amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Bear in a Bee Costume patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 110 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
3/3
Tiempo
~4 h
Tamaño
15.5 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

Free crochet bear pattern: a Bear in a Bee Costume amigurumi, about 16 cm tall in DK yarn with a 2.5 mm hook. A sleepy-eyed brown teddy bear sits in a yellow and black striped bee costume with pale blue wings, a black collar, antennae and a tiny stinger. You need about 105 m of yarn: 50 m brown, 20 m black, 15 m yellow, 10 m light blue and 10 m tan. Plan on roughly 4 hours. It is a fun gift for honey and bear lovers, or a cheerful desk buddy that fits a spring shelf. Spin the 3D model and follow the round-by-round pattern.

Cómo tejer Bear in a Bee Costume a crochet

Avanzado · 16 cm de alto · unas 4 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 17 piezas en vueltas: Bee costume body, Head, Black collar, Muzzle, Ear ×2, Antenna ×2, Wing ×2, Arm with striped sleeve ×2, Leg ×2, Foot pad ×2, Stinger (110 vueltas en total).
  2. Rellénalo y móntalo en 11 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 10 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 85 vueltas hechas

  17. Size before assembly: about 7.4 cm at the widest, 5.5 cm long; 19 rounds.
  18. Change to black (pull it through on the last yarn-over of R3).
  19. Change to yellow (pull it through on the last yarn-over of R5).
  20. Change to black (pull it through on the last yarn-over of R7).
  21. Change to yellow (pull it through on the last yarn-over of R9).
  22. Change to black (pull it through on the last yarn-over of R11).
  23. Change to yellow (pull it through on the last yarn-over of R13).
  24. Change to black (pull it through on the last yarn-over of R15).
  25. Change to yellow (pull it through on the last yarn-over of R17).
  26. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  23. Size before assembly: about 8.4 cm at the widest, 6.9 cm long; 28 rounds.
  24. → Start stuffing (firmly) and keep adding as you decrease.
  25. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  3. Size before assembly: about 6.2 cm at the widest, 1.1 cm long; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  5. Size before assembly: an oval about 2.7 × 1.9 cm at the widest, 1.1 cm long; 4 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  6. With tan: ch 4.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  7. Size before assembly: about 3.3 cm at the widest, 1.5 cm long; 6 rounds.
  8. Change to brown (pull it through on the last yarn-over of R2).
  9. → This piece is not stuffed.
  10. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside. Do not stuff. Shape it into a dish: rounds 1–3 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 3.1 mm at the centre) and turn rounds 4–6 to the back: they make a thick rounded rim (about 8 mm thick) and lie behind as a second layer; the piece is about 33 mm across.<!-- (dish 50 %) -->

  6. Size before assembly: about 0.8 cm at the widest, 3.9 cm long; 11 rounds.
  7. → Start stuffing (lightly) and keep adding as you decrease.
  8. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 4 stitches of the last round, pull tight and hide the end inside.

  7. Size before assembly: about 1.7 cm at the widest, 3.7 cm long; 11 rounds.
  8. → Start stuffing (lightly) and keep adding as you decrease.
  9. Press the piece flat to about 3 mm thick (oval cross-section).<!-- press the piece flat by 80 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  10. Size before assembly: about 1.6 cm at the widest, 4.1 cm long; 11 rounds.
  11. Change to black (pull it through on the last yarn-over of R4).
  12. Change to yellow (pull it through on the last yarn-over of R5).
  13. Change to black (pull it through on the last yarn-over of R7).
  14. Change to yellow (pull it through on the last yarn-over of R9).
  15. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  9. Size before assembly: about 3.3 cm at the widest, 3.4 cm long; 11 rounds.
  10. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  4. A flat circle about 2.3 cm across; 3 rounds.
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  5. Size before assembly: about 0.8 cm at the widest, 1.3 cm long; 4 rounds.
  6. → Start stuffing (lightly) and keep adding as you decrease.
  7. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 4 stitches of the last round, pull tight and hide the end inside.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Embroidery in black thread (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 15, 2.5 st from the centre front line, toward the toy's left ) → (between rounds 15 and 16, 3 st from the centre front line, toward the toy's left ) → (between rounds 15 and 16, 4 st from the centre front line, toward the toy's left ) → (between rounds 15 and 16, 5 st from the centre front line, toward the toy's left ) → (in round 15, 5.5 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the muzzle): in black thread, a oval about 8.5 mm wide and 5.5 mm tall, horizontal stitches; centred in round 1, on the centre top line .
  • Embroidery in black thread (on the muzzle), straight stitches through: (in round 1, on the centre bottom line ) → (in round 2, on the centre bottom line ).
  • Embroidery in black thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, on the centre bottom line ) → (in round 2, 0.5 st from the centre bottom line, toward the toy's left ) → (between rounds 2 and 3, 1 st from the centre bottom line, toward the toy's left ) → (in round 2, 1.5 st from the centre bottom line, toward the toy's left ).
  • Blush about 11 mm, dry pastel or blush (on the head, both sides): between rounds 17 and 18, 6.5 st from the centre front line, toward the toy's left . Colour blush.

Bee costume body · R1–R5

MR××××××VVVVVV×V×V×

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done