amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Halloween Spider patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 67 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
2/3
Tiempo
~3 h
Tamaño
11.7 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

A free crochet spider pattern for a round black amigurumi spider with eight striped legs, big felt-backed eyes and a tiny purple witch hat. The legs have purple stripes and orange tips and bend at the knee, and this spider plushie smiles with two little white fangs. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook and stands about 12 cm (4.5 in) tall with the hat; the legs are lightly stuffed tubes and the brim starts from a chain ring. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see where each leg goes.

Cómo tejer Halloween Spider a crochet

Intermedio · 12 cm de alto · unas 3 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 13 piezas en vueltas: Body, Leg ×8, Witch hat, Hat brim, Cheek ×2 (67 vueltas en total).
  2. Rellénalo y móntalo en 8 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 11 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 51 vueltas hechas

  23. Size before assembly: about 8.5 cm at the widest, 7.3 cm long; 29 rounds.
  24. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  25. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  9. Size before assembly: about 1.3 cm at the widest, 6 cm long; 17 rounds.
  10. Change to spider (pull it through on the last yarn-over of R3).
  11. Change to purple (pull it through on the last yarn-over of R5).
  12. Change to spider (pull it through on the last yarn-over of R7).
  13. Change to purple (pull it through on the last yarn-over of R9).
  14. Change to spider (pull it through on the last yarn-over of R11).
  15. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 100° around round 8.5<!-- the bend spreads over 2 rounds -->. After stuffing, bend the piece so the inner side of the bend faces down on the finished toy (on the piece: in round 8, 2 st from the centre front line, downward <!-- st 2.07 down -->). On the inner side draw rounds 7 and 10 together (3 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  16. Size before assembly: about 3.2 cm at the widest, 5.1 cm long; 15 rounds.
  17. Change to band (pull it through on the last yarn-over of R11).
  18. Change to hat (pull it through on the last yarn-over of R13).
  19. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 45° around round 5<!-- the bend spreads over 3 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's right on the finished toy (on the piece: in round 5, 2.5 st from the centre front line, toward the toy's right <!-- st 2.27 right -->). On the inner side draw rounds 4 and 5 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside.

  6. Size before assembly: about 5.9 cm at the widest, 1.1 cm long; 5 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  2. A flat circle about 0.9 cm across; 1 rounds.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Felt (felt), 2 ovals 20×21 mm (on the body) (symmetric: the toy's left side is described, the right is its mirror image), glue or sew on: in round 15, 4 st from the centre front line, toward the toy's left.
  • Safety eyes with a printed glint 14 mm (on the body): between rounds 15 and 16, 8 st apart (count along round 15: about 4 st each side of the centre front line).
  • Embroidery in mouth thread (on the body), straight stitches through: (in round 18, 1.5 st from the centre front line, toward the toy's right ) → (in round 19, 1 st from the centre front line, toward the toy's right ) → (in round 19, on the centre front line ) → (in round 19, 1 st from the centre front line, toward the toy's left ) → (in round 18, 1.5 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the body): in fang thread, a triangle about 3.8 mm wide and 4.6 mm tall, horizontal stitches, turned 180° clockwise (looking at that surface); centred in round 20, 1 st from the centre front line, toward the toy's right .
  • Satin stitch (on the body): in fang thread, a triangle about 3.8 mm wide and 4.6 mm tall, horizontal stitches, turned 180° clockwise (looking at that surface); centred in round 20, 1 st from the centre front line, toward the toy's left .

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done