amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Frog in an Elf Hat Ornament patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 52 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
1/3
Tiempo
~2 h
Tamaño
7.8 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

A free crochet frog pattern for a round green ornament in a striped elf hat, ready to hang on the Christmas tree. This amigurumi frog has big eye bumps, pink cheeks, a cream tummy and a red-and-green hat topped with a little gold bell and a closed gold loop. It is worked in the round in single crochet with fingering yarn and a 2 mm hook and stands about 7.8 cm (3 in) tall; the body is one stuffed ball, and the eye bumps, tummy, paws and hat are sewn on, with safety eyes with a glint (embroider them for small children). Follow it row by row with stitch counts and turn the interactive 3D model to check every piece.

Cómo tejer Frog in an Elf Hat Ornament a crochet

Para principiantes · 8 cm de alto · unas 2 h · hilo fingering · ganchillo de 2 mm

  1. Teje las 11 piezas en vueltas: Head-body ball, Cream belly, Eye bump ×2, Cheek ×2, Paw ×2, Elf hat, Bell, Hanging loop (52 vueltas en total).
  2. Rellénalo y móntalo en 8 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 12 reunidos

RemixTejerlo

Muestra

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 45 vueltas hechas

  17. Size before assembly: about 4.3 cm at the widest, 3.6 cm long; 19 rounds.
  18. → Start stuffing (firmly) and keep adding as you decrease.
  19. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  5. A flat oval about 2.8 × 2.2 cm; 4 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  6. With cream: ch 4.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  5. Size before assembly: about 1.2 cm at the widest, 1.5 cm long; 6 rounds.
  6. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  7. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  3. A flat circle about 1 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  4. Size before assembly: about 0.8 cm at the widest, 0.7 cm long; 3 rounds.
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 4 mm thick.<!-- flattened 50 % -->

  11. Size before assembly: about 3 cm at the widest, 2.5 cm long; 11 rounds.
  12. Change to santa red (pull it through on the last yarn-over of R2).
  13. Change to elf green (pull it through on the last yarn-over of R4).
  14. Change to santa red (pull it through on the last yarn-over of R6).
  15. Change to elf green (pull it through on the last yarn-over of R8).
  16. Change to santa red (pull it through on the last yarn-over of R10).
  17. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Bend ≈ 40° around round 6<!-- the bend spreads over 3 rounds -->. Bend the piece so the inner side of the bend faces backward on the finished toy (on the piece: in round 6, on the centre back line). On the inner side draw rounds 4 and 7 together (3 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 6 st, pull to the angle and hide the end inside.

  5. Size before assembly: about 1 cm at the widest, 1.3 cm long; 5 rounds.
  6. → Start stuffing (firmly) and keep adding as you decrease.
  7. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  3. Size before assembly: about 1.5 cm at the widest (lies flat); 2 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below and 1 plain in soft gold (same rounds, no colour changes).
  4. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 16 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eye with a printed glint 7 mm (on the eye bump) (2: one on each eye bump; the left one is described, the right is its mirror): in round 3, on the centre front line .
  • Embroidery in dark green thread (on the head-body ball), straight stitches through: (between rounds 12 and 13, 3 st from the centre front line, toward the toy's right ) → (in round 11, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 10 and 11, 0.5 st from the centre front line, toward the toy's right ) → (between rounds 10 and 11, 0.5 st from the centre front line, toward the toy's left ) → (in round 11, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 12 and 13, 3 st from the centre front line, toward the toy's left ).

Head-body ball · R1–R5

MR××××××VVVVVV×V×V×

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done