amigurumi
  • Katalog
  • Werkstatt
Erstellen
amigurumi
  • Katalog
  • Anleitungen nach Tier
  • Über uns
  • Hilfe
  • App für ChatGPT und Claude
  • Nutzungsbedingungen
  • Datenschutz

Anleitungen ohne Rechenfehler und ohne Verwirrung. Mit KI-gestützter geometrischer Modellierung. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Katalog / Pflanzen

Tulip Häkelanleitung

  • Mathematisch ausgeglichenPer Skript geprüft: In allen 97 Runden passen Zu- und Abnahmen zur Maschenzahl.

vom AnleitungsgeneratorPflanzen

Schwierigkeit
2/3
Zeit
~4 Std.
Größe
17.3 cm
Schrägheit
1/5
HäkelnRemix erstellen
Kostenloses PDF zum Drucken herunterladen

A4-PDF: Material, jede Runde mit Kästchen, Montage und Gesicht

This free crochet tulip pattern makes a winking pink tulip growing in a little light blue pot. The amigurumi tulip has a soft pink flower cup wrapped in three deeper rose petals whose tips form the classic tulip crown, a playful wink, rosy cheeks, a green stem and two long pointed leaves. Every piece is worked in the round in single crochet with DK yarn and a 2.5 mm hook; the petals and leaves are lightly stuffed and pressed flat, there is one 12 mm safety eye, and the plant stands about 17 cm (7 in) tall. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see where each petal goes, a sweet spring gift.

Tulip häkeln

Mittel · 17 cm hoch · etwa 4 Std. · Garn DK · Häkelnadel 2.5 mm

  1. Häkle die 10 Teile in Runden: Pot, Stem, Flower cup, Petal ×3, Leaf ×2, Cheek ×2 (insgesamt 97 Runden).
  2. Fülle und montiere in 7 Schritten; jeder leuchtet am 3D-Modell dort auf, wo das Teil hingehört.
  3. Gestalte das Gesicht: Sicherheitsaugen nach Runde und Masche, oder gestickt für Kinder unter 3 Jahren.

Jede Runde mit Maschenzahl steht unten im Reiter Anleitung und im kostenlosen PDF zum Drucken.

Das brauchst du

Hak alles ab, was du bereitgelegt hast.

0 von 12 bereit

Mehr wie dieses

Alles in pflanzen →
  • Vorschau von Baby Tree Creature in a Pot
    Generator
    HäkelnRemix

    Baby Tree Creature in a Pot

    vom Anleitungsgenerator

RemixHäkeln

Maschenprobe

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

So wird gehäkelt

In fortlaufenden Spiralrunden. Runden nicht schließen. Den Markierer jede Runde hochsetzen.

Teile

Sprache der AnleitungenrudefrKostenloses PDF zum Drucken herunterladenPDF
0 von 58 Runden fertig

  1. Size before assembly: about 5.9 cm at the widest, 6.1 cm long; 23 rounds.
  2. Change to white (pull it through on the last yarn-over of R15).
  3. Change to brown (pull it through on the last yarn-over of R18).
  4. → Start stuffing (firmly) and keep adding as you decrease.
  5. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.1 cm at the widest, 4.5 cm long; 12 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 5.9 cm at the widest, 6.3 cm long; 23 rounds.
  2. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Of these: back — 1; side — 2 (left and right). Size before assembly: about 3.7 cm at the widest, 5.5 cm long; 17 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 9 mm thick.<!-- flattened 75 % -->

  1. Size before assembly: about 1.8 cm at the widest, 7 cm long; 20 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 3 mm thick.<!-- flattened 85 % --> Bend ≈ 28° around round 12<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's left on the finished toy (on the piece: in round 12, 3 st from the centre front line, toward the toy's left <!-- st 3.19 left -->). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 12 and 13 together. Bend the second piece as a mirror image.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eye with a printed glint 12 mm (on the flower cup): in round 11, 2.5 st from the centre front line, toward the toy's left .
  • Embroidery in dark brown thread (on the flower cup), straight stitches through: (between rounds 10 and 11, 3.5 st from the centre front line, toward the toy's right ) → (in round 11, 3 st from the centre front line, toward the toy's right ) → (between rounds 11 and 12, 2.5 st from the centre front line, toward the toy's right ) → (in round 11, 2 st from the centre front line, toward the toy's right ) → (between rounds 10 and 11, 1.5 st from the centre front line, toward the toy's right ).
  • Embroidery in dark brown thread (on the flower cup), straight stitches through: (between rounds 9 and 10, 0.5 st from the centre front line, toward the toy's right ) → (in round 9, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 8 and 9, on the centre front line ) → (in round 9, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 9 and 10, 0.5 st from the centre front line, toward the toy's left ).

Pot · R1–R5

MR××××××VVVVVV×V×V×V

Noch hat niemand seins gezeigt. Sei die erste Person.

Melde dich an, um deins zu zeigen

Noch keine Fragen

Stell die erste: Die Autorin und der KI-Assistent lesen hier mit.

    Mach dieses Amigurumi zu deinem

    Öffne es im 3D-Editor: Farben ändern, jedes Teil größer oder kleiner machen oder der KI in Worten sagen, was du willst. Deine Version bekommt ihre eigene Anleitung.

    Probier zum Beispiel:

    • Färbe es in Pastelltönen
    • Mach es runder
    • Gib ihm einen kleinen Schal
    Im 3D-Editor öffnenAus einem Foto wird eine Häkelanleitung
    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Mushroom Keychain
    Generator
    HäkelnRemix

    Mushroom Keychain

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Cactus Keychain
    Generator
    HäkelnRemix

    Cactus Keychain

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Tulip in a Heart Pot with Bee
    Generator
    HäkelnRemix

    Tulip in a Heart Pot with Bee

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Shy Rose in a Mustard Pot
    Generator
    HäkelnRemix

    Shy Rose in a Mustard Pot

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Mushroom Couple Cap to Cap
    Generator
    HäkelnRemix

    Mushroom Couple Cap to Cap

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Succulent Trio in a Long Pot
    Generator
    HäkelnRemix

    Succulent Trio in a Long Pot

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Mushroom Family of Three
    Generator
    HäkelnRemix

    Mushroom Family of Three

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Monstera in a Pot with a Cat
    Generator
    HäkelnRemix

    Monstera in a Pot with a Cat

    vom Anleitungsgenerator

    Schwierigkeit
    2/3
    Schrägheit
    2/5
    Nachgehäkelt
    0
  • Vorschau von Tiny Desk Cactus with a Bee
    Generator
    HäkelnRemix

    Tiny Desk Cactus with a Bee

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Christmas Wreath with a Face
    Generator
    HäkelnRemix

    Christmas Wreath with a Face

    vom Anleitungsgenerator

    Schwierigkeit
    1/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • Vorschau von Smiling Pinecone Ornament
    Generator
    HäkelnRemix

    Smiling Pinecone Ornament

    vom Anleitungsgenerator

    Schwierigkeit
    3/3
    Schrägheit
    1/5
    Nachgehäkelt
    0
  • ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abkürzungen

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done