amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Meerestiere

Shark Cat Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 97 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorMeerestiere

Schwierigkeit
3/3
Zeit
~3 Std.
Größe
11.1 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet shark pattern: a Shark Cat amigurumi, about 11 cm tall in DK yarn with a 2.5 mm hook. An orange cat face peeks out of a grey shark costume with a red mouth lined with white teeth, cat ears and a shark fin on top and a white belly. You need about 100 m of yarn: 55 m grey, 15 m red, 15 m orange, 5 m white, 5 m cream and 5 m pink. Plan on roughly 3 hours. A fun gift for cat lovers who also like sharks, or a quirky shelf friend. You can spin the 3D model and work through the round-by-round pattern.

Shark Cat häkeln

Fortgeschritten · 11 cm hoch · etwa 3 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 14 Teile in Runden: Costume body, Head (shark hood), Shark mouth, Cat face, Dorsal fin, Sleeve ×2, Paw, Tail fin, Ear ×2, Muzzle, Cheek ×2 (insgesamt 97 Runden).
  2. Fülle und montiere in 11 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 11 bereit

Mehr wie dieses

Alle Amigurumi-Anleitungen: Katze →Alle Amigurumi-Anleitungen: Hai →Alles in meerestiere →
  • Vorschau von Tiny Blue Turtle
    Generator
    HäkelnRemix

    Tiny Blue Turtle

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 82 Runden fertig

  15. Size before assembly: about 6.6 cm at the widest, 4.1 cm long; 15 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  16. Change to grey (pull it through on the last yarn-over of R14).
  17. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  21. Size before assembly: about 8.2 cm at the widest, 6.1 cm long; 26 rounds.
  22. → Start stuffing (firmly) and keep adding as you decrease.
  23. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  11. A flat oval about 10.2 × 7.4 cm; 10 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns.
  12. With red: ch 9.
  13. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  9. A flat oval about 8.7 × 5.9 cm; 8 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns.
  10. With orange: ch 9.
  11. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Do not stuff.

  9. Size before assembly: about 2.1 cm at the widest, 3 cm long; 9 rounds.
  10. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.<!-- flattened 70 % -->

  6. Size before assembly: about 1.6 cm at the widest, 3.4 cm long; 10 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  5. Size before assembly: about 1 cm at the widest, 1.6 cm long; 5 rounds.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 3 mm thick.<!-- flattened 70 % -->

  6. Size before assembly: about 1.3 cm at the widest, 1.6 cm long; 5 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 4 mm thick.<!-- flattened 70 % -->

  5. Size before assembly: about 1.3 cm at the widest, 1.6 cm long; 5 rounds.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 1 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 13 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 35 %) -->

  4. A flat oval about 2.6 × 2.2 cm; 3 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  5. With cream: ch 3.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  2. A flat circle about 0.6 cm across; 1 rounds.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the cat face): in round 3, 15 st apart (count along round 3: about 7.6 st each side of the centre top line).
  • Satin stitch (on the muzzle): in pink thread, a triangle about 6 mm wide and 4.5 mm tall, horizontal stitches, turned 180° clockwise (looking at that surface); centred in round 1, on the centre top line .
  • Embroidery in dark brown thread (on the muzzle), straight stitches through: (in round 2, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 0.5 st from the centre bottom line, toward the toy's left ) → (in round 2, on the centre bottom line) → (between rounds 2 and 3, 0.5 st from the centre bottom line, toward the toy's right ) → (in round 2, 1 st from the centre bottom line, toward the toy's right ).
  • Satin stitch (on the shark mouth): in white thread in several layers so it stands out, a triangle about 6 mm wide and 6.5 mm tall, horizontal stitches; centred in round 8, 11.5 st from the centre top line, toward the toy's right .
  • Satin stitch (on the shark mouth): in white thread in several layers so it stands out, a triangle about 6 mm wide and 6.5 mm tall, horizontal stitches; centred in round 8, 9 st from the centre top line, toward the toy's right .
  • Satin stitch (on the shark mouth): in white thread in several layers so it stands out, a triangle about 6 mm wide and 6.5 mm tall, horizontal stitches; centred in round 8, 6 st from the centre top line, toward the toy's right .
  • Satin stitch (on the shark mouth): in white thread in several layers so it stands out, a triangle about 6 mm wide and 6.5 mm tall, horizontal stitches; centred in round 8, 3 st from the centre top line, toward the toy's right .
  • Satin stitch (on the shark mouth): in white thread in several layers so it stands out, a triangle about 6 mm wide and 6.5 mm tall, horizontal stitches; centred in round 8, on the centre top line.
  • Satin stitch (on the shark mouth): in white thread in several layers so it stands out, a triangle about 6 mm wide and 6.5 mm tall, horizontal stitches; centred in round 8, 3 st from the centre top line, toward the toy's left .
  • Satin stitch (on the shark mouth): in white thread in several layers so it stands out, a triangle about 6 mm wide and 6.5 mm tall, horizontal stitches; centred in round 8, 6 st from the centre top line, toward the toy's left .
  • Satin stitch (on the shark mouth): in white thread in several layers so it stands out, a triangle about 6 mm wide and 6.5 mm tall, horizontal stitches; centred in round 8, 9 st from the centre top line, toward the toy's left .

Abkürzungen

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    vom Anleitungsgenerator
    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Pink Starfish in Green Shorts
    Generator
    HäkelnRemix

    Pink Starfish in Green Shorts

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von No-Sew Mini Whale
    Generator
    HäkelnRemix

    No-Sew Mini Whale

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von No-Sew Narwhal
    Generator
    HäkelnRemix

    No-Sew Narwhal

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Squid Keychain
    Generator
    HäkelnRemix

    Squid Keychain

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Worry Octopus
    Generator
    HäkelnRemix

    Worry Octopus

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Seal Doing a Belly Flop
    Generator
    HäkelnRemix

    Seal Doing a Belly Flop

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Kraken in a Teacup
    Generator
    HäkelnRemix

    Kraken in a Teacup

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Axolotl Leaning on a Heart
    Generator
    HäkelnRemix

    Axolotl Leaning on a Heart

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Gamer Axolotl with Headphones
    Generator
    HäkelnRemix

    Gamer Axolotl with Headphones

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Seahorse Holding a Pearl
    Generator
    HäkelnRemix

    Seahorse Holding a Pearl

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Offended Puffed-Up Pufferfish
    Generator
    HäkelnRemix

    Offended Puffed-Up Pufferfish

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Satin stitch (on the shark mouth): in white thread in several layers so it stands out, a triangle about 6 mm wide and 6.5 mm tall, horizontal stitches; centred in round 8, 11.5 st from the centre top line, toward the toy's left .