amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Tiere

Long-Legged Bunny in a Dress Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 143 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorTiere

Schwierigkeit
3/3
Zeit
~4 Std.
Größe
19.3 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

A free tilda bunny pattern for a slim cream amigurumi bunny with long ears, long legs and a sage-green dress. One ear flops over at the tip, and this bunny plushie wears a dress with a pink heart, a white ruffled collar and a scalloped hem, its legs bending softly at the knee into little pink shoes. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook and sits about 19 cm (7.5 in) tall; the dress and collar are separate pieces slipped over the body, the arms are sewn onto the dress, and the eyes are safety eyes. Follow it row by row with stitch counts and turn the interactive 3D model to check every piece.

Long-Legged Bunny in a Dress häkeln

Fortgeschritten · 19 cm hoch · etwa 4 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 14 Teile in Runden: Body, Dress, Collar, Head, Ear, Bent ear, Arm ×2, Leg ×2, Pompom tail, Cheek ×2, Heart (insgesamt 161 Runden).
  2. Fülle und montiere in 11 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 11 bereit

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 92 Runden fertig

  1. Size before assembly: about 5 cm at the widest, 9.3 cm long; 27 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 7.3 cm at the widest, 4.5 cm long; 14 rounds.
  2. Change to snow white (pull it through on the last yarn-over of R12).
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 5.2 cm at the widest, 0.7 cm long; 3 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 6.4 cm at the widest, 4.6 cm long; 20 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.6 cm at the widest, 7 cm long; 20 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 1.7 mm deep in front, a rounded back; about 26 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 30 %) -->

  1. Size before assembly: about 2.6 cm at the widest, 7 cm long; 20 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 1.7 mm deep in front, a rounded back; about 26 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 30 %) --> Bend ≈ 55° around round 13<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's right on the finished toy (on the piece: in round 13, 3.5 st from the centre front line, toward the toy's right <!-- st 3.51 right -->). On the inner side draw rounds 12 and 15 together (3 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 4 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 1.3 cm at the widest, 7.9 cm long; 22 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 60° around round 9<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 9, on the centre front line <!-- st 0.23 right -->). On the inner side draw rounds 8 and 10 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside. Bend the second piece as a mirror image.

  1. Size before assembly: an oval about 2.4 × 1.6 cm at the widest, 9.5 cm long; 27 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs vertically, top to bottom; the starting chain is at the front of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
  2. With dusty pink: ch 4.
  3. Change to snow white (pull it through on the last yarn-over of R5).
  4. Change to cream (pull it through on the last yarn-over of R7).
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 60° around round 14<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces down on the finished toy (on the piece: in round 14, on the centre bottom line <!-- st 0.08 right -->). On the inner side draw rounds 13 and 15 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 3 st, pull to the angle and hide the end inside. Bend the second piece as a mirror image.

  1. Size before assembly: about 1.6 cm at the widest, 1.6 cm long; 5 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Flat motif — heart (worked in rounds, one layer of fabric), about 2.1 × 2 cm; 1 row.
  2. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 8 mm (on the head): between rounds 11 and 12, 7 st apart (count along round 11: about 3.5 st each side of the centre front line).
  • Satin stitch (on the head): in rose pink thread, a triangle about 5.5 mm wide and 3.8 mm tall, horizontal stitches; centred between rounds 13 and 14, on the centre front line .
  • Embroidery in dark brown thread (on the head), straight stitches through: (in round 14, on the centre front line) → (between rounds 14 and 15, on the centre front line ).
  • Embroidery in dark brown thread (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 14 and 15, on the centre front line ) → (in round 15, 0.5 st from the centre front line, toward the toy's left ) → (in round 15, 1 st from the centre front line, toward the toy's left ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done