amigurumi
  • Catalogue
  • Atelier
Créer
amigurumi
  • Catalogue
  • Modèles par animal
  • À propos
  • Aide
  • Appli pour ChatGPT et Claude
  • Conditions
  • Confidentialité

Des modèles sans erreur de calcul et sans prise de tête. Avec une modélisation géométrique assistée par IA. © 2026

  • English
  • Русский
  • Español
  • Português
  • Deutsch
  • Français
Catalogue / Animaux

Winking Axolotl in a Scarf Ornament modèle au crochet

  • Équilibré mathématiquementVérifié par script : sur les 33 rangs, augmentations et diminutions correspondent au nombre de mailles.

par le générateur de modèlesAnimaux

Difficulté
1/3
Temps
~2 h
Taille
7 cm
Bizarrerie
1/5
CrocheterFaire un remix
Télécharger le PDF gratuit à imprimer

PDF A4 : matériel, chaque rang avec une case, assemblage et visage

Free crochet axolotl ornament pattern: a Winking Axolotl in a Scarf Ornament amigurumi, about 7 cm tall in fingering yarn with a 2.0 mm hook. It is a pink axolotl head with coral gills, a winking face and a teal striped scarf whose end doubles as the hanging loop. You need about 45 m of yarn: 15 m light pink, 10 m teal, 10 m coral, 5 m white and 5 m pink. Plan on roughly 2 hours. Make it as a a tree ornament or a gift for axolotl fans. Spin the 3D model and follow the round-by-round pattern.

Comment crocheter Winking Axolotl in a Scarf Ornament

Pour débutants · 7 cm de haut · environ 2 h · fil fingering · crochet de 2 mm

  1. Crochetez les 10 pièces en rangs : Axolotl head, Gill stalk ×6, Cheek ×2, Scarf-end hanging loop (41 rangs au total).
  2. Rembourrez et assemblez en 7 étapes ; chacune s’allume sur le modèle 3D là où va la pièce.
  3. Faites le visage : yeux de sécurité par rang et par maille, ou brodés pour les moins de 3 ans.

Chaque rang avec le nombre de mailles se trouve dans l’onglet Modèle ci-dessous et dans le PDF gratuit à imprimer.

Ce qu’il vous faut

Cochez au fur et à mesure que vous rassemblez le matériel.

0 sur 10 prêts

RemixCrocheter

Échantillon

1 sc ≈ 3 mm wide, 1 round ≈ 2.7 mm tall (10 cm ≈ 33 sc × 37 rounds); yarn about 1.4 mm thick. The gauge sets the size of the toy; crochet tightly so the stuffing does not show.

Comment c’est crocheté

En rangs continus en spirale. Ne fermez pas les rangs. Remontez le marqueur à chaque rang.

Pièces

Langue du modèleenrudefrTélécharger le PDF gratuit à imprimerPDF
0 rangs faits sur 36

  1. Size before assembly: about 5.3 cm at the widest, 5.4 cm long; 26 rounds.
  2. Change to teal (pull it through on the last yarn-over of R1).
  3. Change to white (pull it through on the last yarn-over of R3).
  4. Change to teal (pull it through on the last yarn-over of R4).
  5. Change to white (pull it through on the last yarn-over of R6).
  6. Change to teal (pull it through on the last yarn-over of R7).
  7. Change to light pink (pull it through on the last yarn-over of R9).
  8. → Insert the safety eyes now (positions: see “Face”) and fix the backs. Start stuffing (firmly) and keep adding as you decrease.
  9. Press the piece flat to about 4.9 cm thick (oval cross-section).<!-- press the piece flat by 8 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. Of these: top — 2 (left and right); mid — 2 (left and right); low — 2 (left and right). Size before assembly: about 1.1 cm at the widest, 2.1 cm long; 8 rounds.
  2. → Start stuffing (lightly) and keep adding as you decrease.
  3. Press the piece flat to about 6 mm thick (oval cross-section).<!-- press the piece flat by 45 % --> Top up the stuffing if needed. Fasten off leaving a 15 cm tail; with the needle weave it through the front loops of all 6 stitches of the last round, pull tight and hide the end inside.

  1. A flat circle about 1.1 cm across; 2 rounds.
  2. Fasten off leaving a long tail (30–40 cm) for sewing. Do not stuff.

  1. Size before assembly: about 1.7 cm at the widest, 1.4 cm long; 5 rounds. Each piece is two circles (front and back): make 2 circles — 1 as below (with the colours) and 1 plain in teal (same rounds, no colour changes).
  2. Change to white (pull it through on the last yarn-over of R1).
  3. Change to teal (pull it through on the last yarn-over of R2).
  4. Change to white (pull it through on the last yarn-over of R3).
  5. Change to teal (pull it through on the last yarn-over of R4).
  6. Fasten off. Hold a front and a plain circle wrong sides together and sc around through both layers: 18 sc. Do not stuff. Leave a long tail (~30 cm) for sewing.

Safety eyes and noses go in before the piece is stuffed and closed (see the pieces above); embroidery is easier before the piece is sewn on.

  • Safety eye with a printed glint 9 mm (on the axolotl head): between rounds 16 and 17, 5 st from the centre front line, toward the toy's right .
  • Embroidery in black thread (on the axolotl head), straight stitches through: (between rounds 14 and 15, on the centre front line ) → (between rounds 14 and 15, 1 st from the centre front line, toward the toy's right ) → (in round 15, 2 st from the centre front line, toward the toy's right ) → (between rounds 15 and 16, 3 st from the centre front line, toward the toy's right ) → (between rounds 16 and 17, 4 st from the centre front line, toward the toy's right ).
  • Embroidery in black thread (on the axolotl head), straight stitches through: (between rounds 14 and 15, on the centre front line ) → (between rounds 14 and 15, 1 st from the centre front line, toward the toy's left ) → (in round 15, 2 st from the centre front line, toward the toy's left ) → (between rounds 15 and 16, 3 st from the centre front line, toward the toy's left ) → (between rounds 16 and 17, 4 st from the centre front line, toward the toy's left ).
  • Embroidery in black thread (on the axolotl head), straight stitches through: (in round 16, 5 st from the centre front line, toward the toy's left ) → (in round 17, 5 st from the centre front line, toward the toy's left ) → (in round 17, 6 st from the centre front line, toward the toy's left ) → (in round 16, 6.5 st from the centre front line, toward the toy's left ).

Axolotl head · R1–R5

MR××××××VVVVVV×V×V×

Personne n’a encore montré le sien. Soyez la première personne.

Connectez-vous pour montrer le vôtre

Pas encore de questions

Posez la première : l’autrice et l’assistant IA lisent ici.

    Faites de cet amigurumi le vôtre

    Ouvrez-le dans l’éditeur 3D : changez les couleurs, la taille de chaque pièce, ou demandez à l’IA avec des mots. Votre version aura son propre patron.

    Essayez de demander :

    • Recolore-le en pastel
    • Rends-le plus dodu
    • Ajoute-lui une petite écharpe
    Ouvrir dans l’éditeur 3DTransformez une photo en patron au crochet
    V×V×V×V×V××V××V××V××V××V××××V×××V×××V×××V×××V×××V
    × scV incΛ dec

    Abréviations

    MR
    magic ring
    sc
    single crochet
    inc
    2 sc in the same stitch
    dec
    single crochet two stitches together (invisible decrease recommended)
    BLO
    work the round in back loops only
    FLO
    work the round in front loops only
    ch
    chain
    sl st
    slip stitch
    st
    stitch
    R5
    round 5; R7–14 = rounds 7 to 14 are the same
    (…) ×6
    repeat 6 times
    (24)
    stitches in the round when it is done