Snow Leopard Cub with Snow Cap häkeln: Anleitung (PDF kostenlos)

R1with light grey: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R5(3 sc, inc) ×6(30)
R62 sc, (inc, 4 sc) ×5, inc, 2 sc(36)
R7(5 sc, inc) ×6(42)
R83 sc, (inc, 6 sc) ×5, inc, 3 sc(48)
R948 sc(48)
R104 sc, (inc, 7 sc) ×5, inc, 3 sc(54)
R11–1654 sc(54)
R1716 sc in light grey, 19 sc in white, 19 sc in light grey(54)
R18–2015 sc in light grey, 20 sc in white, 19 sc in light grey(54)
R21[light grey] 7 sc, dec, 5 sc [white] 2 sc, dec, 7 sc, dec, 7 sc [light grey] dec, 7 sc, dec, 7 sc, dec(48)
R2213 sc in light grey, 18 sc in white, 17 sc in light grey(48)
R23[light grey] 6 sc, dec, 4 sc [white] 2 sc, dec, 6 sc, dec, 5 sc [light grey] 1 sc, dec, 6 sc, dec, 6 sc, dec(42)
R24[light grey] 3 sc, dec, 5 sc [white] dec, 5 sc, dec, 5 sc, dec [light grey] 5 sc, dec, 5 sc, dec, 2 sc(36)
R25[light grey] 4 sc, dec, 2 sc [white] 2 sc, dec, 4 sc, dec, 3 sc [light grey] 1 sc, dec, 4 sc, dec, 4 sc, dec(30)
R26[light grey] 2 sc, dec, 2 sc [white] 1 sc, dec, 3 sc, dec, 3 sc [light grey] dec, 3 sc, dec, 3 sc, dec, 1 sc(24)
R27[light grey] 2 sc, dec [white] 2 sc, dec, 2 sc, dec, 1 sc [light grey] 1 sc, dec, 2 sc, dec, 2 sc, dec(18)
R28(1 sc, dec) ×6(12)
R29dec ×6(6)
Size before assembly: about 7.7 cm at the widest, 7.8 cm long; 29 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
→ Start stuffing (firmly) and keep adding as you decrease.
Press the piece flat to about 5 cm thick (oval cross-section). Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

R1starting in the 2nd ch from hook: sc 1, 3 sc in the last ch; continue along the other side of the chain: sc 0, 2 sc in the last ch (the one you made the first sc in)(6)
R2inc ×6(12)
R31 sc, inc, 1 sc, inc, 4 sc, inc, 1 sc, inc, 1 sc(16)
R416 sc(16)
Size before assembly: an oval about 2.3 × 1.9 cm at the widest, 1.1 cm long; 4 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
With white: ch 3.
Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with light grey: 6 sc in MR(6)
R2inc ×5, 1 sc(11)
R3–511 sc(11)
R62 sc, dec, 3 sc, dec, 2 sc(9)
Size before assembly: about 2.5 cm at the widest, 1.9 cm long; 6 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a dish: rounds 1–2 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 2.1 mm at the centre) and turn rounds 3–6 to the back: they make a thick rounded rim (about 8 mm thick) and lie behind as a second layer; the piece is about 25 mm across.

R1starting in the 2nd ch from hook: sc 1, 3 sc in the last ch; continue along the other side of the chain: sc 0, 2 sc in the last ch (the one you made the first sc in)(6)
R2inc ×6(12)
R3–412 sc(12)
R5(4 sc, dec) ×2(10)
Size before assembly: an oval about 1.7 × 1.3 cm at the widest, 1.6 cm long; 5 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
With white: ch 3.
Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

R1with light pink: 6 sc in MR(6)
R2inc ×6(12)
A flat circle about 1.5 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with dark grey: 6 sc in MR(6)
R2(inc ×2, 1 sc) ×2(10)
Of these: no. 1 — 2 (left and right); no. 2 — 2 (left and right); no. 3 — 2 (left and right); no. 4 — 2 (left and right); no. 5 — 2 (left and right); side — 2 (left and right). A flat circle about 1.5 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with dark grey: 5 sc in MR(5)
R2inc ×2, 1 sc, inc, 1 sc(8)
Of these: no. 1 — 2 (left and right); no. 2 — 2 (left and right); no. 3 — 2 (left and right); mid — 2 (left and right); no. 5 — 2 (left and right); no. 6 — 2 (left and right). A flat circle about 1.4 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

R1with white: 6 sc in MR(6)
R2inc ×6(12)
R3(1 sc, inc) ×6(18)
R41 sc, (inc, 2 sc) ×5, inc, 1 sc(24)
R524 sc(24)
R61 sc, (dec, 2 sc) ×5, dec, 1 sc(18)
R7(1 sc, dec) ×6(12)
R8dec ×6(6)
Size before assembly: about 2.8 cm at the widest, 1.9 cm long; 8 rounds.
→ Start stuffing (firmly) and keep adding as you decrease.
Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

Safety eyes with a printed glint 10 mm (on the head): in round 14, 8 st apart (count along round 14: about 4.2 st each side of the centre front line). Iris pale green #b4d3a2.
Safety nose, triangle, 7×5 mm (on the muzzle): between rounds 1 and 2, on the centre top line . Colour pink #f2a7b4.
Embroidery in dark grey thread (on the muzzle), straight stitches through: (in round 1, on the centre bottom line ) → (in round 2, on the centre bottom line ).
Embroidery in dark grey thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, on the centre bottom line ) → (in round 3, 1 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 1.5 st from the centre bottom line, toward the toy's left ).