amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Fantasía

Little Robot patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 77 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesFantasía

Dificultad
2/3
Tiempo
~3 h
Tamaño
12.9 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

A free crochet robot pattern for a friendly little robot with a wide boxy head, a dark screen face and an antenna topped with a coral ball. This amigurumi robot is light grey with teal ear bolts, pincer claw hands, chunky feet and three colorful buttons, and its screen shows glowing teal eyes, a smile and coral cheeks. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook and stands about 13 cm (5 in) tall; the face is embroidered on a crocheted screen and the oval head gets crisp edges from back loop rounds. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see every piece.

Cómo tejer Little Robot a crochet

Intermedio · 13 cm de alto · unas 3 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 18 piezas en vueltas: Body, Head, Screen, Antenna, Antenna ball, Ear bolt ×2, Coral button, Yellow button, Teal button, Arm ×2, Claw finger ×4, Foot ×2 (77 vueltas en total).
  2. Rellénalo y móntalo en 13 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 10 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 53 vueltas hechas

  10. Size before assembly: about 5 cm at the widest, 5.4 cm long; 17 rounds.
  11. Change to teal (pull it through on the last yarn-over of R6).
  12. Change to metal (pull it through on the last yarn-over of R9).
  13. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  15. Size before assembly: an oval about 8.6 × 5 cm at the widest, 5.6 cm long; 20 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the top of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns.
  16. With metal: ch 11.
  17. → Start stuffing (firmly) and keep adding as you decrease.
  18. Press the piece flat to about 7.6 cm thick (oval cross-section).<!-- press the piece flat by 12 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 22 stitches of the last round, pull tight and hide the end inside.

  5. A flat oval about 4.5 × 2.9 cm; 4 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  6. With screen: ch 6.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  3. Size before assembly: about 0.7 cm at the widest, 1.7 cm long; 5 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  5. Size before assembly: about 1.4 cm at the widest, 1.2 cm long; 4 rounds.
  6. → Start stuffing (firmly) and keep adding as you decrease.
  7. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  5. Size before assembly: about 1.6 cm at the widest, 1 cm long; 4 rounds.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  2. A flat circle about 0.8 cm across; 1 rounds.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  2. A flat circle about 0.8 cm across; 1 rounds.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  2. A flat circle about 0.8 cm across; 1 rounds.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  4. Size before assembly: about 1.2 cm at the widest, 2.8 cm long; 8 rounds.
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  5. Size before assembly: about 1 cm at the widest, 1.6 cm long; 5 rounds.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly, then press the piece slightly flat (oval cross-section; flattened 40 %).

  7. Size before assembly: an oval about 2.9 × 2.1 cm at the widest, 1.9 cm long; 7 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs vertically, top to bottom; the starting chain is at the front of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
  8. With teal: ch 4.
  9. → Start stuffing (firmly) and keep adding as you decrease.
  10. Press the piece flat to about 1.9 cm thick (oval cross-section).<!-- press the piece flat by 35 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 8 stitches of the last round, pull tight and hide the end inside.

The whole face is embroidered. Order: the eyes (black satin), then the white glints over them, then the nose and mouth, blush last. Mark the centres with pins first and compare with the picture. Bring thread ends out where a sewn-on piece will cover them, or bury them in the stuffing.

  • Embroidered eyes (on the screen) (2, symmetric: the toy's left side is described, the right is its mirror image): in glow thread, a oval about 6 mm wide and 8 mm tall, horizontal stitches; centred in round 3, 4 st from the centre top line, toward the toy's left.
  • Embroidery in glow thread (on the screen), straight stitches through: (between rounds 2 and 3, 1.5 st from the centre bottom line, toward the toy's left ) → (in round 3, 1 st from the centre bottom line, toward the toy's left ) → (in round 3, on the centre bottom line ) → (in round 3, 1 st from the centre bottom line, toward the toy's right ) → (between rounds 2 and 3, 1.5 st from the centre bottom line, toward the toy's right ).
  • Satin stitch (on the screen) (2, symmetric: the toy's left side is described, the right is its mirror image): in coral thread, a oval about 5 mm wide and 3 mm tall, horizontal stitches; centred between rounds 3 and 4, 6.5 st from the centre top line, toward the toy's left .

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done