amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales marinos

Jumping Dolphin on a Beach Ball patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 72 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales marinos

Dificultad
2/3
Tiempo
~2 h
Tamaño
9.2 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

Free crochet dolphin pattern: a Jumping Dolphin on a Beach Ball amigurumi, about 9 cm tall in DK yarn with a 2.5 mm hook. The grey-blue dolphin with a white belly arches over a striped beach ball with rosy cheeks and wide round eyes. You need about 60 m of yarn: 30 m blue grey, 10 m white, 5 m yellow, 5 m red, 5 m pink and 5 m blue. Plan on roughly 2 hours. A cheerful shelf or nursery toy, or a summer gift for dolphin and sea lovers. Spin the 3D model and follow the round-by-round pattern.

Cómo tejer Jumping Dolphin on a Beach Ball a crochet

Intermedio · 9 cm de alto · unas 2 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 10 piezas en vueltas: Body, Tail fluke ×2, Dorsal fin, Flipper ×2, Snout, Cheek ×2, Beach ball (72 vueltas en total).
  2. Rellénalo y móntalo en 10 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 11 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 52 vueltas hechas

  19. Size before assembly: about 5 cm at the widest, 10.2 cm long; 30 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre bottom line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  20. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  21. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside. Bend ≈ 78° around round 22<!-- the bend spreads over 22 rounds -->. After stuffing, bend the piece so the inner side of the bend faces down on the finished toy (on the piece: in round 22, on the centre bottom line). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 18 to round 27, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 9 rounds) and fasten off inside.

  7. Size before assembly: about 1.9 cm at the widest, 2.3 cm long; 7 rounds.
  8. → Start stuffing (lightly) and keep adding as you decrease.
  9. Press the piece flat to about 5 mm thick (oval cross-section).<!-- press the piece flat by 75 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

  6. Size before assembly: about 1.8 cm at the widest, 1.5 cm long; 5 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 1.3 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 18 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 35 %) -->

  6. Size before assembly: about 1.6 cm at the widest, 2.9 cm long; 8 rounds.
  7. → Start stuffing (lightly) and keep adding as you decrease.
  8. Press the piece flat to about 5 mm thick (oval cross-section).<!-- press the piece flat by 70 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 9 stitches of the last round, pull tight and hide the end inside.

  5. Size before assembly: about 1.6 cm at the widest, 2 cm long; 6 rounds.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  13. Size before assembly: about 4.1 cm at the widest, 3.6 cm long; 14 rounds.
  14. Change to white (pull it through on the last yarn-over of R3).
  15. Change to yellow (pull it through on the last yarn-over of R6).
  16. Change to white (pull it through on the last yarn-over of R9).
  17. Change to blue (pull it through on the last yarn-over of R11).
  18. → Start stuffing (firmly) and keep adding as you decrease.
  19. Change to red (pull it through on the last yarn-over of R13).
  20. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 8 mm (on the body): in round 28, 7 st apart (count along round 28: about 3.6 st each side of the centre bottom line).

Body · R1–R5–12

MR××××××VVVVVV××××××

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    ×××××××V×V×V×V×V×V××××××××××××××××××
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done