amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Animales

T-Rex patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 104 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesAnimales

Dificultad
3/3
Tiempo
~4 h
Tamaño
16.8 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

A free crochet T rex pattern for a friendly green dinosaur standing on big clawed feet, with a thick tail behind and a wide, toothy grin. This T-rex plushie has a pale yellow belly, tiny arms, dark green spikes from head to tail and little white triangle teeth in an open smile. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook, with 13 mm safety eyes, padded thighs and satin-stitch teeth and claws, and it stands about 17 cm (6.5 in) tall. The page gives the full row-by-row pattern with stitch counts and an interactive 3D model to check every piece, a fun make for any dinosaur fan.

Cómo tejer T-Rex a crochet

Avanzado · 17 cm de alto · unas 4 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 16 piezas en vueltas: Body, Head, Snout, Leg ×2, Thigh ×2, Tiny arm ×2, Tail, Spike ×6 (104 vueltas en total).
  2. Rellénalo y móntalo en 13 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 8 reunidos

RemixTejerlo

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 88 vueltas hechas

  19. Size before assembly: about 7.4 cm at the widest, 6.6 cm long; 22 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  20. Change to green (pull it through on the last yarn-over of R21).
  21. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  27. Size before assembly: about 9.1 cm at the widest, 7.5 cm long; 30 rounds.
  28. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  29. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  6. Size before assembly: an oval about 6.4 × 3.2 cm at the widest, 2.8 cm long; 9 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns.
  7. With green: ch 10.
  8. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  13. Size before assembly: an oval about 4.7 × 3.1 cm at the widest, 4.4 cm long; 14 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs front to back; the starting chain is at the bottom of the piece (on the finished toy). The round-start marker is at a turn of the oval, on the piece's centre line; R1 starts there, so no shift is needed. The increases fall on the turns.
  14. With green: ch 6.
  15. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  5. A flat oval about 4.5 × 2.9 cm; 4 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns.
  6. With green: ch 6.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  4. Size before assembly: about 1.1 cm at the widest, 1.3 cm long; 4 rounds.
  5. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  16. Size before assembly: about 4.9 cm at the widest, 5.6 cm long; 16 rounds.
  17. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  6. Of these: on the head — 2; on the body — 2; on the tail — 2. Size before assembly: about 2.2 cm at the widest, 1.3 cm long; 5 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Press the piece flat (the opening becomes a straight line), front and back walls together.<!-- flattened 85 % -->

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 13 mm (on the head): in round 13, 12 st apart (count along round 13: about 6 st each side of the centre front line).
  • Blush about 11 mm, dry pastel or blush (on the head, both sides): in round 17, 9.5 st from the centre front line, toward the toy's left . Colour pink.
  • Embroidery in brown thread (on the snout) (2, symmetric: the toy's left side is described, the right is its mirror image), straight stitches through: (in round 2, 3 st from the centre top line, toward the toy's left ) → (in round 2, 3 st from the centre top line, toward the toy's left ).
  • Satin stitch (on the snout): in dark red thread, a oval about 30 mm wide and 9.5 mm tall, horizontal stitches; centred in round 3, on the centre bottom line .
  • Satin stitch (on the snout): in white thread in several layers so it stands out, a triangle about 5.4 mm wide and 5.6 mm tall, horizontal stitches; centred between rounds 2 and 3, 2.5 st from the centre bottom line, toward the toy's left .
  • Satin stitch (on the snout): in white thread in several layers so it stands out, a triangle about 5.4 mm wide and 5.6 mm tall, horizontal stitches; centred in round 2, 1 st from the centre bottom line, toward the toy's left .
  • Satin stitch (on the snout): in white thread in several layers so it stands out, a triangle about 5.4 mm wide and 5.6 mm tall, horizontal stitches; centred in round 2, 1 st from the centre bottom line, toward the toy's right .
  • Satin stitch (on the snout): in white thread in several layers so it stands out, a triangle about 5.4 mm wide and 5.6 mm tall, horizontal stitches; centred between rounds 2 and 3, 2.5 st from the centre bottom line, toward the toy's right .
  • Satin stitch (on the leg) (2: one on each leg; the left one is described, the right is its mirror): in white thread, a oval about 4.4 mm wide and 3.6 mm tall, horizontal stitches; centred in round 6, 2 st from the centre front line, toward the toy's right.
  • Satin stitch (on the leg) (2: one on each leg; the left one is described, the right is its mirror): in white thread, a oval about 4.4 mm wide and 3.6 mm tall, horizontal stitches; centred in round 6, on the centre front line.
  • Satin stitch (on the leg) (2: one on each leg; the left one is described, the right is its mirror): in white thread, a oval about 4.4 mm wide and 3.6 mm tall, horizontal stitches; centred in round 6, 2 st from the centre front line, toward the toy's left.

Body · R1–R4

MR××××××VVVVVV×V×V×V

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    ×V×V×V×V××V××V××V××V××V×
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done