amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Racing Snail in a Helmet Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 89 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
2/3
Zeit
~3 Std.
Größe
8 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

Free crochet snail pattern: a Racing Snail in a Helmet amigurumi, about 8 cm tall in DK yarn with a 2.5 mm hook. A green snail wears a white helmet with a red stripe, its eye stalks poking out, and carries a red shell with a white circle and a big number 1. You need about 90 m of yarn: 45 m green, 20 m white, 15 m red, 5 m black and 5 m pink. Plan on roughly 3 hours. A funny little gift for a racing fan, or a slow-and-steady mascot for your shelf. You can spin the 3D model and work through the pattern round by round.

Racing Snail in a Helmet häkeln

Mittel · 8 cm hoch · etwa 3 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 8 Teile in Runden: Snail body, Head, Shell, Cheek ×2, Racing helmet, Eye stalk ×2 (insgesamt 89 Runden).
  2. Fülle und montiere in 6 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 10 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 62 Runden fertig

  1. Size before assembly: about 5.8 cm at the widest, 9.8 cm long; 31 rounds.
  2. → Start stuffing (moderately) and keep adding as you decrease.
  3. Press the piece flat to about 3.5 cm thick (oval cross-section).<!-- press the piece flat by 40 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 4.8 cm at the widest, 3.5 cm long; 15 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 6.4 cm at the widest, 4.9 cm long; 21 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's line on the toy's left side (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. → Start stuffing (moderately) and keep adding as you decrease.
  3. Press the piece flat to about 3.2 cm thick (oval cross-section).<!-- press the piece flat by 50 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 5.6 cm at the widest, 1.9 cm long; 10 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.1 cm at the widest, 3.4 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eye with a printed glint 10 mm (on the eye stalk) (2: one on each eye stalk; the left one is described, the right is its mirror): between rounds 5 and 6, on the centre front line.
  • Embroidery in black thread (on the head), straight stitches through: (between rounds 9 and 10, 1.5 st from the centre front line, toward the toy's right ) → (in round 10, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 10 and 11, on the centre front line ) → (in round 10, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 9 and 10, 1.5 st from the centre front line, toward the toy's left ).
  • Strap (on the shell): with black, ch 9 (≈ 2.5 cm); for a firmer strap sl st back along it. Sew it along (in round 8, 1 st from the line on the toy's left side, toward the back ) → (in round 11, 1 st from the line on the toy's left side, toward the back ) → (between rounds 14 and 15, 1 st from the line on the toy's left side, toward the back ), catching it every 2–3 ch.
  • Strap (on the shell): with black, ch 5 (≈ 1.3 cm); for a firmer strap sl st back along it. Sew it along (in round 8, 1 st from the line on the toy's left side, toward the back ) → (in round 9, on the line on the toy's left side) → (between rounds 10 and 11, 1 st from the line on the toy's left side, toward the front ), catching it every 2–3 ch.
  • Strap (on the shell): with black, ch 9 (≈ 2.5 cm); for a firmer strap sl st back along it. Sew it along (in round 8, 1 st from the line on the toy's right side, toward the back ) → (in round 11, 1 st from the line on the toy's right side, toward the back ) → (between rounds 14 and 15, 1 st from the line on the toy's right side, toward the back ), catching it every 2–3 ch.
  • Strap (on the shell): with black, ch 5 (≈ 1.3 cm); for a firmer strap sl st back along it. Sew it along (in round 8, 1 st from the line on the toy's right side, toward the back ) → (in round 9, on the line on the toy's right side) → (between rounds 10 and 11, 1 st from the line on the toy's right side, toward the front ), catching it every 2–3 ch.

Snail body · R1–R5–6

MR××××××VVVVVV×V×V×

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    V×V×V×V×V××V××V××V××V××V×××××××××××××××××××××××××
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done