amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Mini Dachshund Keychain patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 82 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
2/3
Tiempo
~2 h
Tamaño
6.4 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

A free crochet dog keychain pattern for a tiny long-bodied dachshund with soft drop ears and a round loop on its back for a key ring. This amigurumi dachshund is chocolate brown with a long tan snout, tan eyebrow dots, rosy cheeks and tan toes on four stubby legs. It is worked in the round in single crochet with fingering yarn and a 2 mm hook, stands about 6 cm (2.5 in) tall and 12 cm (4.75 in) long, and has 7 mm safety eyes and a safety nose; the loop is a small doubled ring of single crochet sewn on by its edge. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to check every piece.

Cómo tejer Mini Dachshund Keychain a crochet

Intermedio · 6 cm de alto · unas 2 h · hilo fingering · ganchillo de 2 mm

  1. Teje las 13 piezas en vueltas: Body, Head, Muzzle, Ear ×2, Cheek ×2, Leg ×4, Tail, Key ring loop (82 vueltas en total).
  2. Rellénalo y móntalo en 9 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 10 reunidos

RemixTejerlo

Muestra

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 47 vueltas hechas

  11. Size before assembly: about 3.1 cm at the widest, 8.4 cm long; 33 rounds.
  12. → Start stuffing (firmly) and keep adding as you decrease.
  13. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  15. Size before assembly: about 3.6 cm at the widest, 3.1 cm long; 16 rounds.
  16. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  17. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  5. Size before assembly: an oval about 1.9 × 1 cm at the widest, 2.1 cm long; 8 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  6. With tan: ch 5.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  8. Size before assembly: about 1.6 cm at the widest, 2.5 cm long; 10 rounds.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 1.5 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 4.2 mm thick); about 16 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) --> Bend ≈ 90° around round 7<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 2 twist 1 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 7, 1 st from the centre bottom line, toward the back <!-- st 0.79 back -->). If the ear sticks out, smooth it down along the head by hand.

  3. A flat circle about 1.1 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  6. Of these: front — 2 (left and right); hind — 2 (left and right). Size before assembly: about 0.9 cm at the widest, 1.2 cm long; 5 rounds.
  7. Change to choco (pull it through on the last yarn-over of R3).
  8. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  4. Size before assembly: about 0.6 cm at the widest, 1.5 cm long; 6 rounds.
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  3. Size before assembly: about 1.5 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in loop red (same rounds, no colour changes).
  4. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 7 mm (on the head): between rounds 9 and 10, 7 st apart (count along round 9: about 3.3 st each side of the centre front line).
  • Safety nose, oval, 6×4.5 mm (on the muzzle): between rounds 1 and 2, on the centre top line. Colour nose black #1f1b1a.
  • Satin stitch (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image): in tan thread, a oval about 3.6 mm wide and 2.6 mm tall, horizontal stitches, turned 12° anticlockwise (looking at that surface); centred in round 7, 2.5 st from the centre front line, toward the toy's left .

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done