amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Shy Bunny with a Love Letter patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 82 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
2/3
Tiempo
~3 h
Tamaño
12.2 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

Free crochet bunny pattern: a Shy Bunny with a Love Letter amigurumi, about 12 cm tall in DK yarn with a 2.5 mm hook. It is a white bunny with one folded ear peeking over a big pink envelope with a red heart seal, holding it with tiny paws and blushing. You need about 90 m of yarn: 60 m white, 10 m light pink, 5 m pink, 5 m cream, 5 m hot pink and 5 m red. Plan on roughly 3 hours. It makes a charming Valentine present or a small desk buddy for a bunny lover. Spin the 3D model and follow the round-by-round pattern.

Cómo tejer Shy Bunny with a Love Letter a crochet

Intermedio · 12 cm de alto · unas 3 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 12 piezas en vueltas: Bunny, Ear, Folded ear, Hind foot ×2, Tail, Cheek ×2, Envelope flap, Heart seal, Arm ×2 (92 vueltas en total).
  2. Rellénalo y móntalo en 10 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 11 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 66 vueltas hechas

  26. Size before assembly: about 9.3 cm at the widest, 7.7 cm long; 31 rounds.
  27. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  28. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  9. Size before assembly: about 3 cm at the widest, 5.4 cm long; 16 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  10. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 2.9 mm deep in front, a rounded back; about 30 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) -->

  9. Size before assembly: about 3 cm at the widest, 5.4 cm long; 16 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  10. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 2.9 mm deep in front, a rounded back; about 30 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) --> Bend ≈ 110° around round 6<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 6, on the centre front line). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 3 to round 9, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 6 rounds) and fasten off inside.

  5. Size before assembly: about 1.6 cm at the widest, 1.6 cm long; 5 rounds.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  7. Size before assembly: about 2.1 cm at the widest, 1.6 cm long; 6 rounds.
  8. → Start stuffing (firmly) and keep adding as you decrease.
  9. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  9. Flat motif — triangle (worked in turned rows, one layer of fabric), about 2.9 × 5.6 cm; 8 rows.
  10. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  3. Flat motif — heart (worked in rounds, one layer of fabric), about 2.8 × 2.8 cm; 2 rows.
  4. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  4. Size before assembly: about 1.1 cm at the widest, 2 cm long; 6 rounds.
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the bunny): in round 20, 9 st apart (count along round 20: about 4.3 st each side of the centre front line).

Bunny · R1–R5

MR××××××VVVVVV×V×V×V

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done