PDF A4: materiales, cada vuelta con casilla, montaje y cara
Free crochet donut ornament pattern: a Donut Wreath Ornament amigurumi, about 10 cm tall in DK yarn with a 2.5 mm hook. It is a golden donut with a wide open hole, green icing, red and white sprinkles and a small red bow on top, with a smiling face on the lower front of the ring and a gold hanging loop.
You need about 35 m of yarn: 15 m green, 10 m golden brown, 5 m red, 5 m gold and 5 m rose. Plan on roughly 1 hour.
It makes a funny tree ornament or a gift tag topper for anyone who loves donuts and holidays. A quick beginner project: the donut is one simple piece worked in the round. The 3D model turns so you can check every side while you follow the round-by-round pattern.
Cómo tejer Donut Wreath Ornament a crochet
Para principiantes · 10 cm de alto · unas 2 h · hilo DK · ganchillo de 2.5 mm
Teje las 7 piezas en vueltas: Donut, Cheek ×2, Hanging loop, Bow loop ×2, Bow knot (22 vueltas en total).
Rellénalo y móntalo en 5 pasos; cada uno se ilumina en el modelo 3D donde va.
Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.
Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.
1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.
Cómo se teje
Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.
Size before assembly: about 8 cm at the widest, 4.3 cm long; 13 rounds.
Change to golden brown (pull it through on the last yarn-over of R3).
Change to green (pull it through on the last yarn-over of R7).
Fasten off leaving a long tail (30–40 cm) for sewing.
Insert the safety nose/eyes now, while the piece is open (positions: see “Face”).
Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.
A flat circle about 1.5 cm across; 2 rounds.
Fasten off leaving a long tail (30–40 cm) for sewing.
Do not stuff.
Size before assembly: about 2 cm at the widest, 0.7 cm long; 2 rounds.
Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in gold (same rounds, no colour changes).
Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.
A flat oval about 2.6 × 2.2 cm; 3 rounds.
Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
With red: ch 3.
Fasten off leaving a long tail (30–40 cm) for sewing.
Do not stuff.
A flat oval about 2.3 × 1.5 cm; 2 rounds.
Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running front to back. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
With red: ch 4.
Fasten off leaving a long tail (30–40 cm) for sewing.
Do not stuff.
Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.
Safety eyes with a printed glint 10 mm (on the donut): between rounds 11 and 12, 43 st apart (count along round 11: about 2.4 st each side of the centre bottom line).
Satin stitch (on the donut): in red thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 40° anticlockwise (looking at that surface); centred between rounds 10 and 11, 7 st from the centre top line, toward the toy's left .
Satin stitch (on the donut): in red thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 20° clockwise (looking at that surface); centred in round 10, 12 st from the centre top line, toward the toy's left .
Satin stitch (on the donut): in red thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° clockwise (looking at that surface); centred in round 11, 14.5 st from the centre top line, toward the toy's left .
Satin stitch (on the donut): in white thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred in round 10, 8 st from the centre bottom line, toward the toy's left .
Satin stitch (on the donut): in red thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 95° clockwise (looking at that surface); centred between rounds 12 and 13, 7 st from the centre top line, toward the toy's left .
Satin stitch (on the donut): in red thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 45° clockwise (looking at that surface); centred in round 12, 11 st from the centre top line, toward the toy's left .
Satin stitch (on the donut): in white thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred between rounds 12 and 13, 7 st from the centre bottom line, toward the toy's left .
Satin stitch (on the donut): in red thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 15° anticlockwise (looking at that surface); centred between rounds 9 and 10, 9.5 st from the centre bottom line, toward the toy's right .
Satin stitch (on the donut): in red thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 45° clockwise (looking at that surface); centred in round 11, 14 st from the centre top line, toward the toy's right .
Abreviaturas
MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done
Nadie ha mostrado el suyo todavía. Sé la primera persona.
Satin stitch (on the donut): in red thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred in round 10, 11 st from the centre top line, toward the toy's right .
Satin stitch (on the donut): in white thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 45° clockwise (looking at that surface); centred in round 11, 7 st from the centre top line, toward the toy's right .
Satin stitch (on the donut): in red thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 40° anticlockwise (looking at that surface); centred between rounds 12 and 13, 14 st from the centre top line, toward the toy's right .
Satin stitch (on the donut): in red thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred between rounds 12 and 13, 10 st from the centre top line, toward the toy's right .
Satin stitch (on the donut): in red thread in several layers so it stands out, a oval about 1.8 mm wide and 5.5 mm tall, horizontal stitches, turned 70° anticlockwise (looking at that surface); centred in round 12, 5 st from the centre top line, toward the toy's right .
Embroidery in dark brown thread (on the donut), straight stitches through: (between rounds 11 and 12, 2 st from the centre bottom line, toward the toy's left ) → (in round 11, 1.5 st from the centre bottom line, toward the toy's left ) → (between rounds 10 and 11, 0.5 st from the centre bottom line, toward the toy's left ) → (in round 10, on the centre bottom line ) → (between rounds 10 and 11, 0.5 st from the centre bottom line, toward the toy's right ) → (in round 11, 1.5 st from the centre bottom line, toward the toy's right ) → (between rounds 11 and 12, 2 st from the centre bottom line, toward the toy's right ).
