amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Highland Cow patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 127 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
3/3
Tiempo
~5 h
Tamaño
14.3 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

This free crochet highland cow pattern makes a chubby sitting calf amigurumi with shaggy curled bangs and long cream horns. The highland cow plushie is ginger with darker rust curls on the forehead and around the neck, big floppy ears with pink insides, a soft pink muzzle and dark brown hooves. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook and ends up about 14 cm (5.5 in) tall, with 10 mm safety eyes and curled yarn strands knotted on for the fringe. Follow it row by row with stitch counts and turn the interactive 3D model to see where the horns, ears and curls go.

Cómo tejer Highland Cow a crochet

Avanzado · 14 cm de alto · unas 5 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 18 piezas en vueltas: Body, Head, Muzzle, Ear ×2, Inner ear ×2, Horn ×2, Front leg with hoof ×2, Haunch (applique) ×2, Hind leg with hoof ×2, Tail with ball tip, Cheek ×2 (127 vueltas en total).
  2. Rellénalo y móntalo en 11 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 11 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 99 vueltas hechas

  16. Size before assembly: about 7.9 cm at the widest, 4.8 cm long; 18 rounds.
  17. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  29. Size before assembly: about 8.8 cm at the widest, 7.8 cm long; 30 rounds.
  30. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  31. Press the piece flat to about 7.7 cm thick (oval cross-section).<!-- press the piece flat by 12 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  6. Size before assembly: an oval about 5.2 × 3.2 cm at the widest, 3.2 cm long; 10 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  7. With pink: ch 7.
  8. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  9. Size before assembly: about 3.9 cm at the widest, 3.7 cm long; 12 rounds.
  10. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 6.5 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 39 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 80 %) -->

  4. A flat oval about 4.6 × 2.2 cm; 3 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 3 more (not counted in any round) and place the marker there. The increases fall on the turns.
  5. With pink: ch 8.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  12. Size before assembly: about 2.2 cm at the widest, 5 cm long; 14 rounds.
  13. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 65° around round 7<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 7, 2.5 st from the centre front line, upward <!-- st 2.35 up -->). On the inner side draw rounds 6 and 8 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 2 st, pull to the angle and hide the end inside. Bend the second piece as a mirror image.

  9. Size before assembly: about 2.4 cm at the widest, 3.9 cm long; 12 rounds.
  10. Change to ginger (pull it through on the last yarn-over of R5).
  11. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 35° around round 5<!-- the bend spreads over 2 rounds -->. After stuffing, bend the piece so the inner side of the bend faces forward on the finished toy (on the piece: in round 5, on the centre front line). On the inner side draw rounds 4 and 6 together (2 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 4 st, pull to the angle and hide the end inside. Bend the second piece as a mirror image.

  6. A flat circle about 3.8 cm across; 5 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  9. Size before assembly: about 2.8 cm at the widest, 3.1 cm long; 10 rounds.
  10. Change to ginger (pull it through on the last yarn-over of R5).
  11. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  7. Size before assembly: about 1.6 cm at the widest, 3.7 cm long; 11 rounds.
  8. Change to ginger (pull it through on the last yarn-over of R5).
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  3. A flat circle about 1.5 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10 mm (on the Head): between rounds 14 and 15, 11 st apart (count along round 14: about 5.5 st each side of the centre front line).
  • Satin stitch (on the Muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image): in rose thread, a oval about 4.5 mm wide and 6.5 mm tall, horizontal stitches; centred between rounds 3 and 4, 3 st from the centre top line, toward the toy's left .
  • Fringe (on the Head): cut 12 pieces of yarn (rust, ginger) about 68 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along between rounds 4 and 5, 4.5 st from the centre front line, toward the toy's right -> in round 4, on the centre front line -> between rounds 4 and 5, 4.5 st from the centre front line, toward the toy's left , evenly spaced. Trim to about 24 mm. Curl the strands (see the last item of this section).
  • Fringe (on the Head): cut 13 pieces of yarn (rust, ginger) about 68 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along between rounds 6 and 7, 7 st from the centre front line, toward the toy's right -> in round 6, on the centre front line -> between rounds 6 and 7, 7 st from the centre front line, toward the toy's left, evenly spaced. Trim to about 24 mm. Curl the strands (see the last item of this section).
  • Fringe (on the Head): cut 13 pieces of yarn (rust, ginger) about 64 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along between rounds 8 and 9, 8.5 st from the centre front line, toward the toy's right -> in round 8, on the centre front line -> between rounds 8 and 9, 8.5 st from the centre front line, toward the toy's left , evenly spaced. Trim to about 22 mm. Curl the strands (see the last item of this section).
  • Fringe (on the Head): cut 12 pieces of yarn (rust, ginger) about 56 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along between rounds 10 and 11, 8 st from the centre front line, toward the toy's right -> in round 10, on the centre front line -> between rounds 10 and 11, 8 st from the centre front line, toward the toy's left , evenly spaced. Trim to about 18 mm. Curl the strands (see the last item of this section).
  • Mane (on the Head): cut 10 pieces of yarn (rust, ginger) about 64 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along in round 3, 5 st from the centre front line, toward the toy's left -> in round 2, on the centre back line -> in round 3, 5 st from the centre front line, toward the toy's right, evenly spaced. Trim to about 22 mm. Curl the strands (see the last item of this section).

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
  • Strands (mane) (on the Body): cut 34 pieces of yarn (rust, ginger) about 56 mm long; fold each in half and attach with a lark's head knot (pull through a stitch with the hook) along between rounds 16 and 17, on the centre front line -> between rounds 16 and 17, 13.5 st from the centre front line, toward the toy's left -> between rounds 16 and 17, on the centre back line -> between rounds 16 and 17, 13.5 st from the centre front line, toward the toy's right -> between rounds 16 and 17, on the centre front line, evenly spaced. Trim to about 18 mm. Curl the strands (see the last item of this section).
  • Curling the strands: Curls: before knotting, wrap the pieces tightly in a spiral around a knitting needle or a wooden skewer (3–4 mm), tape the ends, dampen (or steam with an iron held above, not touching) and let them dry completely on the needle; slide them off and they stay curly. For fluffy waves instead, untwist each strand into its plies and brush lightly. Note: instead of knotted strands the fringe can be worked as loop stitches along the rounds — an alternative that is not part of this pattern's stitch counts.
    • ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done