm wide and 2 mm tall, horizontal stitches; centred between rounds 29 and 30, 1.5 st from the centre bottom line, toward the toy's left .
  • Embroidery in grey thread (on the body) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 30, 1.5 st from the centre bottom line, toward the toy's left ) → (in round 28, 7.5 st from the centre top line, toward the toy's left ).
  • Embroidery in grey thread (on the body) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 29 and 30, 1.5 st from the centre bottom line, toward the toy's left ) → (in round 27, 4.5 st from the centre bottom line, toward the toy's left ).

Body · R1–R5

MR×××××××V×V×V××V××

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    V××V××V×××V×××V×××××V××××V××××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done