amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Black Cat in a Witch Hat patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 81 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
2/3
Tiempo
~3 h
Tamaño
15.1 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

A free crochet black cat pattern for a chubby amigurumi kitten in a pointed purple witch hat, made for Halloween. This black kitty plushie has big golden eyes with a glint, a tiny pink nose, pink cheeks and pink-lined ears peeking out under the brim, while an orange band and a little star brighten the hat. Head and body are one piece worked in the round in single crochet with DK yarn and a 2.5 mm hook, the hat is crocheted from the tip down with a flat brim, and the kitty stands about 15 cm (6 in) tall with the hat on. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see where every piece goes.

Cómo tejer Black Cat in a Witch Hat a crochet

Intermedio · 15 cm de alto · unas 3 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 12 piezas en vueltas: Body, Ear ×2, Witch hat, Star, Tail, Arm ×2, Foot ×2, Cheek ×2 (83 vueltas en total).
  2. Rellénalo y móntalo en 8 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 11 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 62 vueltas hechas

  21. Size before assembly: about 7.7 cm at the widest, 8.7 cm long; 31 rounds.
  22. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  23. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  8. Size before assembly: about 3.5 cm at the widest, 2.1 cm long; 7 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 4 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 35 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 55 %) -->

  21. Size before assembly: about 5.9 cm at the widest, 6.3 cm long; 20 rounds.
  22. Change to band (pull it through on the last yarn-over of R14).
  23. Change to hat (pull it through on the last yarn-over of R16).
  24. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  3. Flat motif — star (worked in rounds, one layer of fabric), about 2.6 × 2.8 cm; 2 rows.
  4. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  4. Size before assembly: about 1.2 cm at the widest, 4.2 cm long; 12 rounds.
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 70° around round 6<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 6, 0.5 st from the centre top line, toward the toy's left <!-- st 0.74 left -->). On the inner side draw rounds 5 and 7 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  5. Size before assembly: about 1.2 cm at the widest, 1.7 cm long; 5 rounds.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  5. Size before assembly: about 1.5 cm at the widest, 1.2 cm long; 4 rounds.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 8 mm thick.<!-- flattened 50 % -->

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 16 mm (on the body): between rounds 20 and 21, 7 st apart (count along round 20: about 3.5 st each side of the centre front line). Iris iris #ffd23f.
  • Satin stitch (on the body): in nose thread, a triangle about 5 mm wide and 3.8 mm tall, horizontal stitches; centred between rounds 18 and 19, on the centre front line .
  • Embroidery in mouth thread (on the body), straight stitches through: (in round 18, on the centre front line ) → (between rounds 17 and 18, on the centre front line ) → (in round 17, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 17 and 18, 1 st from the centre front line, toward the toy's right ).
  • Embroidery in mouth thread (on the body), straight stitches through: (in round 18, on the centre front line ) → (between rounds 17 and 18, on the centre front line ) → (in round 17, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 17 and 18, 1 st from the centre front line, toward the toy's left ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done