amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

Bunny with a Rain Cloud patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 94 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
3/3
Tiempo
~2 h
Tamaño
9.3 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

Free crochet easy bunny pattern: a Bunny with a Rain Cloud amigurumi, about 9 cm tall in fingering yarn with a 2 mm hook. A round white bunny with long floppy ears and a glum face, with a small grey rain cloud floating above its head on a short stalk and two blue raindrops falling. You need about 65 m of yarn: 30 m white, 25 m grey, 5 m light blue and 5 m pink. Plan on roughly 2 hours. A funny gift for anyone who has a gloomy day, or a cheerful shelf friend for bunny fans. Spin the 3D model to see the cloud and drops, and follow the round-by-round pattern.

Cómo tejer Bunny with a Rain Cloud a crochet

Avanzado · 9 cm de alto · unas 2 h · hilo fingering · ganchillo de 2 mm

  1. Teje las 14 piezas en vueltas: Ball body, Long ear ×2, Foot ×2, Cloud stalk, Rain cloud, Top cloud puff, Side cloud puff ×2, Raindrop ×2, Cheek ×2 (94 vueltas en total).
  2. Rellénalo y móntalo en 12 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 9 reunidos

RemixTejerlo

Muestra

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 78 vueltas hechas

  21. Size before assembly: about 5.6 cm at the widest, 4.6 cm long; 25 rounds.
  22. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  23. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  12. Size before assembly: about 2.1 cm at the widest, 3.8 cm long; 15 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre bottom line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  13. Change to white (pull it through on the last yarn-over of R12).
  14. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 2.2 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 4.2 mm thick); about 21 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 50 %) --> Bend ≈ 90° around round 15<!-- the bend spreads over 3 rounds --><!-- drape relax_mm 6 twist 0 -->. The piece is soft and unstuffed: do not tack a fold. Sewn on as the assembly says, it bends over the head by itself and hangs down; the inner side of the bend faces down on the finished toy (on the piece: in round 15, 0.5 st from the centre bottom line, toward the back <!-- st 0.53 back -->). Let it hang still turned the way it is sewn on (pinch it a little at the seam): its inside stays visible, it does not lie against the head.

  5. Size before assembly: about 1 cm at the widest, 1 cm long; 4 rounds.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  4. Size before assembly: about 0.9 cm at the widest, 1.8 cm long; 7 rounds.
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  12. Size before assembly: an oval about 4.8 × 2.7 cm at the widest, 2.5 cm long; 13 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the bottom of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns.
  13. With grey: ch 9.
  14. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly, then press the piece slightly flat (oval cross-section; flattened 20 %).

  13. Size before assembly: about 3.1 cm at the widest, 2 cm long; 12 rounds.
  14. → Start stuffing (firmly) and keep adding as you decrease.
  15. Press the piece flat to about 2.7 cm thick (oval cross-section).<!-- press the piece flat by 12 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  9. Size before assembly: about 2.3 cm at the widest, 1.7 cm long; 9 rounds.
  10. → Start stuffing (firmly) and keep adding as you decrease.
  11. Press the piece flat to about 1.7 cm thick (oval cross-section).<!-- press the piece flat by 25 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  8. Size before assembly: about 1 cm at the widest, 1.8 cm long; 7 rounds.
  9. → Start stuffing (firmly) and keep adding as you decrease.
  10. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 5 stitches of the last round, pull tight and hide the end inside.

  3. A flat circle about 1.1 cm across; 2 rounds.
  4. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 7 mm (on the ball body): in round 19, 6 st apart (count along round 19: about 3 st each side of the centre front line).
  • Embroidery in dark brown thread (on the ball body) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (between rounds 21 and 22, 1 st from the centre front line, toward the toy's left ) → (in round 21, 1.5 st from the centre front line, toward the toy's left ) → (in round 21, 2.5 st from the centre front line, toward the toy's left ) → (between rounds 20 and 21, 3.5 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the ball body): in rose thread, a oval about 5.5 mm wide and 3.8 mm tall, horizontal stitches; centred in round 18, on the centre front line .
  • Embroidery in dark brown thread (on the ball body), straight stitches through: (between rounds 16 and 17, 2 st from the centre front line, toward the toy's right ) → (in round 17, 1 st from the centre front line, toward the toy's right ) → (in round 17, on the centre front line) → (in round 17, 1 st from the centre front line, toward the toy's left ) → (between rounds 16 and 17, 2 st from the centre front line, toward the toy's left ).

Ball body · R1–R5

MR××××××VVVVVV×V×V×

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done