amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales marinos

Shark in a Hoodie patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 93 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales marinos

Dificultad
2/3
Tiempo
~3 h
Tamaño
11.1 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

Free crochet shark pattern: a Shark in a Hoodie amigurumi, about 11 cm tall in DK yarn with a 2.5 mm hook. Grey-blue shark face in a pink hood with a toothy grin, a grey fin on top and white drawstrings on the pink hoodie body. You need about 95 m of yarn: 55 m pink, 15 m dark pink, 15 m grey, 5 m white and 5 m light pink. Plan on roughly 3 hours. Pair it with a desk, a shelf or a pile of pillows as a cosy sea buddy, or give it to someone who loves sharks and soft pink hoodies. Spin the 3D model and follow the round-by-round pattern at your own pace.

Cómo tejer Shark in a Hoodie a crochet

Intermedio · 11 cm de alto · unas 3 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 12 piezas en vueltas: Hoodie body, Head (hood), Hood trim, Shark face, Dorsal fin, Sleeve ×2, Hand fin, Tail fin, Pocket, Cheek ×2 (93 vueltas en total).
  2. Rellénalo y móntalo en 10 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 10 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 76 vueltas hechas

  1. Size before assembly: about 6.6 cm at the widest, 4.1 cm long; 15 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 8.2 cm at the widest, 6.1 cm long; 26 rounds.
  2. → Start stuffing (firmly) and keep adding as you decrease.
  3. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat oval about 9.4 × 6.6 cm; 9 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With dark pink: ch 9.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat oval about 8.7 × 5.9 cm; 8 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. With grey: ch 9.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Insert the safety nose/eyes now, while the piece is open (positions: see “Face”). Do not stuff.

  1. Size before assembly: about 2.1 cm at the widest, 3 cm long; 9 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 6 mm thick.<!-- flattened 70 % -->

  1. Size before assembly: about 1.6 cm at the widest, 3.4 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: about 1 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 3 mm thick.<!-- flattened 70 % -->

  1. Size before assembly: about 1.3 cm at the widest, 1.6 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 4 mm thick.<!-- flattened 70 % -->

  1. A flat oval about 5.3 × 3.7 cm; 5 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With dark pink: ch 6.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 0.6 cm across; 1 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 10–12 mm (on the shark face): in round 3, 15 st apart (count along round 3: about 7.6 st each side of the centre top line).
  • Satin stitch (on the shark face): in rose thread, a oval about 26 mm wide and 8 mm tall, horizontal stitches; centred in round 4, on the centre bottom line .
  • Satin stitch (on the shark face): in white thread in several layers so it stands out, a triangle about 4.2 mm wide and 4.2 mm tall, horizontal stitches; centred between rounds 4 and 5, 3 st from the centre bottom line, toward the toy's left .
  • Satin stitch (on the shark face): in white thread in several layers so it stands out, a triangle about 4.2 mm wide and 4.2 mm tall, horizontal stitches; centred between rounds 4 and 5, 1 st from the centre bottom line, toward the toy's left .
  • Satin stitch (on the shark face): in white thread in several layers so it stands out, a triangle about 4.2 mm wide and 4.2 mm tall, horizontal stitches; centred between rounds 4 and 5, 1 st from the centre bottom line, toward the toy's right .
  • Satin stitch (on the shark face): in white thread in several layers so it stands out, a triangle about 4.2 mm wide and 4.2 mm tall, horizontal stitches; centred between rounds 4 and 5, 3 st from the centre bottom line, toward the toy's right .
  • Embroidery in white thread (on the hoodie body), straight stitches through: (in round 15, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 14 and 15, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 12 and 13, 1.5 st from the centre front line, toward the toy's right ) → (between rounds 10 and 11, 1.5 st from the centre front line, toward the toy's right ).
  • Satin stitch (on the hoodie body): in white thread, a oval about 3.5 mm wide and 5 mm tall, horizontal stitches; centred in round 10, 1.5 st from the centre front line, toward the toy's right .
  • Embroidery in white thread (on the hoodie body), straight stitches through: (in round 15, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 14 and 15, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 12 and 13, 1.5 st from the centre front line, toward the toy's left ) → (between rounds 10 and 11, 1.5 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the hoodie body): in white thread, a oval about 3.5 mm wide and 5 mm tall, horizontal stitches; centred in round 10, 1.5 st from the centre front line, toward the toy's left .

Hoodie body · R1–R5

MR××××××VVVVVV×V×V×

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done