amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Goose with Attitude patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 99 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
2/3
Tiempo
~3 h
Tamaño
12.4 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

Free crochet goose pattern: a Goose with Attitude amigurumi, about 12 cm tall in DK yarn with a 2.5 mm hook. A white goose with an orange beak, small round eyes under angry slanted brows and a tiny grey toy dagger held at its side. You need about 80 m of yarn: 60 m white, 10 m orange, 5 m grey and 5 m dark grey. Plan on roughly 3 hours. A cheeky gift for goose fans and anyone with a sense of humour. Rotate the 3D model to see the dagger from every side, then follow the round-by-round pattern.

Cómo tejer Goose with Attitude a crochet

Intermedio · 12 cm de alto · unas 3 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 9 piezas en vueltas: Body, Head and neck, Beak, Wing ×2, Tail, Foot ×2, Toy dagger (99 vueltas en total).
  2. Rellénalo y móntalo en 7 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 9 reunidos

Muestra

RemixTejerlo

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 67 vueltas hechas

  22. Size before assembly: about 7.7 cm at the widest, 8.7 cm long; 30 rounds.
  23. → Start stuffing (firmly) and keep adding as you decrease.
  24. Press the piece flat to about 6.8 cm thick (oval cross-section).<!-- press the piece flat by 12 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  16. Size before assembly: about 5.4 cm at the widest, 7.8 cm long; 24 rounds.
  17. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 50° around round 15<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 15, on the centre front line). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 13 to round 17, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 4 rounds) and fasten off inside.

  7. Size before assembly: about 1.5 cm at the widest, 1.9 cm long; 6 rounds.
  8. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  8. Size before assembly: about 2.4 cm at the widest, 3.2 cm long; 10 rounds.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 1.1 cm thick.<!-- flattened 55 % -->

  6. Size before assembly: about 1.3 cm at the widest, 1.6 cm long; 5 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.<!-- flattened 50 % -->

  6. Size before assembly: about 1.8 cm at the widest, 2.2 cm long; 7 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 85 % -->

  9. Size before assembly: about 1.2 cm at the widest, 6.1 cm long; 17 rounds.
  10. Change to grey (pull it through on the last yarn-over of R7).
  11. → Start stuffing (lightly) and keep adding as you decrease.
  12. Press the piece flat to about 3 mm thick (oval cross-section).<!-- press the piece flat by 80 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 4 stitches of the last round, pull tight and hide the end inside.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 8 mm (on the head and neck): in round 9, 9 st apart (count along round 9: about 4.4 st each side of the centre front line).
  • Embroidery in black thread (on the head and neck) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 6, 5 st from the centre front line, toward the toy's left ) → (in round 7, 4 st from the centre front line, toward the toy's left ) → (in round 8, 3 st from the centre front line, toward the toy's left ).

Body · R1–R5

MR×××××××V×V×V××V××

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    V××V××V×××V×××V×××××V××××V××××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done