amigurumi
  • Catálogo
  • Taller
Crear
amigurumi
  • Catálogo
  • Patrones por animal
  • Acerca de
  • Ayuda
  • App para ChatGPT y Claude
  • Términos
  • Privacidad

Patrones sin cuentas ni confusiones. Con modelado geométrico por IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catálogo / Fantasía

Black Baby Dragon patrón de crochet

  • Equilibrado matemáticamenteComprobado por script: en las 96 vueltas los aumentos y disminuciones cuadran con el número de puntos.

por el generador de patronesFantasía

Dificultad
3/3
Tiempo
~4 h
Tamaño
12.1 cm
Rareza
1/5
TejerloHacer un remix
Descargar PDF gratis para imprimir

PDF A4: materiales, cada vuelta con casilla, montaje y cara

A crochet amigurumi inspired by Toothless from How to Train Your Dragon: a black baby dragon with big green eyes, ear flaps, small wings and a tail fin. About 12 cm tall in DK yarn with a 2.5 mm hook. A free pattern with every round counted, a 3D model to turn around and a printable PDF. Unofficial fan-made design, not affiliated with or endorsed by DreamWorks.

Cómo tejer Black Baby Dragon a crochet

Avanzado · 12 cm de alto · unas 4 h · hilo DK · ganchillo de 2.5 mm

  1. Teje las 15 piezas en vueltas: Body, Head, Ear flap ×2, Arm ×2, Leg ×2, Small ear flap ×2, Wing ×2, Tail, Tail fin, Red tail fin (120 vueltas en total).
  2. Rellénalo y móntalo en 10 pasos; cada uno se ilumina en el modelo 3D donde va.
  3. Haz la cara: ojos de seguridad por vuelta y punto, o bordados para menores de 3 años.

Cada vuelta con su número de puntos está en la pestaña Patrón de abajo y en el PDF gratis para imprimir.

Qué necesitas

Marca las cosas a medida que las reúnes.

0 de 8 reunidos

Muestra

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

RemixTejerlo

Cómo se teje

Vueltas continuas en espiral. No cierres las vueltas. Sube el marcador en cada vuelta.

Piezas

Idioma del patrónenrudefrDescargar PDF gratis para imprimirPDF
0 de 89 vueltas hechas

  14. Size before assembly: about 7.4 cm at the widest, 4.7 cm long; 17 rounds.
  15. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  24. Size before assembly: about 9.3 cm at the widest, 7.7 cm long; 30 rounds.
  25. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  26. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 12 stitches of the last round, pull tight and hide the end inside.

  8. Size before assembly: about 2.4 cm at the widest, 4.4 cm long; 13 rounds.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 2.3 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 24 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) -->

  6. Size before assembly: about 1.6 cm at the widest, 2.6 cm long; 8 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  7. Size before assembly: an oval about 3.8 × 3 cm at the widest, 2.7 cm long; 9 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 1 more (not counted in any round) and place the marker there. The increases fall on the turns.
  8. With char: ch 4.
  9. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  6. Size before assembly: about 2.3 cm at the widest, 1.8 cm long; 6 rounds.
  7. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff. Shape it into a spoon: push the front wall into the back wall (not down to a thin plate) — a concave spoon about 2.1 mm deep in front, a rounded back, and rounded folds of two layers at the sides (about 5.7 mm thick); about 23 mm wide. Keep the opening a curve, hollow side forward, not a straight line.<!-- (spoon 45 %) -->

  9. Flat motif — half circle (worked in turned rows, one layer of fabric), about 3.6 × 6.8 cm; 8 rows.
  10. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  7. Size before assembly: about 2.4 cm at the widest, 4.6 cm long; 13 rounds.
  8. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done. Bend ≈ 70° around round 9<!-- the bend spreads over 5 rounds -->. After stuffing, bend the piece so the inner side of the bend faces up on the finished toy (on the piece: in round 9, 1.5 st from the centre top line, toward the toy's left <!-- st 1.51 left -->). It is a gradual bend: with the needle and matching yarn run a line of stitches along the inner side from round 7 to round 11, one stitch in every round along one column, then pull the yarn until the piece bends to the angle (the inner side gathers by about 4 rounds) and fasten off inside.

  9. Flat motif — triangle (worked in turned rows, one layer of fabric), about 2.9 × 3.2 cm; 8 rows.
  10. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

  9. Flat motif — triangle (worked in turned rows, one layer of fabric), about 2.9 × 3.2 cm; 8 rows.
  10. Fasten off leaving a long tail (~30 cm) for sewing. Do not stuff. Weave in the starting tail, pin the motif out to shape on a soft surface and steam it lightly.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 20–24 mm (on the head): in round 17, 11 st apart (count along round 17: about 5.3 st each side of the centre front line). Iris iris #a9cf3c.
  • Embroidery in mouthc thread (on the head), straight stitches through: (between rounds 22 and 23, 2 st from the centre front line, toward the toy's right ) → (between rounds 23 and 24, 1 st from the centre front line, toward the toy's right ) → (between rounds 23 and 24, on the centre front line) → (between rounds 23 and 24, 1 st from the centre front line, toward the toy's left ) → (between rounds 22 and 23, 2 st from the centre front line, toward the toy's left ).
  • Satin stitch (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image): in mouthc thread, a oval about 2.5 mm wide and 2 mm tall, horizontal stitches; centred between rounds 20 and 21, 1 st from the centre front line, toward the toy's left .

Body · R1–R5

MR××××××VVVVVV×V×V×V

Nadie ha mostrado el suyo todavía. Sé la primera persona.

Entra para mostrar el tuyo

Aún no hay preguntas

Haz la primera: aquí leen tanto la autora como el asistente IA.

    Haz tuyo este amigurumi

    Ábrelo en el editor 3D: cambia los colores, el tamaño de cualquier pieza o pídeselo a la IA con palabras. Tu versión tendrá su propio patrón.

    Prueba a pedir:

    • Píntalo en tonos pastel
    • Hazlo más gordito
    • Ponle una bufanda pequeña
    Abrir en el editor 3DConvierte una foto en un patrón de crochet
    ×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abreviaturas

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done