amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux marins

Gamer Axolotl with Headphones modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 78 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux marins

Difficulté
3/3
Temps
~4 h
Taille
11.7 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet axolotl pattern: a Gamer Axolotl with Headphones amigurumi, about 12 cm tall in DK yarn with a 2.5 mm hook. A chubby pink axolotl with magenta gills sits wearing lime green headphones and holds a dark grey game controller with tiny coloured buttons. You need about 115 m of yarn: 60 m pink, 20 m hot pink, 15 m pale pink, 10 m lime green, 5 m dark grey and 5 m dark pink. Plan on roughly 4 hours. A great present for a gamer or a streamer friend, or a desk buddy to cheer on your own game nights. Spin the 3D model and follow the round-by-round pattern.

Comment crocheter Gamer Axolotl with Headphones

Avancé · 12 cm de haut · environ 4 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 18 pièces en rangs : Body, Head, Tail, Headphone cup ×2, Gill stalk ×6, Leg ×4, Game controller, Cheek ×2 (89 rangs au total).
  2. Rembourrez et assemblez en 11 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 11 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 70

  1. Size before assembly: about 8.4 cm at the widest, 7.2 cm long; 24 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre front line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. colours of round 1 in order: 1 sc in pale pink, 4 sc in pink, 1 sc in pale pink
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Size before assembly: an oval about 7.6 × 6 cm at the widest, 4.9 cm long; 20 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. With pink: ch 6.
  3. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  4. Press the piece flat to about 6.7 cm thick (oval cross-section).<!-- press the piece flat by 12 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 12 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 2.5 cm at the widest, 3.9 cm long; 12 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 1.1 cm thick.<!-- flattened 55 % --> Bend ≈ 40° around round 6<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's left on the finished toy (on the piece: in round 6, 0.5 st from the line on the toy's left side, upward). On the inner side draw rounds 6 and 7 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 5 st, pull to the angle and hide the end inside.

  1. Size before assembly: about 2.4 cm at the widest, 1.3 cm long; 5 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. Of these: top — 2 (left and right); mid — 2 (left and right); low — 2 (left and right). Size before assembly: about 1.6 cm at the widest, 3.9 cm long; 11 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Press the piece flat to about 9 mm thick (oval cross-section).<!-- press the piece flat by 45 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 1.6 cm at the widest, 3.4 cm long; 10 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat oval about 6.9 × 3.7 cm; 5 rounds. Worked around a chain, so it is an oval: sew it on with its long side (along the chain) running side to side. The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 4 more (not counted in any round) and place the marker there. The increases fall on the turns.
  2. With dark grey: ch 10.
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the head): in round 6, 22 st apart (count along round 6: about 10.8 st each side of the centre top line).
  • Embroidery in black thread (on the head), straight stitches through: (between rounds 4 and 5, 4.5 st from the centre bottom line, toward the toy's left ) → (in round 5, 3.5 st from the centre bottom line, toward the toy's left ) → (between rounds 5 and 6, 2 st from the centre bottom line, toward the toy's left ) → (in round 6, on the centre bottom line ) → (between rounds 5 and 6, 2 st from the centre bottom line, toward the toy's right ) → (in round 5, 3.5 st from the centre bottom line, toward the toy's right ) → (between rounds 4 and 5, 4.5 st from the centre bottom line, toward the toy's right ).
  • Strap (on the head) (2, symmetric: the toy's left side is described, the right is its mirror image): with lime green, ch 18 (≈ 5.4 cm); for a firmer strap sl st back along it. Sew it along (in round 11, 13 st from the centre top line, toward the toy's left ) → (between rounds 10 and 11, 9.5 st from the centre top line, toward the toy's left ) → (between rounds 9 and 10, 4.5 st from the centre top line, toward the toy's left ) → (between rounds 9 and 10, on the centre top line ), catching it every 2–3 ch.
  • Satin stitch (on the game controller): in light grey thread in several layers so it stands out, a oval about 9 mm wide and 9 mm tall, horizontal stitches; centred in round 2, on the centre top line , then moved 11 mm to the left and 2 mm down (looking at the toy's face).
  • Satin stitch (on the game controller): in light grey thread in several layers so it stands out, a oval about 9 mm wide and 9 mm tall, horizontal stitches; centred in round 2, on the centre top line , then moved 3 mm to the right and 4 mm down (looking at the toy's face).
  • Satin stitch (on the game controller): in blue thread in several layers so it stands out, a oval about 5 mm wide and 5 mm tall, horizontal stitches; centred in round 2, on the centre top line , then moved 13 mm to the right and 1 mm up (looking at the toy's face).
  • Satin stitch (on the game controller): in yellow thread in several layers so it stands out, a oval about 5 mm wide and 5 mm tall, horizontal stitches; centred in round 2, on the centre top line , then moved 10 mm to the right and 4.5 mm up (looking at the toy's face).
  • Satin stitch (on the game controller): in red thread in several layers so it stands out, a oval about 5 mm wide and 5 mm tall, horizontal stitches; centred in round 2, on the centre top line , then moved 16 mm to the right and 4.5 mm up (looking at the toy's face).

Abréviations

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
  • Satin stitch (on the game controller): in white thread in several layers so it stands out, a oval about 5 mm wide and 5 mm tall, horizontal stitches; centred in round 2, on the centre top line , then moved 13 mm to the right and 8 mm up (looking at the toy's face).