amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales marinos

Clownfish patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 61 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales marinos

Dificultad
1/3
Tiempo
~2 h
Tamaño
9 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

A free crochet fish pattern for a chubby clownfish with big shiny eyes and a little round open mouth. This amigurumi clownfish is bright orange with three white bands outlined in black, and every fin, from the round dorsal fin to the fan tail, has a crisp black edge. The body is worked in the round in single crochet from the tail to the face with the stripes as color changes, the fins are small lightly stuffed pieces sewn on, and with DK yarn, a 2.5 mm hook and 14 mm safety eyes it is about 9 cm (3.5 in) tall. Follow it round by round with stitch counts and turn the interactive 3D model to see where every fin goes.

Cómo tejer Clownfish a crochet

Para principiantes · 9 cm de alto · unas 2 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 8 piezas en vueltas: Body, Tail fin, Dorsal fin, Lower fin, Side fin ×2, Cheek ×2 (61 vueltas en total).
  2. Rellénalo y móntalo en 6 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 9 reunidos

Más como este

Todo en animales marinos →
  • Vista previa de Tiny Blue Turtle
    Generador
    TejerloRemix

    Tiny Blue Turtle

    por el generador de patrones

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 55 vueltas hechas

  1. Size before assembly: about 6.8 cm at the widest, 8.9 cm long; 29 rounds.
  2. Change to ink (pull it through on the last yarn-over of R4).
  3. Change to snow (pull it through on the last yarn-over of R5).
  4. Change to ink (pull it through on the last yarn-over of R7).
  5. Change to orange (pull it through on the last yarn-over of R8).
  6. Change to ink (pull it through on the last yarn-over of R12).
  7. Change to snow (pull it through on the last yarn-over of R13).
  8. Change to ink (pull it through on the last yarn-over of R16).
  9. Change to orange (pull it through on the last yarn-over of R17).
  10. Change to ink (pull it through on the last yarn-over of R20).
  11. Change to snow (pull it through on the last yarn-over of R21).
  12. Change to ink (pull it through on the last yarn-over of R23).
  13. Change to orange (pull it through on the last yarn-over of R24).
  14. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  15. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.9 cm at the widest, 2.7 cm long; 9 rounds.
  2. Change to ink (pull it through on the last yarn-over of R7).
  3. → Start stuffing (lightly) and keep adding as you decrease.
  4. Press the piece flat to about 9 mm thick (oval cross-section).<!-- press the piece flat by 70 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 12 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.4 cm at the widest, 2.5 cm long; 8 rounds.
  2. Change to ink (pull it through on the last yarn-over of R6).
  3. → Start stuffing (lightly) and keep adding as you decrease.
  4. Press the piece flat to about 7 mm thick (oval cross-section).<!-- press the piece flat by 70 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 9 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.6 cm at the widest, 1.9 cm long; 6 rounds.
  2. Change to ink (pull it through on the last yarn-over of R4).
  3. → Start stuffing (lightly) and keep adding as you decrease.
  4. Press the piece flat to about 5 mm thick (oval cross-section).<!-- press the piece flat by 70 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2 cm at the widest, 2.2 cm long; 7 rounds.
  2. Change to ink (pull it through on the last yarn-over of R5).
  3. → Start stuffing (lightly) and keep adding as you decrease.
  4. Press the piece flat to about 6 mm thick (oval cross-section).<!-- press the piece flat by 70 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 14 mm (on the body): between rounds 26 and 27, 8 st apart (count along round 26: about 3.8 st each side of the centre top line).
  • Satin stitch (on the body): in mouth thread, a oval about 6 mm wide and 5 mm tall, horizontal stitches; centred between rounds 28 and 29, on the centre bottom line .

Body · R1–R5

MR×××××××V×V×V××V××

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Pink Starfish in Green Shorts
    Generador
    TejerloRemix

    Pink Starfish in Green Shorts

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de No-Sew Mini Whale
    Generador
    TejerloRemix

    No-Sew Mini Whale

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de No-Sew Narwhal
    Generador
    TejerloRemix

    No-Sew Narwhal

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Squid Keychain
    Generador
    TejerloRemix

    Squid Keychain

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Worry Octopus
    Generador
    TejerloRemix

    Worry Octopus

    por el generador de patrones

    Dificultad
    1/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Seal Doing a Belly Flop
    Generador
    TejerloRemix

    Seal Doing a Belly Flop

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Kraken in a Teacup
    Generador
    TejerloRemix

    Kraken in a Teacup

    por el generador de patrones

    Dificultad
    3/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Axolotl Leaning on a Heart
    Generador
    TejerloRemix

    Axolotl Leaning on a Heart

    por el generador de patrones

    Dificultad
    3/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Gamer Axolotl with Headphones
    Generador
    TejerloRemix

    Gamer Axolotl with Headphones

    por el generador de patrones

    Dificultad
    3/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Seahorse Holding a Pearl
    Generador
    TejerloRemix

    Seahorse Holding a Pearl

    por el generador de patrones

    Dificultad
    3/3
    Rareza
    1/5
    Veces tejido
    0
  • Vista previa de Offended Puffed-Up Pufferfish
    Generador
    TejerloRemix

    Offended Puffed-Up Pufferfish

    por el generador de patrones

    Dificultad
    2/3
    Rareza
    1/5
    Veces tejido
    0
  • V××V××V×××V×××V×××××V××××V××××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done