amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Fantasía

Santa Claus patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 110 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesFantasía

Dificultad
3/3
Tiempo
~4 h
Tamaño
14.2 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

A free crochet Santa pattern for a chubby little Santa Claus with a round belly, a big white beard and a red pointed hat with a pom-pom. This amigurumi Santa wears a red coat with white trim, a black belt with a gold buckle, black mittens and boots, and has fluffy white brows, a rosy ball nose and blushing cheeks. He is worked in the round in single crochet with DK yarn and a 2.5 mm hook, has 10 mm safety eyes, and stands about 14 cm (5.5 in) tall; the beard, moustache and brows are flat ovals sewn on. Follow the row-by-row pattern with stitch counts and turn the interactive 3D model to see where every piece goes on this Christmas gift.

Cómo tejer Santa Claus a crochet

Avanzado · 14 cm de alto · unas 4 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 14 piezas en vueltas: Body (coat), Head, Hat, Pom-pom, Beard, Moustache half ×2, Nose, Eyebrow ×2, Arm ×2, Boot ×2 (110 vueltas en total).
  2. Rellénalo y móntalo en 11 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 11 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 98 vueltas hechas

  17. Size before assembly: about 7.6 cm at the widest, 5.2 cm long; 18 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  18. Change to white (pull it through on the last yarn-over of R8).
  19. Change to black (pull it through on the last yarn-over of R12).
  20. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  29. Size before assembly: about 9.1 cm at the widest, 6.9 cm long; 29 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  30. Change to white (pull it through on the last yarn-over of R18).
  31. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  32. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  18. Size before assembly: about 7.1 cm at the widest, 6.2 cm long; 20 rounds.
  19. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 110° around round 8<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's right on the finished toy (on the piece: in round 8, 3.5 st from the centre front line, toward the toy's right <!-- st 3.38 right -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 6 to round 10, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 4 rounds) and fasten off inside.

  5. Size before assembly: about 1.6 cm at the widest, 1.6 cm long; 5 rounds.
  6. → Start stuffing (firmly) and keep adding as you decrease.
  7. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  10. A flat oval about 10.2 × 6.6 cm; 9 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns.
  11. With white: ch 11.
  12. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  4. A flat oval about 3.4 × 2.2 cm; 3 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  5. With white: ch 5.
  6. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  7. Size before assembly: about 2 cm at the widest, 1.7 cm long; 6 rounds.
  8. → Start stuffing (firmly) and keep adding as you decrease.
  9. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  3. A flat oval about 2.3 × 1.5 cm; 2 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  4. With white: ch 4.
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  9. Size before assembly: about 1.6 cm at the widest, 4.1 cm long; 12 rounds.
  10. Change to white (pull it through on the last yarn-over of R4).
  11. Change to red (pull it through on the last yarn-over of R6).
  12. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  6. Size before assembly: an oval about 2.5 × 2.1 cm at the widest, 1.8 cm long; 6 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs vertically, top to bottom; the starting chain is at the front of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
  7. With black: ch 3.
  8. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10 mm (on the head): in round 15, 10 st apart (count along round 15: about 4.8 st each side of the centre front line).
  • Strap (on the head): with white, ch 86 (≈ 25.7 cm); for a firmer strap sl st back along it. Sew it along (between rounds 11 and 12, on the centre back line ) → (between rounds 11 and 12, 20 st from the centre front line, toward the toy's right ) → (between rounds 11 and 12, 10 st from the centre front line, toward the toy's right ) → (between rounds 11 and 12, on the centre front line ) → (between rounds 11 and 12, 10 st from the centre front line, toward the toy's left ) → (between rounds 11 and 12, 20 st from the centre front line, toward the toy's left ) → (between rounds 11 and 12, on the centre back line ), catching it every 2–3 ch.
  • Blush about 9 mm, dry pastel or blush (on the head, both sides): between rounds 16 and 17, 7.5 st from the centre front line, toward the toy's left . Colour pink.

Body (coat) · R1–R5

MR××××××VVVVVV×V×V×

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done