amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Angry Duck in a Raincoat patrón de crochet

por el generador de patronesAnimales

Dificultad
2/3
Tiempo
~4 h
Tamaño
12.5 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

Free crochet duck pattern: a Angry Duck in a Raincoat amigurumi, about 13 cm tall in DK yarn with a 2.5 mm hook. A white duck with a bright orange bill and furious black brows peeks out of a yellow raincoat hood, with red rain boots and a little blue raindrop on top. You need about 115 m of yarn: 55 m yellow, 40 m white, 10 m red, 5 m orange and 5 m blue. Plan on roughly 4 hours. A grumpy rainy-day desk buddy, or a gift for anyone who never leaves home without an umbrella. Spin the 3D model and follow the round-by-round pattern, including the worked-in-turned-rows hood.

Cómo tejer Angry Duck in a Raincoat a crochet

Intermedio · 13 cm de alto · unas 4 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 10 piezas en vueltas: Body, Head, Hood, Bill, Boot ×2, Tail, Wing ×2, Raindrop (96 vueltas en total).
  2. Rellénalo y móntalo en 8 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 10 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 78 vueltas hechas

  11. Size before assembly: about 7.6 cm at the widest, 3.5 cm long; 14 rounds.
  12. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  29. Size before assembly: about 9.1 cm at the widest, 8.6 cm long; 32 rounds.
  30. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  31. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  20. Size before assembly: about 10.1 cm at the widest, 7.1 cm long; 27 rounds.
  21. Opening: from round 19 on, work in turned rows: leave the 30 st at the centre front (15 and 15 st on either side of the round-start marker) unworked - the opening (for the face). Sl st across 15 st to the edge of the opening (not counted) and work the first row; at the end of every row ch 1 (not counted) and turn.
  22. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  5. Size before assembly: an oval about 2.4 × 1.6 cm at the widest, 1.6 cm long; 5 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  6. With orange: ch 4.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 40 %).

  6. Size before assembly: about 2.3 cm at the widest, 1.7 cm long; 6 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 1.1 cm thick.<!-- flattened 50 % -->

  5. Size before assembly: about 1.9 cm at the widest, 1.1 cm long; 4 rounds.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  4. A flat oval about 4.2 × 2.2 cm; 3 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running front to back. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  5. With yellow: ch 7.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  6. Size before assembly: about 1.4 cm at the widest, 1.5 cm long; 5 rounds.
  7. → Start stuffing (lightly) and keep adding as you decrease.
  8. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 4 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the head): in round 16, 10 st apart (count along round 16: about 5 st each side of the centre front line).
  • Embroidery in black thread (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 13, 7.5 st from the centre front line, toward the toy's left ) → (in round 14, 5.5 st from the centre front line, toward the toy's left ) → (between rounds 15 and 16, 3 st from the centre front line, toward the toy's left ).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done