amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Christmas Cat in a Santa Hat patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 92 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
3/3
Tiempo
~4 h
Tamaño
14.1 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

A free Christmas cat crochet pattern for a sitting ginger kitten in a red Santa hat with a fluffy white brim and pom-pom. This amigurumi cat has green eyes with a glint, a pink nose, rosy cheeks, tabby stripes on its back and a cozy green ribbed scarf with a hanging end. Head, body, legs and tail are worked in the round in single crochet with DK yarn and a 2.5 mm hook, the hat is crocheted from the tip down with popcorn stitches for the brim, and the kitty is about 14 cm (5.5 in) tall. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see every piece - a sweet handmade holiday gift.

Cómo tejer Christmas Cat in a Santa Hat a crochet

Avanzado · 14 cm de alto · unas 4 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 14 piezas en vueltas: Body, Head, Ear ×2, Santa hat, Pompom, Scarf, Arm ×2, Foot ×2, Tail, Cheek ×2 (113 vueltas en total).
  2. Rellénalo y móntalo en 11 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 13 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 96 vueltas hechas

  17. Size before assembly: about 6.4 cm at the widest, 4.9 cm long; 17 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  18. Change to ginger (pull it through on the last yarn-over of R13).
  19. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  28. Size before assembly: about 8.3 cm at the widest, 7 cm long; 28 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  29. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  30. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  8. Size before assembly: about 3.2 cm at the widest, 2.1 cm long; 7 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff it lightly — a thin layer, just enough to hold the walls apart: the ear about 10.8 mm thick, with thick rounded edges. Then shape it into a spoon: push the front wall toward the back wall — a concave spoon about 3.7 mm deep in front, a rounded back; about 32 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 55 %) -->

  19. Size before assembly: about 6.4 cm at the widest, 6.6 cm long; 21 rounds.
  20. Change to snow (pull it through on the last yarn-over of R18).
  21. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Bend ≈ 115° around round 9<!-- the bend spreads over 5 rounds -->. Bend the piece so the inner side of the bend faces toward the toy's right on the finished toy (on the piece: in round 9, 3.5 st from the centre front line, toward the toy's right <!-- st 3.55 right -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 7 to round 11, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 4 rounds) and fasten off inside.

  7. Size before assembly: about 2.3 cm at the widest, 1.9 cm long; 7 rounds.
  8. → Start stuffing (firmly) and keep adding as you decrease.
  9. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  4. Size before assembly: about 6.2 cm at the widest, 1.5 cm long; 3 rounds.
  5. Change to red (pull it through on the last yarn-over of R2).
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  5. Size before assembly: about 1.3 cm at the widest, 2 cm long; 6 rounds.
  6. Change to ginger (pull it through on the last yarn-over of R2).
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  6. Size before assembly: about 2 cm at the widest, 1.9 cm long; 6 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  9. Size before assembly: about 1.2 cm at the widest, 5.7 cm long; 16 rounds.
  10. Change to stripe (pull it through on the last yarn-over of R2).
  11. Change to ginger (pull it through on the last yarn-over of R4).
  12. Change to stripe (pull it through on the last yarn-over of R7).
  13. Change to ginger (pull it through on the last yarn-over of R9).
  14. Change to stripe (pull it through on the last yarn-over of R12).
  15. Change to ginger (pull it through on the last yarn-over of R14).
  16. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 90° around round 7<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 7, 0.5 st from the centre top line, toward the toy's left <!-- st 0.26 left -->). On the inner side draw rounds 6 and 9 together (3 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 13 mm (on the head): between rounds 15 and 16, 8 st apart (count along round 15: about 4.2 st each side of the centre front line). Iris iris #7fb84a.
  • Satin stitch (on the head): in nose thread, a triangle about 6.5 mm wide and 4.8 mm tall, horizontal stitches; centred between rounds 17 and 18, on the centre front line .
  • Embroidery in mouth thread (on the head), straight stitches through: (in round 18, on the centre front line ) → (between rounds 18 and 19, on the centre front line ) → (in round 19, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 18 and 19, 1 st from the centre front line, toward the toy's right ).
  • Embroidery in mouth thread (on the head), straight stitches through: (in round 18, on the centre front line ) → (between rounds 18 and 19, on the centre front line ) → (in round 19, 0.5 st from the centre front line, toward the toy's left ) → (between rounds 18 and 19, 1 st from the centre front line, toward the toy's left ).

Body · R1–R4

MR××××××VVVVVV×V×V×V

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    ×V×V×V×V××V××V××V××V××V×
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done