amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Axolotl in a Mushroom Hat modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 92 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
3/3
Temps
~4 h
Taille
9.3 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

A free crochet axolotl pattern for a lilac amigurumi axolotl with raspberry gills, wearing a red toadstool cap with white spots. The cap sits tilted on its head, and this axolotl plushie has a wide smile, rosy cheeks, stubby legs and a flat tail for a cozy cottagecore look. It is worked in the round in single crochet with DK yarn and a 2.5 mm hook, measures about 15 cm (6 in) long and 9 cm (3.7 in) tall, and has safety eyes, popcorn-stitch gills and a stuffed cap with sewn-on dots. Follow it row by row with stitch counts and turn the interactive 3D model to see where every piece goes.

Comment crocheter Axolotl in a Mushroom Hat

Avancé · 9 cm de haut · environ 4 h · fil DK · crochet de 2.5 mm

  1. Crochetez les 23 pièces en rangs : Body, Head, Tail, Gill stalk ×6, Leg ×4, Cheek ×2, Toadstool cap, Dot ×4, Small dot ×3 (103 rangs au total).
  2. Rembourrez et assemblez en 15 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 12 prêts

RemixCrocheter

Échantillon

1 sc ≈ 4 mm wide, 1 round ≈ 3.6 mm tall (10 cm ≈ 25 sc × 28 rounds); yarn about 1.9 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 82

  1. Size before assembly: about 6.8 cm at the widest, 7 cm long; 22 rounds. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. colours of round 1 in order: 2 sc in lilac, 2 sc in shell, 2 sc in lilac
  3. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff firmly, then press the piece slightly flat (oval cross-section; flattened 20 %).

  1. Size before assembly: an oval about 8.4 × 6.8 cm at the widest, 5.3 cm long; 22 rounds. The piece is oval: the rounds go around the chain, and on the finished toy the chain (the long side of the oval) runs side to side; the starting chain is at the front of the piece (on the finished toy). The round-start marker is in the middle of a long side (the piece's centre line), while R1 starts at a turn: after R1 shift the round start — sc 2 more (not counted in any round) and place the marker there. The increases fall on the turns. Multi-colour rounds are listed stitch by stitch from the round-start marker; keep the round start on the piece's centre top line (as it sits on the finished toy). The order is for right-handed crocheting (right to left on the outside); left-handed: reverse it.
  2. With lilac: ch 6.
  3. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  4. Press the piece flat to about 7.4 cm thick (oval cross-section).<!-- press the piece flat by 12 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 12 stitches of the last round, pull tight and hide the end inside.

  1. Size before assembly: about 4.3 cm at the widest, 6.1 cm long; 18 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff lightly only and press it flat to about 1.9 cm thick.<!-- flattened 55 % --> Bend ≈ 40° around round 6<!-- the bend spreads over 4 rounds -->. After stuffing, bend the piece so the inner side of the bend faces toward the toy's left on the finished toy (on the piece: in round 6, 0.5 st from the line on the toy's left side, upward <!-- st 0.59 up -->). On the inner side draw rounds 6 and 7 together (1 rounds go into the fold): with the needle and matching yarn make 3–4 stitches through the loops of both rounds over about 5 st, pull to the angle and hide the end inside.

  1. Of these: top — 2 (left and right); mid — 2 (left and right); low — 2 (left and right). Size before assembly: about 1.6 cm at the widest, 3.9 cm long; 11 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Press the piece flat to about 9 mm thick (oval cross-section).<!-- press the piece flat by 45 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Of these: front — 2 (left and right); back — 2 (left and right). Size before assembly: about 1.6 cm at the widest, 2.3 cm long; 7 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Stuff moderately just before sewing it on; a little less near the edge, then add a pinch when the seam is nearly done.

  1. A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 6.1 cm at the widest, 3.8 cm long; 18 rounds.
  2. Change to gill (pull it through on the last yarn-over of R13).
  3. → Start stuffing (moderately) and keep adding as you decrease.
  4. Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Of these: top — 1; front — 1; side — 2 (left and right). A flat circle about 1.5 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Of these: on the Toadstool cap — 3 (1 pair, left and right, and 1 single). A flat circle about 0.9 cm across; 1 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eyes with a printed glint 12 mm (on the head): in round 6, 22 st apart (count along round 6: about 10.8 st each side of the centre top line).
  • Embroidery in black thread (on the head), straight stitches through: (between rounds 4 and 5, 4.5 st from the centre bottom line, toward the toy's left ) → (in round 5, 3.5 st from the centre bottom line, toward the toy's left ) → (between rounds 5 and 6, 2 st from the centre bottom line, toward the toy's left ) → (in round 6, on the centre bottom line ) → (between rounds 5 and 6, 2 st from the centre bottom line, toward the toy's right ) → (in round 5, 3.5 st from the centre bottom line, toward the toy's right ) → (between rounds 4 and 5, 4.5 st from the centre bottom line, toward the toy's right ).

Abréviations

MR
magic ring
sc
single crochet
inc
2 sc in the same stitch
dec
single crochet two stitches together (invisible decrease recommended)
BLO
work the round in back loops only
FLO
work the round in front loops only
ch
chain
sl st
slip stitch
st
stitch
R5
round 5; R7–14 = rounds 7 to 14 are the same
(…) ×6
repeat 6 times
(24)
stitches in the round when it is done

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet