amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Meerestiere

Shark Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 62 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorMeerestiere

Schwierigkeit
1/3
Zeit
~2 Std.
Größe
9.5 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

A free crochet shark pattern for a chubby blue-gray amigurumi shark that lies on its tummy and grins with three tiny teeth. This shark plushie has a white belly and chin, a tall dorsal fin, a two-lobed tail, little side fins and stitched gill slits, plus pink cheeks to keep it friendly. The body is one piece worked in the round in single crochet with DK yarn and a 2.5 mm hook, the lightly stuffed fins are flattened and sewn on, and with 12 mm safety eyes it is about 9.5 cm (3.7 in) tall and 10 cm (4 in) long. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to check every fin.

Shark häkeln

Für Anfänger · 10 cm hoch · etwa 2 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 8 Teile in Runden: Body, Dorsal fin, Upper tail lobe, Lower tail lobe, Side fin ×2, Cheek ×2 (insgesamt 62 Runden).
  2. Fülle und montiere in 6 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 8 bereit

Mehr wie dieses

Alle Amigurumi-Anleitungen: Hai →Alles in meerestiere →
  • Vorschau von Tiny Blue Turtle
    Generator
    HäkelnRemix

    Tiny Blue Turtle

    vom Anleitungsgenerator

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 56 Runden fertig

  26. Size before assembly: about 7.6 cm at the widest, 9.4 cm long; 31 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  27. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  28. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  10. Size before assembly: about 2.4 cm at the widest, 2.9 cm long; 9 rounds.
  11. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 7 mm thick.<!-- flattened 70 % --> Bend ≈ 35° around round 4<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 4, 2.5 st from the line on the toy's left side, toward the back). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 4 and 5 together.

  9. Size before assembly: about 2.1 cm at the widest, 2.6 cm long; 8 rounds.
  10. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.<!-- flattened 70 % -->

  7. Size before assembly: about 1.6 cm at the widest, 1.9 cm long; 6 rounds.
  8. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 5 mm thick.<!-- flattened 70 % -->

  7. Size before assembly: about 1.6 cm at the widest, 1.9 cm long; 6 rounds.
  8. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.<!-- flattened 60 % -->

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the body): between rounds 27 and 28, 8 st apart (count along round 27: about 4.2 st each side of the centre top line).
  • Satin stitch (on the body): in rose thread, a oval about 22 mm wide and 8.5 mm tall, horizontal stitches; centred between rounds 29 and 30, on the centre bottom line .
  • Satin stitch (on the body): in white thread in several layers so it stands out, a triangle about 4.2 mm wide and 4 mm tall, horizontal stitches; centred between rounds 30 and 31, 0.5 st from the centre bottom line, toward the toy's left .
  • Satin stitch (on the body): in white thread in several layers so it stands out, a triangle about 4.2 mm wide and 4 mm tall, horizontal stitches; centred between rounds 30 and 31, 0.5 st from the centre bottom line, toward the toy's right .
  • Satin stitch (on the body): in white thread in several layers so it stands out, a triangle about 4.2 mm wide and 4 mm tall, horizontal stitches; centred between rounds 30 and 31, on the centre bottom line .
  • Embroidery in navy thread (on the body) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 22, 11 st from the centre top line, toward the toy's left ) → (between rounds 21 and 22, 13 st from the centre top line, toward the toy's left ).
  • Embroidery in navy thread (on the body) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 23 and 24, 9.5 st from the centre top line, toward the toy's left ) → (in round 23, 11.5 st from the centre top line, toward the toy's left ).
  • Embroidery in navy thread (on the body) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 24 and 25, 9.5 st from the centre top line, toward the toy's left ) → (in round 24, 11.5 st from the centre top line, toward the toy's left ).

Body · R1–R3

MR×××××××V×V×V××V××V

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Pink Starfish in Green Shorts
    Generator
    HäkelnRemix

    Pink Starfish in Green Shorts

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von No-Sew Mini Whale
    Generator
    HäkelnRemix

    No-Sew Mini Whale

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von No-Sew Narwhal
    Generator
    HäkelnRemix

    No-Sew Narwhal

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Squid Keychain
    Generator
    HäkelnRemix

    Squid Keychain

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Worry Octopus
    Generator
    HäkelnRemix

    Worry Octopus

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Seal Doing a Belly Flop
    Generator
    HäkelnRemix

    Seal Doing a Belly Flop

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Kraken in a Teacup
    Generator
    HäkelnRemix

    Kraken in a Teacup

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Axolotl Leaning on a Heart
    Generator
    HäkelnRemix

    Axolotl Leaning on a Heart

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Gamer Axolotl with Headphones
    Generator
    HäkelnRemix

    Gamer Axolotl with Headphones

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Seahorse Holding a Pearl
    Generator
    HäkelnRemix

    Seahorse Holding a Pearl

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Offended Puffed-Up Pufferfish
    Generator
    HäkelnRemix

    Offended Puffed-Up Pufferfish

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
    • ××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done