amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Silly Goose with a Bow Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 93 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
2/3
Zeit
~3 Std.
Größe
12.7 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

A free crochet goose pattern for a plump white goose sitting on its tummy, with a curved neck and a big pink bow. This silly amigurumi goose has an orange beak and webbed feet, small shiny eyes with rosy cheeks, folded wings, a perky little tail and a ribbon tied around its neck. It is about 13 cm (5 in) tall in DK yarn with a 2.5 mm hook, worked in the round in single crochet: the body starts at the tail, the head and neck are one piece with 10 mm safety eyes, and the stuffed bow loops and knot are sewn on. Follow it row by row with stitch counts and turn the interactive 3D model to see where every piece goes.

Silly Goose with a Bow häkeln

Mittel · 13 cm hoch · etwa 3 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 11 Teile in Runden: Body, Head and neck, Beak, Wing ×2, Tail, Foot ×2, Bow loop ×2, Bow knot (insgesamt 93 Runden).
  2. Fülle und montiere in 8 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 8 bereit

Mehr wie dieses

Alles in tiere →
  • Vorschau von Winnie-the-Pooh with a Honey Pot
    Generator
    HäkelnRemix

    Winnie-the-Pooh with a Honey Pot

    vom Anleitungsgenerator

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 69 Runden fertig

  1. Size before assembly: about 7.7 cm at the widest, 8.7 cm long; 30 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Press the piece flat to about 6.8 cm thick (oval cross-section).<!-- press the piece flat by 12 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 5.4 cm at the widest, 7.8 cm long; 24 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 50° around round 15<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 15, on the centre front line). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 13 to round 17, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 4 rounds) and fasten off inside.

  1. Size before assembly: about 1.5 cm at the widest, 1.9 cm long; 6 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 2.4 cm at the widest, 3.2 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 1.1 cm thick.<!-- flattened 55 % -->

  1. Size before assembly: about 1.3 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.<!-- flattened 50 % -->

  1. Size before assembly: about 1.8 cm at the widest, 2.2 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 85 % -->

  1. Size before assembly: about 2.1 cm at the widest, 2.1 cm long; 7 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Press the piece flat to about 8 mm thick (oval cross-section).<!-- press the piece flat by 60 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.1 cm at the widest, 1.5 cm long; 4 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10 mm (on the head and neck): in round 9, 9 st apart (count along round 9: about 4.4 st each side of the centre front line).
  • Blush about 9 mm, dry pastel or blush (on the head and neck, both sides): between rounds 11 and 12, 5 st from the centre front line, toward the toy's left . Colour rose.
  • Strap (on the head and neck): with pink, ch 35 (≈ 10.3 cm); for a firmer strap sl st back along it. Sew it along (in round 22, on the centre back line) → (in round 22, 6 st from the centre front line, toward the toy's right) → (in round 22, on the centre front line) → (in round 22, 6 st from the centre front line, toward the toy's left) → (in round 22, on the centre back line), catching it every 2–3 ch.

Body · R1–R5

MR×××××××V×V×V××V××

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Tigger the Bouncy Tiger
    Generator
    HäkelnRemix

    Tigger the Bouncy Tiger

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Speedy Blue Hedgehog
    Generator
    HäkelnRemix

    Speedy Blue Hedgehog

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von White Beagle with Black Ears
    Generator
    HäkelnRemix

    White Beagle with Black Ears

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Grey Tabby Loaf Cat
    Generator
    HäkelnRemix

    Grey Tabby Loaf Cat

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Confused Yellow Duck
    Generator
    HäkelnRemix

    Confused Yellow Duck

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Pudding Puppy in a Beret
    Generator
    HäkelnRemix

    Pudding Puppy in a Beret

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Electric Yellow Mouse
    Generator
    HäkelnRemix

    Electric Yellow Mouse

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Piglet in a Green Jumper
    Generator
    HäkelnRemix

    Piglet in a Green Jumper

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Peter Rabbit in a Blue Jacket
    Generator
    HäkelnRemix

    Peter Rabbit in a Blue Jacket

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Bunny in a Pink Hood
    Generator
    HäkelnRemix

    Bunny in a Pink Hood

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Simple White Bunny in a Dress
    Generator
    HäkelnRemix

    Simple White Bunny in a Dress

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • V××V××V×××V×××V×××××V××××V××××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done