amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales marinos

Baby Dolphin patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 80 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales marinos

Dificultad
2/3
Tiempo
~3 h
Tamaño
8.5 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

A free crochet dolphin pattern for a smiling baby dolphin that lies on its belly with its tail flukes spread wide. This amigurumi dolphin is soft blue-grey with a white underside, a short rounded beak, a swept-back dorsal fin, two little flippers, big shiny eyes and pink cheeks. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook and is about 15.5 cm (6 in) long and 8.5 cm (3.3 in) tall, with 12 mm safety eyes and the fins and beak sewn on. Follow it row by row with stitch counts and turn the interactive 3D model to see where every piece goes, a sweet summer gift for an ocean lover.

Cómo tejer Baby Dolphin a crochet

Intermedio · 9 cm de alto · unas 3 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 9 piezas en vueltas: Body, Beak (rostrum), Dorsal fin, Flipper ×2, Tail fluke lobe ×2, Cheek ×2 (80 vueltas en total).
  2. Rellénalo y móntalo en 6 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 9 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 69 vueltas hechas

  26. Size before assembly: about 6.7 cm at the widest, 10.2 cm long; 32 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  27. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  28. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  10. Size before assembly: an oval about 2.9 × 2.1 cm at the widest, 4.1 cm long; 12 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  11. With bluegrey: ch 4.
  12. colours of round 1 in order: 2 sc in bluegrey, 3 sc in belly, 3 sc in bluegrey
  13. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 15 %).

  11. Size before assembly: about 2.6 cm at the widest, 3.3 cm long; 10 rounds.
  12. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 8 mm thick.<!-- flattened 70 % --> Bend ≈ 40° around round 4<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 4, 2.5 st from the line on the toy's left side, toward the back). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 4 and 5 together.

  10. Size before assembly: about 2.4 cm at the widest, 2.9 cm long; 9 rounds.
  11. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 8 mm thick.<!-- flattened 65 % -->

  15. Size before assembly: about 3.7 cm at the widest, 5.1 cm long; 15 rounds.
  16. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 1.1 cm thick.<!-- flattened 70 % -->

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the Body): between rounds 26 and 27, 14 st apart (count along round 26: about 6.8 st each side of the centre top line).
  • Embroidery in navy thread (on the Beak (rostrum)) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 1 and 2, 2 st from the centre top line, toward the toy's left ) → (in round 4, 6 st from the centre top line, toward the toy's left) → (between rounds 7 and 8, 6.5 st from the centre top line, toward the toy's left ).

Body · R1–R3

MR×××××××V×V×V××V××V

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    ××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done