amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Polar Bear in a Scarf patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 95 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
2/3
Tiempo
~3 h
Tamaño
13.4 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

A free crochet polar bear pattern for a creamy white bear that sits up in a cozy red and green striped scarf, ready for the Christmas season. This amigurumi polar bear has small round ears, a black safety nose, shiny eyes and a short striped scarf end that falls over its chest. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook, the scarf is a ribbed chain ring sewn around the neck, and the finished bear is about 13 cm (5 in) tall. Follow it row by row with stitch counts and turn the interactive 3D model to check every piece before you sew it on; it makes a sweet handmade holiday gift.

Cómo tejer Polar Bear in a Scarf a crochet

Intermedio · 13 cm de alto · unas 3 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 12 piezas en vueltas: Body, Head, Muzzle, Ear ×2, Scarf, Scarf end, Arm ×2, Leg ×2, Tail (95 vueltas en total).
  2. Rellénalo y móntalo en 9 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 9 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 69 vueltas hechas

  15. Size before assembly: about 7.5 cm at the widest, 6.3 cm long; 21 rounds.
  16. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  21. Size before assembly: about 7.6 cm at the widest, 6.6 cm long; 26 rounds.
  22. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  23. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  5. Size before assembly: an oval about 3.4 × 2.2 cm at the widest, 1.8 cm long; 6 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  6. With cream: ch 5.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  5. Size before assembly: about 2.5 cm at the widest, 1.2 cm long; 4 rounds.
  6. Change to cream (pull it through on the last yarn-over of R1).
  7. → This piece is not stuffed.
  8. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside. Do not stuff. Shape it into a dish: rounds 1–2 are the front of the piece, the magic ring its centre. Push the centre in so the front is concave (about 2.1 mm at the centre) and turn rounds 3–4 to the back: they make a thick rounded rim (about 8 mm thick) and lie behind as a second layer; the piece is about 25 mm across.<!-- (dish 50 %) -->

  4. Size before assembly: about 6.2 cm at the widest, 1.8 cm long; 3 rounds.
  5. Change to scarf green (pull it through on the last yarn-over of R1).
  6. Change to scarf red (pull it through on the last yarn-over of R2).
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  6. Size before assembly: an oval about 1.7 × 0.5 cm at the widest, 3.2 cm long; 9 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  7. With scarf green: ch 5.
  8. Change to scarf red (pull it through on the last yarn-over of R2).
  9. Change to scarf green (pull it through on the last yarn-over of R4).
  10. Change to scarf red (pull it through on the last yarn-over of R6).
  11. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 90 % --> Bend ≈ 75° around round 6<!-- the bend spreads over 3 rounds -->. Bend the piece so the inner side of the bend faces down on the finished toy (on the piece: in round 6, on the centre bottom line). It is a slight bend: tilt the piece as you sew it on; optionally tack the inner side with 1–2 stitches drawing rounds 6 and 7 together.

  8. Size before assembly: about 2 cm at the widest, 3.6 cm long; 11 rounds.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  9. Size before assembly: about 3.3 cm at the widest, 3.4 cm long; 11 rounds.
  10. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  5. Size before assembly: about 1.5 cm at the widest, 1.2 cm long; 4 rounds.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10 mm (on the head): in round 14, 8 st apart (count along round 14: about 3.8 st each side of the centre front line).
  • Safety nose, triangle, 11×8 mm (on the muzzle): between rounds 1 and 2, on the centre top line . Colour nose #1f1c1c.
  • Embroidery in nose thread (on the muzzle), straight stitches through: (in round 2, on the centre bottom line ) → (between rounds 2 and 3, on the centre bottom line ).
  • Embroidery in nose thread (on the muzzle) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 2 and 3, on the centre bottom line ) → (in round 3, 1.5 st from the centre bottom line, toward the toy's left ) → (in round 3, 3 st from the centre bottom line, toward the toy's left ).
  • Blush about 10 mm, dry pastel or blush (on the head, both sides): in round 17, 6.5 st from the centre front line, toward the toy's left . Colour blush.

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done